Anindita Paul

Dr. Anindita Paul

orcid

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 June 2019 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
APAnindita Paul
Anindita Paul
JRJaime Ramirez-Angulo
Jaime Ramirez-Angulo
Antonio J. Lopez-MartinAntonio J. Lopez-Martin
Antonio J. Lopez-Martin
RCRamon Gonzalez Carvajal
Ramon Gonzalez Carvajal
JRJose Miguel Rocha-Perez
Jose Miguel Rocha-Perez
A simple technique to implement highly power efficient class AB-AB Miller op-amps is presented in this paper. It uses a composite input stage with resistive local common mode feedback that provides class AB operation to the input stage and essentially enhances the op-amp's effective transconductance gain, the dc open-loop gain, the gain-bandwidth product, and slew rate with just moderate increase in power dissipation. The experimental results of op-amps in strong inversion and subthreshold fabricated in a 130-nm standard CMOS technology validate the proposed approach. The op-amp has 9 V · pF/μs· μW large-signal figure of merit (FOM) and 17 MHz· pF/μW small-signal FOM with 1.2-V supply voltage. In subthreshold, the op-amp has 10 V· pF/μs· μW large-signal FOM and 92 MHz· pF/μW small-signal FOM with 0.5-V supply voltage.

1 October 2008 in Research in Gerontological Nursing
Verified
Journal Article
Closed access
PDF file
GAGregory L. Alexander
Gregory L. Alexander
MRMarilyn Rantz
Marilyn Rantz
MSMarjorie Skubic
Marjorie Skubic
MAMyra A. Aud
Myra A. Aud
BWBonnie Wakefield
Bonnie Wakefield
APAnindita Paul
Anindita Paul
This article provides results of an expert review of data displays for a sensor system used to monitor functional abilities in older adults. The research took place at TigerPlace, an assisted living facility where the sensor system is currently being evaluated. A checklist of 16 heuristic criteria was used to evaluate the sensor data displays, with consideration to the users of the system: residents, their families, and health care providers. Results of this expert review indicate that flexibility and efficiency of use, help and documentation, navigation, and skills were not well developed in the sensor data displays. Conversely, sensor data displays were rated highly for their aesthetic value and the ample visual contrast on the main display components. Through the use of a sensor system, new ways of detecting functional decline in elderly residents of assisted living facilities can be accomplished.

12 April 2021 in IEEE Access
Verified
Journal Article
Open access
APAnindita Paul
Anindita Paul
JRJaime Ramirez-Angulo
Jaime Ramirez-Angulo
ASAlejandro Diaz Sanchez
Alejandro Diaz Sanchez
Antonio J. Lopez-MartinAntonio J. Lopez-Martin
Antonio J. Lopez-Martin
RCRamon Gonzalez Carvajal
Ramon Gonzalez Carvajal
FLFrank X. Li
Frank X. Li
A fully differential Miller op-amp with a composite input stage using resistive local common-mode feedback and regulated cascode transistors is presented here. High gain pseudo-differential auxiliary amplifiers are used to implement the regulated cascode transistors in order to boost the output impedance of the composite input stage and the open-loop gain of the op-amp. Both input and output stages operate in class AB mode. The proposed op-amp has been simulated in a 130nm commercial CMOS process technology. It operates from a 1.2V supply and has a close to rail-to-rail differential output swing. It has 156dB DC open-loop gain and 63MHz gain-bandwidth product with a 30pF capacitive load. The op-amp has a DC open-loop gain figure of merit $FOM_{AOLDC}$ of 174 (MV/V) MHz pF/ $\mu \text{W}$ and large-signal figure of merit $FOM_{LS} $ of 3(V/ $\mu \text{s}$ ) pF/ $\mu \text{W}$ .

9 November 2018 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
APAnindita Paul
Anindita Paul
JRJaime Ramirez-Angulo
Jaime Ramirez-Angulo
Antonio J. Lopez-MartinAntonio J. Lopez-Martin
Antonio J. Lopez-Martin
RCRamon Gonzalez Carvajal
Ramon Gonzalez Carvajal
A CMOS fully integrated all-pass filter with an extremely low pole frequency of 2 Hz is introduced in this paper. It has 0.08-dB passband ripple and 0.029-mm²Si area. It has 0.38-mW power consumption in strong inversion with ± 0.6-V power supplies. In subthreshold, it has 0.64-μW quiescent power and operates with ± 200-mV dc supplies. Miller multiplication is used to obtain a large equivalent capacitor without excessive Si area. By varying the gain of the Miller amplifier, the pole frequency can be varied from 2 to 48 Hz. Experimental and simulation results of a test chip prototype in 130-nm CMOS technology validate the proposed circuit.

22 March 2019 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
APAnindita Paul
Anindita Paul
JRJaime Ramirez-Angulo
Jaime Ramirez-Angulo
Antonio TorralbaAntonio Torralba
Antonio Torralba
This paper describes a bandwidth (BW)- and slew rate (SR)-enhanced class AB voltage follower (VF). A thorough small signal analysis of the proposed and a state-of-the-art AB-enhanced VF is presented to compare their performance. The proposed circuit has 50-MHz BW, 19.5-V/μs SR, and a BW figure of merit of 41.6 (MHz x pF/μW) for CL = 50 pF. It provides 13 times higher current efficiency and 15 times higher BW than the conventional VF with equal 60-μW static power dissipation. The experimental and simulation results of a fabricated test chip in the 130-nm CMOS technology validate the proposed circuit.

4 May 2021 in IEEE Access
Verified
Journal Article
Open access
APAnindita Paul
Anindita Paul
JRJaime Ramirez-Angulo
Jaime Ramirez-Angulo
ASAlejandro Diaz Sanchez
Alejandro Diaz Sanchez
Antonio J. Lopez-MartinAntonio J. Lopez-Martin
Antonio J. Lopez-Martin
Ramon Gonzalez CarvajalRamon Gonzalez Carvajal
Ramon Gonzalez Carvajal
FLFrank X. Li
Frank X. Li
A compact power-efficient class-AB Miller op-amp is introduced. It uses a simple auxiliary circuit that enhances the op-amp’s gain-bandwidth product and helps to drive a wide range of capacitive and resistive loads with high static and dynamic current efficiency. Simple Miller compensation is used to obtain stability over a wide range of loading conditions. The op-amp’s simulation and experimental results in strong inversion with $15\mu \text{A}$ bias current and in sub-threshold with 250nA bias current are shown. Its performance is measured in terms of dynamic and static current efficiency figures of merit FOM CEDyn and FOM CEStat . and using the conventional small-signal figure of merit FOM SS . Experimental results of op-amps fabricated in a 130nm CMOS technology are shown that validate the proposed approach.