Small- and Medium-sized Enterprises (SMEs) support the steady, sustainable economic growth and assist the development of China's market economy. This paper discusses the financing of the SMEs in China, the related problems and the possible solutions.
In this study, dynamic triaxial cyclic tests were conducted to examine the liquefaction properties and post‐liquefaction volumetric strain of calcareous sand from a dredger fill site in the midst of the islands and reefs of the South China Sea. The test results indicated that there were some differences in micromorphology and composition between the calcareous sand obtained via dredging and natural calcareous sand. Axial cyclic stress attenuation can lead to higher cyclic vibration than actual liquefaction vibration, and the modified method can eliminate the effect of axial cyclic stress attenuation. Saturated calcareous sand liquefies under undrained and cyclic loading conditions, and the liquefaction resistance of the calcareous sand decreases with an increase of the effective confining pressure in the dense state. Calcareous sand obtained via dredging exhibited a higher liquefaction resistance compared with other types of calcareous sand. Furthermore, the proposed pore pressure development modified model better describes the pore pressure growth of the calcareous sand from the filling site. The fitting parameters of this model exhibited a high correlation with the relative density. Moreover, the post‐liquefaction volumetric strain of the calcareous sand is larger than that of quartz sand, exhibiting a linear relationship with relative density.
1 January 2024 in Latin American Journal of Solids and Structures
For the design of scaled model and similarity prediction of vibration of 300,000m3 blast furnace gasholder body, based on energy method and discrete stiffening theory, the scaling principle relation of gasholder body free vibration are derived. By using the thickness scale factor of the gasholder body skin and rib is distorted, and utilizing the stiffness equivalence, respectively, gasholder body scaled models (stiffened rib equivalent to rectangle) with geometric distortion and with both geometric and material distortion are designed and fabricated respectively. The free vibration of distortion similarity prediction of gasholder body prototype is carried out by the method of simulation and test. Results show that both two kinds of gasholder body scaled models, can predict the prototype frequency more accurately by using the similarity coefficient calculated by the average bending stiffness of column, ring rib, and wind-resistant ring. The proposed design method and scaling principle relation for gasholder body scaled model with free vibration and distortion are suitable for the design of scaled model distortion and similar prediction of free vibration of longitudinal ring-stiffened large thin-walled cylindrical shells with T-shaped and I-shaped stiffeners.
24 August 2024 in International Journal of Structural Stability and Dynamics