In this paper, a basic cell for low-power and/or low-voltage operation is identified. It is evidenced how different versions of this cell, coined as "flipped voltage follower (FVF)" have been used in the past for many applications. A detailed classification of basic topologies derived from the FVF is given. In addition, a comprehensive list of recently proposed low-voltage/low-power CMOS circuits based on the FVF is given. Although the paper has a tutorial taste, some new applications of the FVF are also presented and supported by a set of simulated and experimental results. Finally, a design example showing the application of the FVF to build systems based on translinear loops is described which shows the potential of this cell for the design of high-performance low-power/low-voltage analog and mixed-signal circuits.

A simple technique to achieve low-voltage power-efficient class AB operational transconductance amplifiers (OTAs) is presented. It is based on the combination of class AB differential input stages and local common-mode feedback (LCMFB) which provides additional dynamic current boosting, increased gain-bandwidth product (GBW), and near-optimal current efficiency. LCMFB is applied to various class AB differential input stages, leading to different class AB OTA topologies. Three OTA realizations based on this technique have been fabricated in a 0.5-/spl mu/m CMOS technology. For an 80-pF load they show enhancement factors of slew rate and GBW of up to 280 and 3.6, respectively, compared to a conventional class A OTA with the same 10-/spl mu/A quiescent currents and /spl plusmn/1-V supply voltages. In addition, the overhead in terms of common-mode input range, output swing, silicon area, noise, and static power consumption, is minimal.

A novel design principle for very low-voltage analog signal processing in CMOS technologies is presented. It is based on the use of quasi-floating gate (QFG) MOS transistors. Similar to multiple input floating gate (MIFG) MOS transistors, a weighted averaging of the inputs accurately controlled by capacitance ratios can be obtained, which is the basic operating principle. Nevertheless, issues often encountered in MIFG structures, such as the initial charge trapped in the floating gates or the gain-bandwidth product degradation, are not present in QFG configurations. Several CMOS circuit realizations using open- and closed-loop topologies, have been designed. They include analog switches, mixers, programmable-gain amplifiers, track and hold circuits, and digital-to-analog converters. All these circuits have been experimentally verified, confirming the usefulness of the proposed technique for very low-voltage applications.

A simple and efficient low-voltage two-stage operational amplifier with Class-AB output stage is introduced. It has a large effective output current boosting factor (/spl sim/50) and close to a factor 2 bandwidth enhancement. This is achieved at the expense of minimum increase in circuit complexity and no additional static power dissipation. Experimental verification of the characteristics of the proposed circuit is provided.

In this paper a new basic cell for low-power and/or low-voltage operation is identified. It is shown that different versions of this cell, called "flipped voltage follower", have been used in the past for different applications. New circuits using this cell are also proposed here.

A new family of single-stage super Class-AB operational transconductance amplifiers (OTAs) suitable for low-voltage operation and low power consumption is presented. Three novel topologies are proposed featuring simplicity and compactness. They are based on the combination of adaptive biasing techniques for the differential input stage and nonlinear current mirrors for the active load that provide additional dynamic current boosting. The OTAs have been fabricated in a standard 0.5-mum CMOS process. Experimental results show a greatly improved slew rate by factors 30-60 and gain-bandwidth product by factors 11.5-17 when compared to a classical Class-A OTA. The circuits are operated at plusmn1-V supply voltage with only 10 muA of bias current