Arresting gear systems play a vital role in carrier-based aircraft landing. In order to accurately understand the process of arresting hook and cable, this study introduces a parameter inversion method to model the arresting cable and applies it to the transient dynamics model of the arresting hook and cable. The feasibility of the arresting cable model and its application to the transient dynamics model of the arresting hook and cable are validated through arresting hook and cable impact tests. The study compares three different models of arresting cables for simulation results and concludes that assuming the arresting cable to be a beam with metal elastic parameters during the modeling process cannot ignore the influence of the cable’s torsional and bending stiffness on the modeling. The study also investigates the dynamic response of the arresting hook during the aircraft arrestment and hooking process and concludes that the stress peak of the hook arm is much lower throughout the entire arrestment process than at the moment of hooking the cable. The study further identifies factors that affect the stress on the arresting hook arm, such as the aircraft’s yaw angle, deck angle, cruising speed, and the initial position of the arresting hook and cable before engagement. The research results have significant implications for improving the design optimization of the structural strength of the functional components of the naval aircraft arresting system and provide theoretical guidance and technical reserves for subsequent related studies.
1 February 1998 in Japanese Journal of Applied Physics
The initial dielectric ageing behaviors of a doped Pb[Mg1/3Nb2/3]O3-based ceramic were investigated over a wide temperature range. The dielectric constant and logarithmic ageing time were regressed in terms of a linear relationship and the temperature dependence of ageing rate at different frequencies was obtained. The strongest ageing at a particular measurement frequency is confirmed to take place at the temperature of maximum dielectric constant of the deaged ceramic at that frequency. When the ageing temperature differs from this temperature, the ageing rate decreases. The curve of ageing rate against temperature, which is found to be symmetrical in shape, is fitted by a Gaussian equation. Microstructural factors responsible for the phenomenon are analysed.
Carrier-based aircraft arresting hooks are subjected to repeated high-strain-rate impacts during arrested landings, leading to impact-induced fatigue that governs their service life and structural safety. To quantitatively evaluate this phenomenon, this study proposes a comprehensive experimental–numerical framework integrating collision–rebound testing, finite element dynamic simulation, and continuum damage mechanics (CDM)-based fatigue modeling. Repeated impact experiments were performed on a custom-built test platform to capture the transient strain evolution of critical regions in the hook head. A validated finite element (FE) model incorporating the VDISP subroutine was then developed to reproduce cyclic impact sequences under realistic boundary conditions. Using the simulated strain histories, a CDM-based fatigue life prediction model for 30CrMnSiNi2A high-strength steel was formulated and calibrated. Comparative analyses showed excellent agreement between experimental and numerical results, with strain and impact-force deviations within 6.6%. The proposed approach not only bridges the gap between physical testing and virtual prediction but also provides a generalized methodology for evaluating rate-dependent fatigue degradation, enabling predictive design and life assessment of carrier-based arresting systems.
(1-X)BaTiO3-XCaCu2.94Mn0.06Ti4O12 (BTO-CCMTO) composite ceramics with X =0.1 and 0.2 were prepared through solid state reaction route. X-ray diffraction (XRD) analyses showed that a co-existence structure of BTO and CCMTO phase can be realized when the sample was sintered at 950°C. Furthermore, influences of CCMTO on the dielectric behaviors of the BTO-CCMTO composite ceramics were investigated. The results showed that the dielectric permittivity of the BTO-CCMTO composite ceramics increases with increasing amounts of CCMTO and the Curie peak of the pure BTO ceramics is greatly suppressed due to the addition of CCMTO. The dielectric loss of the BTO-CCMTO composite ceramics can be kept in the same magnitude order as that of the BTO ceramics.