Three-dimensional (3D) printing with earth-based mortar is still under development and faces challenges. Optimising the mortar mixture, improving structural strength, determining the relationship between the printing speed and the amount of extruded material, and ensuring long-term durability are areas that are being refined. Additionally, regulatory and certification issues must also be considered to ensure the safety and compliance of 3D printed structures. This paper presents for discussion the records, analyses, studies, and considerations regarding initial initiatives involving 3D printing with the extrusion of earth-based mortar developed at the Faculty of Engineering of the University of Porto (FEUP). Through this work, it was possible to strengthen and reaffirm that 3D printing with earth-based mortar has significant potential in the construction industry and that the incorporation of dispersed kraft paper fibres from the recycling of cement bags is an excellent resource to achieve good constructability in 3D printing with earth-based mortar.
3D printing with earth-based mortar is still under development and faces challenges. Optimizing the mortar mixture, improving structural strength, determining the relationship between printing speed and the amount of extruded material, and ensuring long-term durability are areas that are still being refined. Additionally, regulatory and certification issues must also be considered to ensure the safety and compliance of 3D printed structures. This paper presents for discussion the records, analyses, studies, and considerations regarding the initial initiatives involving 3D printing with the extrusion of earth-based mortar developed at the Faculty of Engineering of the University of Porto - FEUP. Through this work, it is possible to strengthen and reaffirm that 3D printing with earth-based mortar has significant potential in the construction industry and that the incorporation of dispersed kraft paper fibres from the recycling of cement bags is an excellent resource to achieve good constructability in 3D printing with earth-based mortar.
3 January 2022 in Latin American Journal of Development
Este trabalho apresenta a descrição do projeto arquitetônico-construtivo desenvolvido no Escritório Modelo da Faculdade de Arquitetura e Urbanismo da Universidade de Brasília para uma habitação de interesse social em Luanda, Angola. Este projeto foi apresentado no concurso de idéias A HOUSE IN LUANDA: PATIO AND PAVILION, organizado pela Trienal de Arquitectura de Lisboa de 2010. Utilizou-se a arquitetura de terra associada a componentes construtivos pré-fabricados de ferrocimento para produzir mais uma alternativa para habitações de baixo custo, de qualidade e duráveis. Foram exploradas as boas características dos BTCs modulados vazados e com encaixes em associação com componentes de ferrocimento pré-fabricados, como: pré-forma para lajes nervuradas, telhas, reservatórios de água, escadas, bancadas, pias e sanitários compostáveis. São apresentadas as diretrizes de projeto, os sistemas construtivos adotados e o partido arquitetônico do módulo inicial e das possíveis expansões, bem como o estudo do tecido urbano resultado da replicação das várias possibilidades de implantação.
28 May 2020 in Paranoá: cadernos de arquitetura e urbanismo
Esse trabalho pressupõe que uma parcela dos acidentes de trânsito ocorridos em Brasília poderia ter sido evitada ou ter significativa diminuição dos níveis de severidade caso as vias de Brasília realmente tivessem sido projetadas, construídas e mantidas conforme as normas e padrões de segurança no trânsito. O objetivo do estudo foi o de identificar e mapear os pontos de risco alto nas áreas adjacentes das principais vias do Plano Piloto de Brasília. Foram identificados, classificados e mapeados um total de 2058 (dois mil e cinquenta e oito) pontos de risco alto. A partir desse levantamento foi possível apresentar ações para a redução da acidentalidade e dos níveis de severidade dos acidentes nas vias de Brasília.