Atthaphon Ariyarit

Dr. Atthaphon Ariyarit

Mechanical Engineering, Suranaree University of Technology, Nakhon Ratchasima, Thailand
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 September 2017 in Engineering Optimization
Verified
Journal Article
Closed access
AAAtthaphon Ariyarit
Atthaphon Ariyarit
MSMasahiko Sugiura
Masahiko Sugiura
YTYasutada Tanabe
Yasutada Tanabe
MKMasahiro Kanazaki
Masahiro Kanazaki
A multi-fidelity optimization technique by an efficient global optimization process using a hybrid surrogate model is investigated for solving real-world design problems. The model constructs the local deviation using the kriging method and the global model using a radial basis function. The expected improvement is computed to decide additional samples that can improve the model. The approach was first investigated by solving mathematical test problems. The results were compared with optimization results from an ordinary kriging method and a co-kriging method, and the proposed method produced the best solution. The proposed method was also applied to aerodynamic design optimization of helicopter blades to obtain the maximum blade efficiency. The optimal shape obtained by the proposed method achieved performance almost equivalent to that obtained using the high-fidelity, evaluation-based single-fidelity optimization. Comparing all three methods, the proposed method required the lowest total number of high-fidelity evaluation runs to obtain a converged solution.

18 December 2017 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AAAtthaphon Ariyarit
Atthaphon Ariyarit
Masahiro KanazakiMasahiro Kanazaki
Masahiro Kanazaki
In this study, efficient global optimization (EGO) with a multi-fidelity hybrid surrogate model for multi-objective optimization is proposed to solve multi-objective real-world design problems. In the proposed approach, a design exploration is carried out assisted by surrogate models, which are constructed by adding a local deviation estimated by the kriging method and a global model approximated by a radial basis function. An expected hypervolume improvement is then computed on the basis of the model uncertainty to determine additional samples that could improve the model accuracy. In the investigation, the proposed approach is applied to two-objective and three-objective optimization test functions. Then, it is applied to aerodynamic airfoil design optimization with two objective functions, namely minimization of aerodynamic drag and maximization of airfoil thickness at the trailing edge. Finally, the proposed method is applied to aerodynamic airfoil design optimization with three objective functions, namely minimization of aerodynamic drag at cruising speed, maximization of airfoil thickness at the trialing edge and maximization of lift at low speed assuming a landing attitude. XFOILis used to investigate the low-fidelity aerodynamic force, and a Reynolds-averaged Navier–Stokes simulation is applied for high-fidelity aerodynamics in conjunction with a high-cost approach. For comparison, multi-objective optimization is carried out using a kriging model only with a high-fidelity solver (single fidelity). The design results indicate that the non-dominated solutions of the proposed method achieve greater data diversity than the optimal solutions of the kriging method. Moreover, the proposed method gives a smaller error than the kriging method.

1 April 2021 in Theoretical and Applied Fracture Mechanics
Verified
Journal Article
Closed access
AWAttasit Wiangkham
Attasit Wiangkham
AAAtthaphon Ariyarit
Atthaphon Ariyarit
PAPrasert Aengchuan
Prasert Aengchuan

28 August 2021 in Journal of Mechanical Science and Technology
Verified
Journal Article
Closed access
PDF file
TPTharathep Phiboon
Tharathep Phiboon
KKKrittin Khankwa
Krittin Khankwa
NPNutchanan Petcharat
Nutchanan Petcharat
NPNattaphon Phoksombat
Nattaphon Phoksombat
MKMasahiro Kanazaki
Masahiro Kanazaki
AAAtthaphon Ariyarit
Atthaphon Ariyarit

1 February 2022 in Theoretical and Applied Fracture Mechanics
Verified
Journal Article
Closed access
AWAttasit Wiangkham
Attasit Wiangkham
AAAtthaphon Ariyarit
Atthaphon Ariyarit
PAPrasert Aengchuan
Prasert Aengchuan

25 January 2023 in Energies
Verified
Journal Article
Open access
PDF file
CKChalita Kaewbuddee
Chalita Kaewbuddee
Somkiat MaithomklangSomkiat Maithomklang
Somkiat Maithomklang
Prasert AengchuanPrasert Aengchuan
Prasert Aengchuan
AWAttasit Wiangkham
Attasit Wiangkham
NKNiti Klinkaew
Niti Klinkaew
Ekarong SukjitEkarong Sukjit
Ekarong Sukjit
The current study aims to investigate and compare the effects of waste plastic oil blended with n-butanol on the characteristics of diesel engines and exhaust gas emissions. Waste plastic oil produced by the pyrolysis process was blended with n-butanol at 5%, 10%, and 15% by volume. Experiments were conducted on a four-stroke, four-cylinder, water-cooled, direct injection diesel engine with a variation of five engine loads, while the engine’s speed was fixed at 2500 rpm. The experimental results showed that the main hydrocarbons present in WPO were within the range of diesel fuel (C13–C18, approximately 74.39%), while its specific gravity and flash point were out of the limit prescribed by the diesel fuel specification. The addition of n-butanol to WPO was found to reduce the engine’s thermal efficiency and increase HC and CO emissions, especially when the engine operated at low-load conditions. In order to find the suitable ratio of n-butanol blends when the engine operated at the tested engine load, the optimization process was carried out by considering the engine’s load and ratio of the n-butanol blend as input factors and the engine’s performance and emissions as output factors. It was found that the multi-objective function produced by the general regression neural network (GRNN) can be modeled as the multi-objective function with high predictive performances. The coefficient of determination (R2), mean absolute percentage error (MAPE), and root mean square error (RSME) of the optimization model proposed in the study were 0.999, 2.606%, and 0.663, respectively, when brake thermal efficiency was considered, while nitrogen oxide values were 0.998, 6.915%, and 0.600, respectively. As for the results of the optimization using NSGA-II, a single optimum value may not be attained as with the other methods, but the optimization’s boundary was obtained, which was established by making a trade-off between brake thermal efficiency and nitrogen oxide emissions. According to the Pareto frontier, the engine load and ratio of the n-butanol blend that caused the trade-off between maximum brake thermal efficiency and minimum nitrogen oxides are within the approximate range of 37 N.m to 104 N.m and 9% to 14%, respectively.