Nuclear data, especially fission yields, create uncertainties in the predicted concentrations of fission products in spent fuel which can exceed engineering target accuracies. Herein, we present a new framework that extends data assimilation methods to burnup simulations by using post-irradiation examination experiments. The adjusted fission yields lowered the bias and reduced the uncertainty of the simulations. Our approach adjusts the model parameters of the code GEF. We compare the BFMC and MOCABA approaches to data assimilation, focusing especially on the effects of the non-normality of GEF’s fission yields. In the application that we present, the best data assimilation framework decreased the average bias of the simulations from 26% to 14%. The average relative standard deviation decreased from 21% to 14%. The GEF fission yields after data assimilation agreed better with those in JEFF3.3. For Pu-239 thermal fission, the average relative difference from JEFF3.3 was 16% before data assimilation and after it was 12%. For the standard deviations of the fission yields, GEF’s were 100% larger than JEFF3.3’s before data assimilation and after were only 4% larger. The inconsistency of the integral data had an important effect on MOCABA, as shown with the Marginal Likelihood Optimization method. When the method was not applied, MOCABA’s adjusted fission yields worsened the bias of the simulations by 30%. BFMC showed that it inherently accounted for this inconsistency. Applying Marginal Likelihood Optimization with BFMC gave a 2% lower bias compared to not applying it, but the results were more poorly converged.
1 July 2015 in Science and Technology of Nuclear Installations
In order to analyze the steady state and transient behavior of the CROCUS reactor, several methods and models need to be developed in the areas of reactor physics, thermal-hydraulics, and multiphysics coupling. The long-term objectives of this project are to work towards the development of a modern method for the safety analysis of research reactors and to update the Final Safety Analysis Report of the CROCUS reactor. A first part of the paper deals with generation of a core simulator nuclear data library for the CROCUS reactor using the Serpent 2 Monte Carlo code and also with reactor core modeling using the PARCS code. PARCS eigenvalue, radial power distribution, and control rod reactivity worth results were benchmarked against Serpent 2 full-core model results. Using the Serpent 2 model as reference, PARCS eigenvalue predictions were within 240 pcm, radial power was within 3% in the central region of the core, and control rod reactivity worth was within 2%. A second part reviews the current methodology used for the safety analysis of the CROCUS reactor and presents the envisioned approach for the multiphysics modeling of the reactor.
The present article describes the preliminary design studies for PETALE (Programme d’Etude en Transmission de l’Acier Lourd et ses Eléments), an oncoming experimental program in the CROCUS reactor. Within the framework of the Venus-Eole-Proteus collaboration, PETALE continues the nuclear data validation efforts required for modeling GEN-III pressurized water reactors with heavy steel reflectors. The inelastic scattering cross sections at around 1 MeV of iron-56, as well as nickel and chromium isotopes, will be studied separately. The water reflector will be replaced successively by sheets of stainless steel alloy and pure metals—iron, nickel, and chromium. Data will be extracted from two sources: the measured neutron flux attenuation using adequate dosimetry and possibly fission chambers in the metal reflector and from the criticality effects of these reflectors. PETALE will also be used with nuclear data adjustment methods because, as a separated and elemental integral experiment, it allows the limiting of compensation effects in the nuclear data adjustments. A parametric study has been carried out with MCNPX for assessing the optimal configuration and the feasibility of the experiments. This study is the first step toward optimizing the global sensitivity of the experiments to the reactions in the energy range of interest, thus assessing the measurements’ target uncertainties and preparing further use of the program results.