The effects of journal misalignment on a journal bearing caused by an asymmetric rotor structure are presented in this study. A new model considering the asymmetric deflection is applied. Also, the thermo-hydrodynamic of the oil film in the journal bearing and straightforward elasticity theory are considered in the analysis. Based on the structure stiffness equivalent characteristic, a simple stepped shaft can reflect the entire complex structure model. The existing lubrication model, which does not consider this angle component, is not very precise for journal bearings. Film pressure, misalignment angle, velocity field, oil leakage, and temperature field were calculated and compared in the journal bearing analysis. The results indicate that bearing performances are greatly affected by misalignment caused by the asymmetric structure. A simple stepped shaft can effectively represent a misaligned journal bearing in a rotor-bearing system.
13 June 2015 in Journal of Zhejiang University-SCIENCE A
Running conditions for piston pin boss bearing have become very severe due to the high combustion pressure and piston temperature increase over the past te
Much research and practical experience have shown that the utilization of textures has an enhancing effect on the performance of dynamic seals and the dynamic pressure lubrication of gas bearings. In order to optimize the performance of floating ring seals, this study systematically analyzes the effects of different texture shapes and their parameters. The Reynolds equation of the gas is solved by the successive over-relaxation (SOR) iteration method. The pressure and thickness distributions of the seal gas film are solved to derive the floating force, end leakage, friction, and the ratio of buoyancy to leakage within the seal. The effects of various texture shapes, including square, 2:1 rectangle, triangle, hexagon, and circle, as well as their parameters, such as texture depth, angle, and area share, on the sealing performance are discussed. Results show that the texture can increase the air film buoyancy and reduce friction, but it also increases the leakage by a small amount. Square textures and rectangular textures are relatively effective. The deeper the depth of the texture within a certain range, the better the overall performance of the floating ring seal. As the texture area percentage increases, leakage tends to increase and friction tends to decrease. A fractal roughness model is developed, the effect of surface roughness on sealing performance is briefly discussed, and finally the effect of surface texture with roughness is analyzed. Some texture parameters that can significantly optimize the sealing performance are obtained. Rectangular textures with certain parameters enhance the buoyancy of the air film by 81.2%, which is the most significant enhancement effect. This rectangular texture reduces friction by 25.8% but increases leakage by 79.5%. The triangular textures increase buoyancy by 28.02% and leakage increases by only 10.08% when the rotation speed is 15,000 r/min. The results show that texture with appropriate roughness significantly optimizes the performance of the floating ring seal.
Taking an aviation hydraulic pipeline as the research object, a fluid–solid coupling vibration model of the pipeline system, considering the influence of the clamp, is established. The clamp is equivalent to the combined form of the constraint point and the pipeline. The equivalent stiffness of the clamp in each direction is obtained via the finite element method and substituted into the vibration model. The vibration response of the hydraulic pipeline system is obtained by changing the boundary conditions. The validity and accuracy of the vibration model were verified via the finite element method. The results show that the maximum error of the natural frequency of the pipeline system is within the acceptable range, which can prove that the model can better simulate the dynamic characteristics of the pipeline system and has a certain engineering reference value for the vibration analysis of hydraulic pipelines in aviation.