Climate change and environmental sustainability are among the most prominent issues of today. It is increasingly fundamental and urgent to develop a sustainable economy, capable of change the linear paradigm, actively promoting the efficient use of resources, highlighting product, component and material reuse. Among the many approaches to circular economy and zero-waste concepts, biochar is a great example and might be a way to push the economy to neutralize carbon balance. Biochar is a solid material produced during thermochemical decomposition of biomass in an oxygen-limited environment. Several authors have used life cycle assessment (LCA) method to evaluate the environmental impact of biochar production. Based on these studies, this work intends to critically analyze the LCA of biochar production from different sources using different technologies. Although these studies reveal differences in the contexts and characteristics of production, preventing direct comparison of results, a clear trend appears. It was proven, through combining life cycle assessment and circular economy modelling, that the application of biochar is a very promising way of contributing to carbon-efficient resource circulation, mitigation of climate change, and economic sustainability.

In this work, dry carbonization (DC) and hydrothermal carbonization (HTC) of refuse-derived fuel (RDF) pellets were conducted to evaluate the physical, chemical, and fuel properties of the produced chars. In the dry carbonization tests, biomass sawdust was incorporated in different proportions on the samples to minimize agglomeration caused by the melting of the plastic fraction. The experiments were carried out in a temperature of 400 °C (DC) and 250–300 °C (HTC), in a residence time of 30 min. The respective chars and hydrochars were characterized according to their mass yield, apparent density, proximate, elemental, and mineral composition, chlorine content, high heating value, thermogravimetric profile, and surface functional groups. The results showed that the dry carbonization of RDF pellets with biomass incorporation, followed by a washing step, resulted in the production of chars with improved properties such as higher fixed carbon and higher heating value (HHV) (25–26 MJ/kg) and lower ash and chlorine content. Additionally, the HTC experiments demonstrated that hydrochars showed improved properties without the need for biomass addition and washing, however, with no significant difference in the HHV (20–21 MJ/kg). Therefore, DC of RDF pellets with 10% biomass incorporation seems to be a promising option to overcome the constraints of RDF utilization as an alternative fuel.

Due to the energy crisis that some countries are facing nowadays, the gasification process appears to be a good alternative to produce some energy from solid materials. Increasingly, gasification involves using wastes as a solid fuel, making the process green and reusing some materials that otherwise could end up in a landfill. However, the process of finding the best gasification parameters of a sample can be very expensive and time-consuming. In this sense, a refuse-derived fuel (RDF) char produced from an original RDF under 30 min at 400 °C was tested on a small-scale reactor using macro thermogravimetric analysis (TGA), as presented in this paper. The goal was to study and evaluate the devolatilization and residual carbon rate of the sample under several conditions and, at the same time, quantify and analyze the released gas. In the first round of tests, 5, 10, and 20 g of samples were tested at 750 °C with an excess of air coefficient (λ) = 0 and 0.2. It was possible to conclude that the lower the mass, the higher the devolatilization rate. The λ only had an influence on the devolatilization rate with a 20 g sample. Regarding the gas, CO, CO₂, and H₂ had no variation in the sample mass in contrast to CH₄, which increased with the increase in the sample mass. The second round of tests was performed with samples of 10 g of mass at temperatures of 700, 800, and 900 °C and λ values of 0.15, 0.2, and 0.25. The tests indicated that the temperature influenced the devolatilization rate but not the residual carbon combustion rate. Regarding the gas composition, CH₄, CO₂, and CO followed the same trend, decreasing the concentration with the increase in temperature; in contrast, H₂ increased in concentration with an increase in temperature. The heating value of the gas followed the same behavior as CH₄.

The treatment of wastewater worldwide generates substantial quantities of sewage sludge (SS), prompting concerns about its environmental impact. Various approaches have been explored for SS reuse, with energy production emerging as a viable solution. This study focuses on harnessing energy from domestic wastewater treatment (WWT) sewage sludge through plasma gasification. Effective syngas production hinges on precise equipment design which, in turn, depends on the detailed feedstock used for characterization. Key components of plasma gasification include the plasma torch, reactor, heat exchanger, scrubber, and cyclone, enabling the generation of inert slag for landfill disposal and to ensure clean syngas. Designing these components entails considerations of sludge composition, calorific power, thermal conductivity, ash diameter, and fusibility properties, among other parameters. Accordingly, this work entails the development of an experimental setup for the plasma gasification of sewage sludge, taking into account a comprehensive sludge characterization. The experimental findings reveal that domestic WWT sewage sludge with 40% humidity exhibits a low thermal conductivity of approximately 0.392 W/mK and a calorific value of LHV = 20.78 MJ/kg. Also, the relatively low ash content (17%) renders this raw material advantageous for plasma gasification processes. The integration of a detailed sludge characterization into the equipment design lays the foundation for efficient syngas production. This study aims to contribute to advancing sustainable waste-to-energy technologies, namely plasma gasification, by leveraging sewage sludge as a valuable resource for syngas production.

In this work, dry and hydrothermal carbonization (DC and HTC) of RDF pellets were conducted to evaluate the physical, chemical, and fuel properties of the produced chars. In the dry carbonization tests, biomass sawdust was incorporated in different proportions on the samples to minimize agglomeration caused by the melting of the plastic fraction. The experiments were carried out in a temperature of 400°C (DC) and 250-300°C (HTC), in a residence time of 30 minutes. The respective chars and hydrochars were characterized according to their mass yield, apparent density, proximate, elemental, and mineral composition, chlorine content, high heating value, thermogravimetric profile, and surface functional groups. The results showed that dry carbonization of RDF pellets with biomass incorporation, followed by a washing step, resulted in the production of chars with improved properties such as higher fixed carbon and HHV (25-26 MJ/kg) and lower ash and chlorine content. Additionally, the HTC experiments demonstrated that hydrochars showed improved properties without the need for biomass addition and washing, however, with no significant difference in the HHV (20-21 MJ/kg). Therefore, DC of RDF pellets with 10% biomass incorporation seems to be a promising option to overcome the constraints of RDF utilization as an alternative fuel.