Tadele Hunde Wondimu

Tadele Hunde Wondimu

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 April 2025 in DeCarbon
Verified
Journal Article
Open access
TWTadele Hunde Wondimu
Tadele Hunde Wondimu
ZYZuo Yong
Zuo Yong
ASAkeel A. Shah
Akeel A. Shah
PLPuiki Leung
Puiki Leung
Yilkal DessieYilkal Dessie
Yilkal Dessie
QLQiang Liao
Qiang Liao

25 April 2023 in Journal of Nanomaterials
Verified
Journal Article
Open access
PDF file
EDErmias Tafa Debele
Ermias Tafa Debele
TDTemesgen Debelo Desissa
Temesgen Debelo Desissa
Osman Ahmed ZelekewOsman Ahmed Zelekew
Osman Ahmed Zelekew
FBFetene Fufa Bakare
Fetene Fufa Bakare
GFGebisa Bekele Feyisa
Gebisa Bekele Feyisa
TWTadele Hunde Wondimu
Tadele Hunde Wondimu
Cu1–xNixO/Fe2O3 (with x0.01, 0.02, 0.03, 0.04wt) were synthesized by plant extraction technique. The absorbance and degradation performance of Ni-doped CuO and Fe2O3 nanocomposite against methylene blue (MB) was analyzed, and the 2 Ni-doped CuO yielded an optimum result, and the optical bandgap of CuO, 2NCO, Fe2O3, and (60) 2NCO/40 Fe2O3 was found to be 1.88, 1.73, 2.1, and 1.80eV, respectively. Hence, the 2 Ni-doped CuO (2NCO) was further used for the establishment of a composite with Fe2O3. The lowest composition of the oxide composite was (1x) 2NCO/(x) Fe2O3 (x0.1, 0.2, 0.3, 0.4, and 0.5). The degradation performance of those oxide composites was determined against (MB) with the nominal composition of sample (60) 2NCO/40 Fe2O3 resulted in an optimum degradation of MB with a percentage of 94 at 120min. The recyclability takes a look at was performed for five cycles at the start of 94; after five cycles, the sample remained stable at 120min. Therefore, 2NCO/40 Fe2O3 composite is going to be the selection material for waste product treatment.

5 June 2023 in Bioinorganic Chemistry and Applications
Verified
Journal Article
Open access
PDF file
MMMintesinot Tamiru Mengistu
Mintesinot Tamiru Mengistu
TWTadele Hunde Wondimu
Tadele Hunde Wondimu
DADinsefa Andoshe
Dinsefa Andoshe
Jung Yong KimJung Yong Kim
Jung Yong Kim
Osman Ahmed ZelekewOsman Ahmed Zelekew
Osman Ahmed Zelekew
Ho Won JangHo Won Jang
Ho Won Jang
A simple wet chemical ultrasonic-assisted synthesis method was employed to prepare visible light-driven g-C3N4-ZnO-Co3O4 (GZC) heterojunction photocatalysts. X-ray diffraction (XRD), scanning electromicroscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), BrunauerEmmettTeller (BET), ultraviolet (UV), and electrochemical impedance spectroscopy (EIS) are used to characterize the prepared catalysts. XRD confirms the homogenous phase formation of g-C3N4, ZnO, and Co3O4, and the heterogeneous phase for the composites. The synthesized ZnO and Co3O4 by using cellulose as a template show a rod-like morphology. The specific surface area of the catalytic samples increases due to the cellulose template. The measurements of the energy band gap of a g-C3N4-ZnO-Co3O4 composite showed red-shifted optical absorption to the visible range. The photoluminescence (PL) intensity decreases due to the formation of heterojunction. The PL quenching and EIS result shows that the reduction of the recombination rate and interfacial resistance result in charge carrier kinetic improvement in the catalyst. The photocatalytic performance in the degradation of MB dye of the GZC-3 composite was about 8.2-, 3.3-, and 2.5-fold more than that of the g-C3N4, g-C3N4-ZnO, and g-C3N4-Co3O4 samples. The MottSchottky plots of the flat band edge position of g-C3N4, ZnO, Co3O4, and Z-scheme g-C3N4-ZnO-Co3O4 photocatalysts may be created. Based on the stability experiment, GZC-3 shows greater photocatalytic activity after four recycling cycles. As a result, the GZC composite is environmentally friendly and efficient photocatalyst and has the potential to consider in the treatment of dye-contaminated wastewater.

