The UAV cluster combat puts forward higher requirements for short-distance arresting gears for multitype aircraft. Based on magnetorheological technology, an arresting gear was designed, and the structural parameters of the MR damper were optimized. An iterative optimization method of structural parameters via a genetic algorithm combined with parametric modeling and magnetic field simulation was proposed. The optimization method was applied to optimize the structure of both a single-coil and double-coil damper. The performance of the optimized arresting gear was studied. The results show that, under the same zero field damping upper limit, the variation range of the damping force of the double coil increases by 10.2% compared with that of the single coil. Comparing the peak overload of UAV before and after the optimization, when the UAV mass increases from 4000 kg to 10,000 kg, the reduction in the peak acceleration is increased from 19.8% to 25.4%. Compared with traditional hydraulic arresting gear, the new arresting gear has good adaptability to UAVs with various qualities and has higher arresting efficiency. This arresting gear has a certain advanced nature.
Arresting gear systems play a vital role in carrier-based aircraft landing. In order to accurately understand the process of arresting hook and cable, this study introduces a parameter inversion method to model the arresting cable and applies it to the transient dynamics model of the arresting hook and cable. The feasibility of the arresting cable model and its application to the transient dynamics model of the arresting hook and cable are validated through arresting hook and cable impact tests. The study compares three different models of arresting cables for simulation results and concludes that assuming the arresting cable to be a beam with metal elastic parameters during the modeling process cannot ignore the influence of the cable’s torsional and bending stiffness on the modeling. The study also investigates the dynamic response of the arresting hook during the aircraft arrestment and hooking process and concludes that the stress peak of the hook arm is much lower throughout the entire arrestment process than at the moment of hooking the cable. The study further identifies factors that affect the stress on the arresting hook arm, such as the aircraft’s yaw angle, deck angle, cruising speed, and the initial position of the arresting hook and cable before engagement. The research results have significant implications for improving the design optimization of the structural strength of the functional components of the naval aircraft arresting system and provide theoretical guidance and technical reserves for subsequent related studies.
Cooperative landing of multiple unmanned aerial vehicles (UAVs) requires paths that avoid threats, keep safe separations, remain flyable, and allow the swarm to reach its initial approach points at a common time. This paper proposes a multi-strategy improved grey wolf optimizer (GWO), termed MSGWO, for this three-dimensional path planning problem. A multi-population mechanism groups wolves with similar path characteristics and lets each group follow its own leaders, the nonlinear control parameter of the modified GWO (mGWO) is adopted, and the individual memory of particle swarm optimization (PSO) retains the best position found by each wolf. An explicit constrained joint model uses Deb’s feasibility rules and dense verification. Across six static-threat scenarios with 30 runs each, MSGWO achieves 73.3% feasibility versus 0–55.6% for six comparators, significantly higher after Holm correction, and the best overall Friedman rank. Mutually feasible objective values are significantly lower than GWO, mGWO, and success-history-based adaptive differential evolution with linear population size reduction (L-SHADE) overall, although L-SHADE is better in one scenario. Independent planning and an adapted disturbance-based modified GWO (DMGWO) find no jointly feasible solution in this setting. An ablation study shows that the multi-population mechanism contributes most.