The study examines the development and testing of algorithms for disturbance inception time estimation in a power system using instantaneous values of current and voltage with a high sampling rate. The algorithms were tested on both modeled and physical data. The error of signal extremum forecast, the error of signal form forecast, and the signal value at the so-called joint point provided the basis for the suggested algorithms. The method of tuning for each algorithm was described. The time delay and accuracy of the algorithms were evaluated with varying tuning parameters. The algorithms were tested on the two-machine model of a power system in Matlab/Simulink. Signals from emergency event recorders installed on real power facilities were used in testing procedures. The results of this study indicated a possible and promising application of the suggested methods in the emergency control of power systems.

The development of modern power systems is directly related to changes in the traditional principles of management, planning, and monitoring of electrical modes. The mass introduction of renewable energy sources and control devices based on power electronics components contributes to changing the nature of the flow of transient and quasi-established electrical modes. In this area, the problem arises of conducting a more accurate and rapid assessment of the parameters of the electrical regime using synchronized vector measurement devices. The paper presents an extensive meta-analysis of the modern applications of phasor measurement units (PMUs) for monitoring, emergency management and protection of power systems. As a result, promising research directions, the advantages and disadvantages of the existing approaches to emergency management, condition assessment, and relay protection based on PMUs are identified.

One of the tasks in the operation of electric power systems is the correct functioning of the protection system and emergency automation algorithms. Instrument voltage and current transformers, operating in accordance with the laws of electromagnetism, are most often used for information support of the protection system and emergency automation algorithms. Magnetic core saturation of the specified current transformers can occur during faults. As a result, the correct functioning of the protection system and emergency automation algorithms is compromised. The consequences of current transformers saturation are mostly reflected in the main protections of network elements operating on a differential principle. This work aims to consider the analysis of current transformer saturation detection methods. The problem of identifying current transformer saturation is reduced to binary classification, and methods for solving the problem based on artificial neural networks, support vector machine, and decision tree algorithms are proposed. Computational experiments were performed, and their results were analyzed with imbalanced (dominance of the number of current transformer saturation modes over the number of modes with its normal operation) and balanced classes 0 (no current transformer saturation) and 1 (current transformer saturation).

Nontechnical losses of electrical energy (NTLEE) have been a persistent issue in both the Russian and global electric power industries since the end of the 20th century. Every year, these losses result in tens of billions of dollars in damages. Promptly identifying unscrupulous consumers can prevent the onset of NTLEE sources, substantially reduce the amount of NTLEE and economic damages to network grids, and generally improve the economic climate. The contemporary advancements in machine learning and artificial intelligence facilitate the identification of NTLEE sources through anomaly detection in energy consumption data. This article aims to analyze the current efficacy of computational methods in locating, detecting, and identifying nontechnical losses and their origins, highlighting the application of neural network technologies. Our research indicates that nearly half of the recent studies on identifying NTLEE sources (41%) employ neural networks. The most utilized tools are convolutional networks and autoencoders, the latter being recognized for their high-speed performance. This paper discusses the main metrics and criteria for assessing the effectiveness of NTLEE identification utilized in training and testing phases. Additionally, it explores the sources of initial data, their composition, and their impact on the outcomes of various algorithms.