The accurate calibration of large-scale switch networks is critical for integrated photonics, in which the integrated optical true time delay chip is typical. In this work, a novel self-calibration method without extra testing ports is proposed by introducing lossless thermo-optic phase shifters instead to calibrate the network. As a demonstration, a 5-bit delay line based on silicon nitride is fabricated and calibrated. The extinction ratio of all the switches is greater than 30.9 dB at the cross and bar states. Using this method, the 5-bit optical delay line which can be tuned in a range of 118.53 ps and reach a low delay time deviation less than +/- 0.4 ps.(c) 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement
Thermo-optic (TO) switches are essential components in integrated photonic circuits (PICs), but their efficiency is limited by significant heat dissipation into the silicon substrate due to its high thermal conductivity. This study presents an energy-efficient TO switching solution based on 3D glass-based EIC–PIC packaging. By leveraging the low thermal conductivity of a glass interposer, the heater efficiency is significantly enhanced. Finite element simulations show that the hybrid-bonded PIC achieves a 3.43 times improvement in heater efficiency compared to conventional surface-mounted PICs, reaching 947.7 pm/mW. For a switch array with a through-glass via pitch of 100 μm, the normalized thermal crosstalk remains below 6% . The out-of-plane warpage is less than 1 μm for a 5 mm × 5 mm PIC. This 3D integration strategy provides a scalable and energy-efficient platform for high-density photonic switching, addressing key challenges in large-scale optical systems.
We present a high-efficiency silicon grating coupler design based on a left–right mirror-symmetric grating and a metal mirror. The coupler achieves nearly perfect 90-degree vertical coupling. When two SOI chips are placed face to face with a vertical working distance of 50 μm, the chip-to-chip interlayer coupling efficiency reaches as high as 96%. When the vertical working distance ranges from 45 μm to 55 μm, the coupling loss remains below 1 dB. We also verified the effectiveness of our designed vertical coupler through 3D FDTD full-model simulation. The results demonstrate that our proposed vertical coupling structure represents a high-efficiency solution for 3D optical interconnects. The integration of multiple photonic chips in a 3D package with vertical optical and electrical interconnects is also feasible in the foreseeable future.
Thermo-optic switches are crucial elements in photonic integrated circuits (PICs), yet their efficiency is often limited by heat dissipation through the high-conductivity silicon substrate. This work presents a 3D glass–silicon hybrid bonding approach to enable energy-efficient thermo-optic switching. Finite element simulations show that integrating a glass interposer can increase power efficiency by a factor of up to 4.4 compared with conventional surface-mounted PICs, reducing the switching power to as low as 0.75 mW/${{\boldsymbol{\pi}} }$ . The hybrid bonding process has been experimentally validated, confirming reliable integration and compatibility with standard fabrication flows. This 3D packaging strategy offers a scalable, ultra–low-power solution for high-density PICs, providing a promising path toward large-scale, energy-efficient photonic switching systems.