Yuhang Guo

Mr. Yuhang Guo

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 July 2024 in Lubricants
Verified
Journal Article
Open access
PDF file
Zhenpeng HeZhenpeng He
Zhenpeng He
YGYuhang Guo
Yuhang Guo
JSJiaxin Si
Jiaxin Si
NLNing Li
Ning Li
LJLanhao Jia
Lanhao Jia
HWHongyu Wang
Hongyu Wang
Much research and practical experience have shown that the utilization of textures has an enhancing effect on the performance of dynamic seals and the dynamic pressure lubrication of gas bearings. In order to optimize the performance of floating ring seals, this study systematically analyzes the effects of different texture shapes and their parameters. The Reynolds equation of the gas is solved by the successive over-relaxation (SOR) iteration method. The pressure and thickness distributions of the seal gas film are solved to derive the floating force, end leakage, friction, and the ratio of buoyancy to leakage within the seal. The effects of various texture shapes, including square, 2:1 rectangle, triangle, hexagon, and circle, as well as their parameters, such as texture depth, angle, and area share, on the sealing performance are discussed. Results show that the texture can increase the air film buoyancy and reduce friction, but it also increases the leakage by a small amount. Square textures and rectangular textures are relatively effective. The deeper the depth of the texture within a certain range, the better the overall performance of the floating ring seal. As the texture area percentage increases, leakage tends to increase and friction tends to decrease. A fractal roughness model is developed, the effect of surface roughness on sealing performance is briefly discussed, and finally the effect of surface texture with roughness is analyzed. Some texture parameters that can significantly optimize the sealing performance are obtained. Rectangular textures with certain parameters enhance the buoyancy of the air film by 81.2%, which is the most significant enhancement effect. This rectangular texture reduces friction by 25.8% but increases leakage by 79.5%. The triangular textures increase buoyancy by 28.02% and leakage increases by only 10.08% when the rotation speed is 15,000 r/min. The results show that texture with appropriate roughness significantly optimizes the performance of the floating ring seal.

22 November 2024 in Lubricants
Verified
Journal Article
Open access
PDF file
Zhenpeng HeZhenpeng He
Zhenpeng He
LJLanhao Jia
Lanhao Jia
JSJiaxin Si
Jiaxin Si
NLNing Li
Ning Li
HWHongyu Wang
Hongyu Wang
WLWendong Luo
Wendong Luo
High-speed segmented annular seals are often subjected to friction and wear, and the groove design on the sealing surface can effectively suppress this loss. For the purpose of improving the sealing performance, the segmented annular seal models of three structures are established, and the accuracy of the calculation model is verified by comparing with the previous results. Through fluid–solid–thermal coupled analysis, the flow field characteristics, opening characteristics, and leakage characteristics of the segmented annular seal under high working condition parameters were studied. The results show that the setting of the shallow groove forms the hydrodynamic effect by squeezing and hindering the flow of fluid in the clearance. The increase in rotational speed and pressure difference can promote the increase in the opening force, while the temperature has no significant effect on the opening of the seal. Seals with ladder-like grooves have the best opening performance, and seals without shallow grooves are already difficult to open under conditions of high pressure difference and large spring forces. Temperature and pressure difference are the main factors affecting the leakage of the seal, while the influence of the rotation speed is small. When the sealed pressure increases from 0.15 MPa to 0.4 MPa, the maximum increase in the leakage of the seal with specific groove design is 4.657 times the original. As the temperature rises from 420 K to 620 K, the maximum decrease in the three structures is up to 22.9%. Among the seals of the three structures, seals with ladder-like grooves have medium leakage. This research will contribute to the improvement of research methods for the sealing performance of segmented annular rings, especially for the evaluation of groove design and opening characteristics.

12 December 2024 in Lubricants
Verified
Journal Article
Open access
PDF file
Zhenpeng HeZhenpeng He
Zhenpeng He
YZYuchen Zou
Yuchen Zou
JSJiaxin Si
Jiaxin Si
ZLZiyi Lei
Ziyi Lei
NLNing Li
Ning Li
YGYuhang Guo
Yuhang Guo
To investigate how texture affects the sealing performance of compliant foil, a systematic analysis was conducted on the impact of various bottom shapes of rectangular textures on the gas film sealing performance of the foil. The Reynolds equation for the compliant foil seal is solved using the finite difference method., and the average gas film pressure, bearing capacity, leakage, and friction performance parameters of the compliant foil gas film seal are obtained. The results indicate that the convergent right triangle bottom shape texture provides the best sealing performance, with the average gas film pressure reaching 1.457. This is 0.10% higher than the non-textured case and 0.55% higher than the horizontal bottom shape texture. For the same texture area ratio, increasing the texture length in the axial direction improves the dynamic pressure effect. When the aspect ratio is 2/1, the gas film pressure reaches its maximum, and leakage is minimized. With an area ratio of 0.25 and a depth of 5 μm, the compliant foil gas film seal achieves the highest pressure and the lowest leakage. Compared with the average pressure without texture, the average pressure can be increased by 0.83%, and the leakage can be reduced by 6.61%.

30 July 2026 in Lubricants
Verified
Journal Article
Open access
PDF file
JQJunze Qian
Junze Qian
BZBowen Zhang
Bowen Zhang
YDYuhang Dai
Yuhang Dai
YGYuhang Guo
Yuhang Guo
SZShijun Zhao
Shijun Zhao
Zhenpeng HeZhenpeng He
Zhenpeng He
As an advanced non-contact dynamic sealing technology, compliant foil seals offer notable advantages, including a simple structure, light weight, ease of installation, and strong self-adaptability. However, in most designs, the foil stiffness is uniform, resulting in a substantial increase in gas leakage under high inlet pressures. Considering the distinct pressure conditions in compliant foil seals, a variable foil thickness model (VTM) along the axial direction is designed to match the pressure gradient from the inlet to the outlet. By aligning the foil thickness variation with the pressure gradient, the foil deformation is more uniformly distributed axially, thereby maintaining low leakage under high-pressure differentials. In this study, the gas film thickness equation and the Reynolds equation for the compliant foil seal are established and solved using the finite difference method combined with a point-wise iterative approach. First, the static characteristics of a traditional uniform-stiffness compliant foil seal under different rotational speeds and inlet pressures are analyzed. The results indicate that leakage increases substantially under high inlet pressure. The performance of the VTM under different operating conditions—including rotational speed and inlet pressure—is investigated. The results show that an appropriately designed VTM can maintain very low leakage under high-parameter conditions, albeit with some sacrifice in gas film pressure and an increase in viscous friction. Furthermore, surface micro-textures are integrated with the VTM. The study finds that the two approaches exhibit complementary effects: micro-textures enhance the dynamic pressure effect of VTM, while the variable-thickness design maintains extremely low leakage. The combined model demonstrates excellent performance across different speeds and inlet pressures. For instance, at a rotational speed of 30,000 r/min, the gas leakage is reduced by 50.04%, and the maximum gas film pressure is increased by 70%.