In order to investigate the factors affecting the acoustic performance of the extrinsic Fabry–Perot interferometer (EFPI) fiber-optic acoustic pressure sensor and to effectively improve its detection capability, this paper enhances the sensor’s detection sensitivity by adding more sensitized rings to its acoustic pressure-sensitive film. Furthermore, a novel real-time coupled acoustic test method is proposed to simultaneously monitor the changes in the spectral and acoustic metrics of the sensor to characterize its overall performance. Finally, an EFPI-type fiber-optic acoustic pressure sensor was developed based on the Micro-Optical Electro-Mechanical System (MOEMS). The acoustic tests indicate that the optimized fiber-optic acoustic pressure sensor has a sensitivity as high as 2253.2 mV/Pa, and the acoustic overload point (AOP) and signal-to-noise ratios (SNRs) can reach 108.85 dB SPL and 79.22 dB, respectively. These results show that the sensor produced through performance characterization experiments and subsequent optimization has a very high acoustic performance index, which provides a scientific theoretical basis for improving the overall performance of the sensor and will have broad application prospects in the field of acoustic detection.

In the field of inter-satellite laser communication, achieving high-quality communication and compensating for the Doppler frequency shift caused by relative motion necessitate lasers with narrow linewidths, low phase noise, and the ability to achieve mode-hop-free tuning within a specific range. To this end, this paper investigates a novel external cavity diode laser (ECDL) with a frequency-selective F-P etalon structure, leveraging the external cavity F-P etalon structure in conjunction with an auxiliary filter to achieve single longitudinal mode selection. The laser undergoes linewidth testing using a delayed self-heterodyne beating method, followed by the testing of its phase noise and frequency noise characteristics using a noise analyzer, yielding beat spectra and noise power spectral density profiles. Furthermore, the paper introduces an innovative bidirectional temperature-scanning laser method to achieve optimal laser-operating point selection and mode-hop-free tuning. The experimental results showcase that the single longitudinal mode spectral side-mode suppression ratio (SMSR) is around 70 dB, and the output power exceeds 10 mW. Enhancing the precision of the F-P etalon leads to a more pronounced suppression of low-frequency phase noise, reducing the Lorentzian linewidth from the initial 10 kHz level to a remarkable 5 kHz level. The bidirectional temperature-scanning laser method not only allows for the selection of the optimal operating point but also enables mode-hop-free tuning within 160 pm.

To meet the demands of laser communication, quantum precision measurement, cold atom technology, and other fields for narrow linewidth and low-noise light sources, an external cavity diode laser (ECDL) operating in the wavelength range around 780 nm was set up with a Fabry–Pérot etalon (F–P) and an interference filter (IF) in the experiment. The interference filter type ECDL (IF–ECDL) with butterfly-style packaging configuration has continuous wavelength tuning within a specified range through precise temperature and current control and has excellent single-mode characteristics. Experimental results indicate that the output power of the IF–ECDL is 14 mW, with a side-mode suppression ratio (SMSR) of 54 dB, a temperature-controlled mode-hop-free tuning range of 527 GHz (1.068 nm), and an output linewidth of 570 Hz. Compared to traditional lasers operating at 780 nm, the IF–ECDL exhibits narrower linewidth, lower noise, and higher spectral purity, and its dimensions are merely 25 × 15 × 8.5 mm³ weighing only 19.8 g, showcasing remarkable miniaturization and lightweight advantages over similar products in current research fields.