A patterned look into a mysterious phase: A thin superconducting film can become insulating by, for example, exposure to a sufficiently large magnetic field. In between the superconducting and insulating regimes, an intermediate metallic state has been observed whose nature remains unresolved. To study the superconductor–metal insulator transition, C. Yang et al. patterned a film of the high-temperature superconductor yttrium barium copper oxide (YBCO) into a network of triangular superconducting islands connected by bridges (see the Perspective by Phillips). The reactive ion-etching process used for patterning reduced the quality of the film in a controlled manner. By increasing the etching time, the film's transport properties could be tuned from superconducting, through metallic, to insulating. The metallic phase exhibited a bosonic character. Science , this issue p. 1505 ; see also p. 1450

Neither of the two typical two-dimensional materials, graphene and single layer MoS ${}_2$ , are good enough for developing semiconductor logical devices. We calculated the electron mobility of 14 two-dimensional semiconductors with composition of MX ${}_2$ , where M (=Mo, W, Sn, Hf, Zr and Pt) are transition metals, and Xs are S, Se and Te. We approximated the electron phonon scattering matrix by deformation potentials, within which long wave longitudinal acoustical and optical phonon scatterings were included. Piezoelectric scattering in the compounds without inversion symmetry is also taken into account. We found that out of the 14 compounds, WS ${}_2$ , PtS ${}_2$ and PtSe ${}_2$ are promising for logical devices regarding the possible high electron mobility and finite band gap. Especially, the phonon limited electron mobility in PtSe ${}_2$ reaches about 4000 cm ${}^2$ ·V ${}^{-1}$ ·s ${}^{-1}$ at room temperature, which is the highest among the compounds with an indirect bandgap of about 1.25 eV under the local density approximation. Our results can be the first guide for experiments to synthesize better two-dimensional materials for future semiconductor devices.

We report in this paper on the study of surface acoustic wave (SAW) resonators based on an AlN/titanium alloy (TC4) structure. The AlN/TC4 structure with different thicknesses of AlN films was simulated, and the acoustic propagating modes were discussed. Based on the simulation results, interdigital transducers with a periodic length of 24 μm were patterned by lift-off photolithography techniques on the AlN films/TC4 structure, while the AlN film thickness was in the range 1.5–3.5 μm. The device performances in terms of quality factor (Q-factor) and electromechanical coupling coefficient (k²) were determined from the measure S₁₁ parameters. The Q-factor and k² were strongly dependent not only on the normalized AlN film thickness but also on the full-width at half-maximum (FWHM) of AlN (002) peak. The dispersion curve of the SAW phase velocity was analyzed, and the experimental results showed a good agreement with simulations. The temperature behaviors of the devices were also presented and discussed. The prepared SAW resonators based on AlN/TC4 structure have potential applications in integrated micromechanical sensing systems.

The Growing demands for humidity detection in commercial and industrial applications led to the rapid development of humidity sensors based on different techniques. Surface acoustic wave (SAW) technology is one of these methods that has been found to provide a powerful platform for humidity sensing owing to its intrinsic features, including small size, high sensitivity, and simple operational mechanism. Similar to other techniques, the principle of humidity sensing in SAW devices is also realized by an overlaid sensitive film, which serves as the core element whose interaction with water molecules is responsible for overall performance. Therefore, most researchers are focused on exploring different sensing materials to achieve optimum performance characteristics. This article reviews sensing materials used to develop SAW humidity sensors and their responses based on theoretical aspects and experimental outcomes. Herein the influence of overlaid sensing film on the performance parameters of the SAW device, such as quality factor, signal amplitude, insertion loss, etc., is also highlighted. Lastly, a recommendation to minimize the significant change in device characteristics is presented, which we believe will be a good step for the future development of SAW humidity sensors.

CuO nanocrystals with as-designed morphologies such as uniform quasi-spherical nanoparticles and high-purity nanoleaves were synthesized by adjusting the addition of sodium hydroxide and hydrazine hydrate in aqueous solution at room temperature (25 °C). The increase of sodium hydroxide would accelerate the reaction rate and favor the nucleation of CuO nanocrystals. The decrease of the surface energy will promote the oriented attachment of nanocrystallites along the [−111] direction into nanowires and the final formation of two dimensional (2D) nanoleaves. Increasing the quantity of hydrazine hydrate could decrease the solution system energy and promote the aggregation of CuO nanocrystals from 2D nanoleaves into 3D quasi-spherical nanoparticles. All the CuO nanocrystals with different morphologies were characterized via transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD). The CuO nanoleaves exhibit excellent gas sensing performance in response to ethanol, showing the strongest response value of 8.22 at 1500 ppm ethanol for ∼260 °C.