Nanocrystalline cellulose is an abundant and inexhaustible organic material on Earth. It can be derived from many lignocellulosic plants and also from agricultural residues. They endowed exceptional physicochemical properties, which have promoted their intensive exploration in biomedical application, especially for tissue engineering scaffolds. Nanocrystalline cellulose has been acknowledged due to its low toxicity and low ecotoxicological risks towards living cells. To explore this field, this review provides an overview of nanocrystalline cellulose in designing materials of bone scaffolds. An introduction to nanocrystalline cellulose and its isolation method of acid hydrolysis are discussed following by the application of nanocrystalline cellulose in bone tissue engineering scaffolds. This review also provides comprehensive knowledge and highlights the contribution of nanocrystalline cellulose in terms of mechanical properties, biocompatibility and biodegradability of bone tissue engineering scaffolds. Lastly, the challenges for future scaffold development using nanocrystalline cellulose are also included.

Green Lean Six Sigma has emerged in the Industry 4.0 era as a business strategy contributing to the circular economy by adopting the 3R concept, i.e., reduce, reuse, and recycle. Despite its broadly acknowledged capabilities in the manufacturing industry, practitioners continue to be cautious about its implementation, owing to insufficient knowledge and culture. Hence, there is a need to systematize the existing knowledge regarding this green initiative and also to recognize the key factors enabling its implementation. In the Malaysian manufacturing context, the enabling factors have yet to be identified and evaluated. This current study is the first of its kind to identify and examine these factors and to create a structural model to conceptualize and operationalize this business strategy. The implemented methodological approach includes two steps. Firstly, it performs a systematic review of leading studies on the topic, which are rather scarce in the current context. The second step entails a principal component factor analysis using varimax rotation to finalize the findings. The theoretical and empirical results revealed a structural model with five interconnected key factors, including twenty-seven enablers, that can be used to narrow the existing knowledge gap in the understudied context.

The current developments in three-dimensional printing also referred as “additive manufacturing” have transformed the scenarios for modern manufacturing and engineering design processes which show greatest advantages for the fabrication of complex structures such as scaffold for tissue engineering. This review aims to introduce additive manufacturing techniques in tissue engineering, types of biomaterials used in scaffold fabrication, as well as in vitro and in vivo evaluations. Biomaterials and fabrication methods could critically affect the outcomes of scaffold mechanical properties, design architectures, and cell proliferations. In addition, an ideal scaffold aids the efficiency of cell proliferation and allows the movements of cell nutrient inside the human body with their specific material properties. This article provides comprehensive review that covers broad range of all the biomaterial types using various additive manufacturing technologies. The data were extracted from 2008 to 2018 mostly from Google Scholar, ScienceDirect, and Scopus using keywords such as “Additive Manufacturing,” “3D Printing,” “Tissue Engineering,” “Biomaterial” and “Scaffold.” A 10 years research in this area was found to be mostly focused toward obtaining an ideal scaffold by investigating the fabrication strategies, biomaterials compatibility, scaffold design effectiveness through computer-aided design modeling, and optimum printing machine parameters identification. As a conclusion, this ideal scaffold fabrication can be obtained with the combination of different materials that could enhance the material properties which performed well in optimum additive manufacturing condition. Yet, there are still many challenges from the printing methods, bioprinting and cell culturing that needs to be discovered and investigated in the future.

The design of a scaffold of bone tissue engineering plays an important role in ensuring cell viability and cell growth. Therefore, it is a necessity to produce an ideal scaffold by predicting and simulating the properties of the scaffold. Hence, the computational method should be adopted since it has a huge potential to be used in the implementation of the scaffold of bone tissue engineering. To explore the field of computational method in the area of bone tissue engineering, this paper provides an overview of the usage of a computational method in designing a unit cell of bone tissue engineering scaffold. In order to design a unit cell of the scaffold, we discussed two categories of unit cells that can be used to design a feasible scaffold, which are non-parametric and parametric designs. These designs were later described and being categorised into multiple types according to their characteristics, such as circular structures and Triply Periodic Minimal Surface (TPMS) structures. The advantages and disadvantages of these designs were discussed. Moreover, this paper also represents some software that was used in simulating and designing the bone tissue scaffold. The challenges and future work recommendations had also been included in this paper.

Acid corrosion is a problem pertaining to corrosion that involves an acid solution. It is important to treat metal to preserve its integrity. Thus, acids are utilized to clean and treat metal surfaces. In return, this may lead to over-etching and metal degradation. Corrosion inhibitors were introduced as a solution for the issue. However, there are some problems associated with the usage of conventional corrosion inhibitors. Traces of nitrites and chromates that are present in the inhibitors may lead to serious health and environmental issues. As a solution, organic green corrosion inhibitors have been studied to replace the conventional corrosion inhibitors. These inhibitor molecules form a protective layer on top of the metal surface to suppress metal dissolution when added to the acid solution. This process prevents direct contact between the metal surfaces and the acid environment. This study explores the usage of natural resources and biomass wastes as the basis for organic green corrosion inhibitors. This study also provides some suggestions for new biomass wastes that can be studied as new organic corrosion inhibitors, and it is aimed at opening the perspective of researchers on exploring new organic inhibitors by using natural resources and biomass wastes.

The selection of a scaffold-fabrication method becomes challenging due to the variety in manufacturing methods, biomaterials and technical requirements. The design and development of tissue engineering scaffolds depend upon the porosity, which provides interconnected pores, suitable mechanical strength, and the internal scaffold architecture. The technology of the additive manufacturing (AM) method via photo-polymerization 3D printing is reported to have the capability to fabricate high resolution and finely controlled dimensions of a scaffold. This technology is also easy to operate, low cost and enables fast printing, compared to traditional methods and other additive manufacturing techniques. This article aims to review the potential of the photo-polymerization 3D-printing technique in the fabrication of tissue engineering scaffolds. This review paper also highlights the comprehensive comparative study between photo-polymerization 3D printing with other scaffold fabrication techniques. Various parameter settings that influence mechanical properties, biocompatibility and porosity behavior are also discussed in detail.