Wood and aluminum composites are becoming increasingly attractive due to their ability to combine the advantages of both materials: the lightweight nature of wood and the strength of aluminum. However, using conventional wood adhesives like polyvinyl acetate (PVAc) to bond these dissimilar materials is challenging and requires special surface treatments. Prior studies have demonstrated that applying a dielectric barrier discharge plasma treatment significantly enhances shear and bending strengths in beech wood/aluminum bonds. This study focuses on the molecular interactions between PVAc and aluminum or beech wood influenced by plasma surface modification. Surface-sensitive methods, including X-ray photoelectron spectroscopy, infrared reflection adsorption spectroscopy and atomic force microscopy, were employed to characterize the PVAc films on the corresponding surfaces and to identify possible interactions. The ultrathin PVAc films required for this purpose were deposited by spin coating on untreated and plasma-treated aluminum. The aluminum surface was cleaned and oxidized by plasma. Additionally, hydroxyl species could be detected on the surface. This can lead to the formation of hydrogen bonds between the aluminum and the carbonyl oxygen of PVAc after plasma treatment, presumably resulting in increased bond strength. Furthermore, the beech wood surface is activated with polar oxygen species.
1 September 2025 in Journal of Physics D: Applied Physics
This study explores the application of a dielectric barrier discharge (DBD) plasma jet in an Ar/H2 gas flow for oxide reduction and shielding on E235 steel surfaces. We detail the construction of the non-thermal plasma jet system, including the operational parameters and characterization of reactive species present in the plasma phase using optical emission spectroscopy. Notably, the presence of atomic hydrogen species in the plasma highlights the oxide-reducing capability of this method. Subsequently, analytical techniques such as optical microscopy, field-emission scanning electron microscopy, and energy-dispersive x-ray spectroscopy were employed to evaluate the treatment’s effectiveness. The application of the Ar/H2 plasma jet at 25 °C produced partial deoxidation and cleaning effects on the steel surface, indicating its potential under these conditions. Furthermore, we assessed the plasma jet’s efficiency during rapid thermal processing of steel, where the surface temperature reached approximately 1000 °C within 1 s—a condition relevant to high-temperature metal-joining applications. Our findings revealed that the center of the area directly interacting with the plasma jet was largely protected from oxidation, exhibiting an oxygen concentration of 7 at.% compared to 53 at.% on the untreated surface. The metallic appearance of this central interaction zone was largely preserved, and it measured approximately 2.5 mm2. In contrast, processing with a non-ionized Ar/H2 gas under identical conditions produced a smaller central area of 0.7 mm2 with a higher oxygen concentration of 19 at.%. Importantly, both treatments were conducted using the same setup, ensuring that observed differences resulted from the presence of the plasma jet. These results suggest that the DBD plasma jet process offers improved shielding and oxide reduction over a larger surface area than a non-ionized gas flow. Therefore, this study highlights the potential of Ar/H2 non-thermal plasma jet treatment for enhancing steel surface quality in metal-joining applications.
This handbook is a comprehensive guide to creating and maintaining oxygen‐free environments for processing oxygen‐sensitive materials. Oxygen‐free conditions are defined as having a sufficiently low oxygen partial pressure (<10 −10 ppm) to prevent significant surface oxidation during typical processing times. Conventional methods such as extreme high vacuum are technically challenging and expensive. Introducing silane into inert gas atmospheres provides a scalable and efficient alternative. Silane reacts rapidly with residual oxygen to form silicon dioxide and hydrogen, enabling stable, oxygen‐free environments at room temperature and atmospheric pressure. The handbook outlines practical methods for achieving oxygen‐free conditions using glove boxes, gas purification systems, and controlled gas mixtures. It provides detailed descriptions of system design, purging strategies, monitoring techniques, and sensor integration for oxygen, water, hydrogen, and silane concentration monitoring. It also covers operational aspects, dust management, and experimental setup. By combining theoretical observations with technical implementation guidelines, this resource enables researchers to reliably produce oxygen‐free conditions for a wide range of applications.
23 February 2026 in Advanced Engineering Materials
This work addresses a central challenge in Al–Cu compound casting: native copper oxides, which inhibit wetting and metallurgical bonding. A laser‐based deoxidation strategy (ns‐pulsed, 1064 nm) performed under oxygen‐free, XHV‐equivalent glovebox conditions, and quantifying subsequent oxide regrowth during realistic short‐term handling, is demonstrated. Surface roughness was tuned via pulse/line overlap (0% vs. 70%) and characterized using confocal microscopy and power spectral density analysis. X‐ray photoelectron spectroscopy reveals that laser processing under XHV‐equivalent conditions produces copper surfaces that are more than 98% oxide‐free and remain predominantly metallic for at least 720 h, whereas exposure to ambient air rapidly leads to the formation of a Cu 2 O/Cu(OH) 2 surface layer within 24 h. Subsequent post‐treatment heating promotes the transformation CuO CuO, in accordance with established low‐temperature oxidation pathways. Casting under XHV‐equivalent conditions yields fully bonded Al–Cu interfaces with the expected Al 2 Cu, AlCu, and Al 4 Cu 9 intermetallic layers. Intermetallic compound (IMC) morphology is more strongly governed by processing parameters (temperature, expected melt‐to‐solid ratio, and thermal history) than by minor short‐term oxide regrowth. Overall, laser deoxidation under XHV‐equivalent conditions emerges as a pretreatment that improves wetting, enables controllable IMC formation, and preserves high interfacial thermal conductivity in Al–Cu composite castings.
23 February 2026 in Advanced Engineering Materials
Cold roll bonding (CRB), a process that conventionally requires high degrees of deformation, is employed under extreme high vacuum (XHV)‐adequate conditions to promote bond formation. Specifically, surface pretreatments via laser ablation and mechanical brushing are compared for CuAl bonding in oxygen‐free environments with a focus on bond strength evolution, interface morphology, residual stress states and crystallographic texture development. Laser ablation treatment led to superior bond strengths at all tested reduction levels, while both methods converged to similar strength values at high deformation levels. Laser ablation creates interfaces with increased true contact area through enhanced microscopic irregularities. Residual stress measurements show that laser ablation induces beneficial residual tensile stresses, whereas brushing generates residual compressive stresses. In addition, laser‐treated specimens retain preferred cube textures at the surfaces for both bonding partners, reducing crystallographic mismatch. The enhanced performance of laser ablation arises from synergistic mechanisms, as detailed in a multimechanistic framework to foster understanding of CRB under oxygen‐free conditions.