Alkali-activation (or geopolymer) technology has gained a great deal of interest for its potential applications in water and wastewater treatment during the last decade. Alkali-activated materials can be prepared via a relatively simple and low-energy process, most commonly by treating aluminosilicate precursors with concentrated alkali hydroxide and/or silicate solutions at (near) ambient conditions. The resulting materials are, in general, amorphous, have good physical and chemical stability, ion-exchange properties, and a porous structure. Several of the precursors are industrial by-products or other readily available low-cost materials, which further enhances the environmental and economic feasibility. The application areas of alkali-activated materials in water and wastewater treatment are adsorbents/ion-exchangers, photocatalysts, high-pressure membranes, filter media, anti-microbial materials, pH buffers, carrier media in bioreactors, and solidification/stabilization of water treatment residues. The purpose of this review is to present a comprehensive evaluation of the rapidly growing prospects of alkali-activation technology in water and wastewater treatment.

Lithium‐ion batteries (LIBs) are promising candidates within the context of the development of novel battery concepts with high energy densities. Batteries with high operating potentials or high voltage (HV) LIBs (>4.2 V vs Li⁺/Li) can provide high energy densities and are therefore attractive in high‐performance LIBs. However, a variety of challenges (including solid electrolyte interface (SEI), lithium plating, etc.) and related safety issues (such as gas formation or thermal runaway effects) must be solved for the practical, widespread application of HV‐LIBs. Most of these challenges arise in the region between the electrodes: the electrolyte region. This review provides an overview of recent development and progress on the electrolyte region, including liquid electrolytes, ionic liquids, gel polymer electrolytes, separators, and solid electrolytes for HV‐LIBs applications. A focus on improving the safety of these systems, with some perspectives on their relative cost and environmental impact, is given. Overall, the new information is encouraging for the development of HV‐LIBs, and this review serves as a guide for potential strategies to improve their safety, allowing the development of HV‐LIBs, including solid‐state batteries, to be accelerated to practical relevance.