Magnetic detection technology has wide applications in the fields of geological exploration, biomedical treatment, wreck removal and localization of unexploded ordinance. A large number of methods have been developed to locate targets with static magnetic fields, however, the relation between the problem of localization of moving objectives with alternating magnetic fields and the localization with a static magnetic field is rarely studied. A novel method of target localization based on coherent demodulation was proposed in this paper. The problem of localization of moving objects with an alternating magnetic field was transformed into the localization with a static magnetic field. The Levenberg-Marquardt (L-M) algorithm was applied to calculate the position of the target with magnetic field data measured by a single three-component magnetic sensor. Theoretical simulation and experimental results demonstrate the effectiveness of the proposed method.
8 May 2023 in IEEE Geoscience and Remote Sensing Letters
As an important physical field feature, magnetic anomaly is widely used in the detection of marine ferromagnetic targets. Influenced by the complex ocean measurement environment, the collected magnetic data are usually contaminated with noise, and traditional magnetic anomaly detection methods are less versatile due to the specific conditions required. Faced with the challenging situations in the ocean, the use of deep learning methods can not only automatically extract discriminative features from the magnetic data, but also reduce manual interference in the detection model design. Deep learning requires a large amount of data to train the model, but the real target magnetic anomaly data is expensive to acquire and small in number. In this letter, we propose a multi-task deep transfer learning model for simultaneous denoising and detection of marine target magnetic anomaly data under limited labelled samples. Specifically, a convolutional denoising auto-encoder (CDAE) network is designed for adaptive background noise modeling and discriminative feature learning. Meanwhile, a fully connected classification (FCC) network is cascaded and jointly trained with it for simultaneous noise filtering and anomaly detection. To guarantee sufficient learning effect, both real measured data from sea trials and simulated data from magnetic dipole model are used for training the network in a two-stage manner. During the experiments, the learned multi-task deep model is respectively used to denoise the marine magnetic data and detect target anomaly signal. It achieves both superior noise-removal and anomaly discovery performance than the traditional methods, and meanwhile is much more efficient.
Relative orientation estimation between the hand and its fingers is important in many applications, such as virtual reality (VR), augmented reality (AR) and rehabilitation. It is still quite a big challenge to do the estimation by only exploiting inertial measurement units (IMUs) because of the integration drift that occurs in most approaches. When the hand is functionally used, there are many instances in which hand and finger tips move together, experiencing almost the same angular velocities, and in some of these cases, almost the same accelerations are measured in different 3D coordinate systems. Therefore, we hypothesize that relative orientations between the hand and the finger tips can be adequately estimated using 3D IMUs during such designated events (DEs) and in between these events. We fused this extra information from the DEs and IMU data with an extended Kalman filter (EKF). Our results show that errors in relative orientation can be smaller than five degrees if DEs are constantly present and the linear and angular movements of the whole hand are adequately rich. When the DEs are partially available in a functional water-drinking task, the orientation error is smaller than 10 degrees.
The performance of Scalar Triangulating and Ranging (STAR) method is limited by the asphericity error. Some iterative strategies are proposed to reduce the error and the performance has been improved. However, iterative methods are still facing problems such as multiple iterations, singularity and limited accuracy. In light of this situation, an eigenvalue method which is primarily based on the property of gradient tensor eigenvalues is proposed, a new rotationally invariant scalar related to eigenvalues is used to replace the old one, which can eliminate the asphericity error radically. Furthermore, a new strategy for estimating the length of bearing vector is proposed, which is simpler and can be used to avoid singular problems. The formula for estimating the bearing vector is more concise and direct with these two major improvements. The results show the performance of eigenvalue method performs better than STAR method and iterative method.
As an effective physical field feature to perceive ferromagnetic targets, magnetic anomaly is widely used in covert marine surveillance tasks. However, its practical usability is affected by the complex marine magnetic noise interference, making robust magnetic anomaly detection (MAD) quite a challenging task. Recently, learning-based detectors have been widely studied for the discrimination of magnetic anomaly signal and achieve superior performance than traditional rule-based detectors. Nevertheless, learning-based detectors require abundant data for model parameter training, which are difficult to access in practical marine applications. In practice, target magnetic anomaly data are usually expensive to acquire, while rich marine magnetic noise data are readily available. Thus, there is an urgent need to develop effective models to learn discriminative features from the abundant marine magnetic noise data for newly appearing target anomaly detection. Motivated by this, in this paper we formulate MAD as a single-edge detection problem and develop a self-supervised marine noise learning approach for target anomaly classification. Specifically, a sparse autoencoder network is designed to model the marine noise and restore basis geomagnetic field from the collected noisy magnetic data. Subsequently, reconstruction error of the network is used as a statistical decision criterion to discriminate target magnetic anomaly from cluttered noise. Finally, we verify the effectiveness of the proposed approach on real sea trial data and compare it with seven state-of-the-art MAD methods on four numerical indexes. Experimental results indicate that it achieves a detection accuracy of 93.61% and has a running time of 21.06 s on the test dataset, showing superior MAD performance over its counterparts.
Magnetic detection techniques have been widely used in many fields, such as virtual reality, surgical robotics systems, and so on. A large number of methods have been developed to obtain the position of a ferromagnetic target. However, the angular rotation of the target relative to the sensor is rarely studied. In this paper, a new method for localization of moving object to determine both the position and rotation angle with three magnetic sensors is proposed. Trajectory localization estimation of three magnetic sensors, which are collinear and noncollinear, were obtained by the simulations, and experimental results demonstrated that the position and rotation angle of ferromagnetic target having roll, pitch or yaw in its movement could be calculated accurately and effectively with three noncollinear vector sensors.