California’s Central Valley offers vast opportunities for CO2 storage in deep saline aquifers. We conducted an induced seismicity hazard assessment for a potential injection site in the southern San Joaquin Basin for 18 years of injection at 0.68 MtCO2/yr and 100 years of monitoring. We mapped stress, faults, and seismicity in a 30 km radius around the site to build a geomechanical model and resolve the stresses on major faults. From a 3D hydromechanical simulation of the CO2 plume, we calculated the change in pressure over time on these faults and determined the conditions for safe injection. Lacking any subsurface imaging, we also conducted a probabilistic fault slip analysis using numerous random distributions of faults and a range of geomechanical parameters. Our results show that the change in probability of fault slip can be minimized by controlling the size, migration, and magnitude of the pressure plume. We also constructed a seismic catalog for the last 20 years around the site and characterized the natural patterns of seismicity. We use these results to establish criteria for evaluating potential-induced events during the storage period and to develop a traffic light response system. This study represents a first-order procedure to evaluate the seismic hazards presented by CO2 storage and incorporate uncertainties in hydrological and geomechanical parameters.
Summary: The work demonstrates an optimal well design for a potential geological carbon storage (GCS) project in Kern County, California (USA). Carbon dioxide (CO2) plume shape, size, and pressure response history in the subsurface are outcomes. We created a toolbox (pyCCUS) to standardize the well design optimization process and it is applicable to different carbon storage assets. This toolbox is helpful to maximize storage security and minimize geomechanical risk. The numerical model of the storage formation features two-way coupled transport and geomechanical deformation. It honors a predefined injection scheme with injection rates that ramp up and then decline for a total of 12.3 MtCO2 injection in 18 years. The peak injection rate is greater than 1 MtCO2/yr, whereas the post-injection monitoring period is 100 years. We propose to develop a long, deviated injection well to best address the injectivity and plume migration challenges for this complex, heterogeneous, dipping formation. The chosen well trajectory improves injectivity while minimizing formation pressure buildup. The well design optimization successfully reduces the pressure buildup by 54% over the base design while only increasing the areal extent of the plume by 21%. We quantify the CO2 plume shape and size at the land surface. The plume grows rapidly during injection, but it increases only slightly after shut-in due to slow updip migration driven by buoyancy. The plume becomes stationary within the post-injection monitoring period. The optimal injector design balances the optimization goals of CO2 plume size, pressure increase, and pressure buildup at geological faults. The optimal injection well design is robust under uncertainties from injection schemes and geological model realizations. Rock deformation due to the pressure buildup is also computed. The model estimates 2.1 cm of uplift that occurs during the year of the peak annual injection rate. Land surface uplift strongly correlates with the subsurface pressure response.
21 April 2025 in International Journal of Greenhouse Gas Control