13 April 2023 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
TCTsion Chuni
Tsion Chuni
KDKena Dachasa
Kena Dachasa
FAFekadu Gochole Aga
Fekadu Gochole Aga
TWTadele Hunde Wondimu
Tadele Hunde Wondimu
FFFetene Fufa
Fetene Fufa
Because of its fundamental characteristics, including bioactivity, biodegradability, and nontoxicity, bioactive glasses (BGs) become among the most impressive materials in the area of biomedical applications. It is primarily utilized in the applications of dermal fillers, orthopedic implants, and pharmaceutical delivery systems. Here in this study, simple and continuous methods were employed to produce hollow spherical bioactive glasses (HSBGs) microspheres. Using a spray pyrolysis method, solid and hollow spherical particles were successfully synthesized, and the particle formation mechanism was also discussed in detail. Surface and inner morphologies of synthesized bioactive glass (BG) powders were investigated using scanning electron microscopy (SEM) and transmission electron microscopy (TEM), respectively. BET was employed to measure the pore volume as well as specific surface area for pure BG and BG-derived-PEG powders; all values are below 0.05, demonstrating noticeable distinction among both forms of synthesized powders. Using energy dispersive spectroscopy (EDS), the constituent components of prepared samples were assessed. In addition, by immersing samples in simulated bodily fluid (SBF) for 12 hr, in vitro bioactivity was tested by SEM. The viability of cells for both BG specimens was evaluated at various extraction concentrations by MTT assay (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenylte-trazolium bromide) for 72 hr. Relying on the Ca/P ratio obtained from SEM-EDS, HSBGs possessed higher hydroxyapatite-forming capacity than solid bioactive glasses (SBGs). In addition, the cell viability of both specimens showed that at all extraction concentrations, they pass the standard biocompatibility levels. Therefore, the HSBGs have better biocompatibility and in vitro bioactivity; hence they are promising for future tissue-engineering development.

27 October 2023 in International Journal of Biomaterials
Verified
Journal Article
Open access
PDF file
TATsion Chuni Aklilu
Tsion Chuni Aklilu
BEBethelhem Gashaw Ewnete
Bethelhem Gashaw Ewnete
KDKena Dachasa
Kena Dachasa
KSKanate Sanbaba
Kanate Sanbaba
DTDemeke Tesfaye
Demeke Tesfaye
FFFetene Fufa
Fetene Fufa
In this study, carbon-free and completely soluble hydrogen peroxide (H2O2) was utilized in place of conventional surfactants as a pore-forming agent. Citric acid was also used in low concentration for the hydrolysis reaction. A sol-gel method was used to prepare bioactive glass (BG) specimens of H2O2-untreated BG, 1M, 2M, and 3M H2O2-treated BGs. X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), energy-dispersive spectroscopy (EDS), and nitrogen adsorption/desorption isotherm with the BrunauerEmmettTeller (BET) method were used for analyzing the samples phase, surface morphology, chemical composition, constituent composition, pore size, and specific surface area respectively. In vitro bioactivity, as well as biodegradability tests, was performed on samples by immersing them in simulated body fluid (SBF) solution. According to the results, BG particles treated with 2 M H2O2 exhibited higher specific surface area (SSA), which is 189.55cc/g, and better in vitro bioactivity and biodegradability.

24 August 2023 in ECS Advances
Verified
Journal Article
Open access
TWTadele Hunde Wondimu
Tadele Hunde Wondimu
TDTemesgen Debelo Desissa
Temesgen Debelo Desissa
ADAlemayehu Dubale Duma
Alemayehu Dubale Duma
FBFetene Fufa Bakare
Fetene Fufa Bakare
DKDaniel Manaye Kabtamu
Daniel Manaye Kabtamu
KBKenate Sambaba Bayana
Kenate Sambaba Bayana
Because of its simplicity of evaluation, ability to detect the lowest quantities, and convenience of operation, electrochemical determination of ascorbic acid is gaining popularity. The high sensitivity, selectivity, and low cost, nanosensors have gained enourmous attention in recent years for the detection of active pharmacological compounds and food pollutants. Ni and Ni-containing compounds have a favorable affinity for a number of organic functional groups such as -thio, -hydroxyl, -carboxyl, and -amine. However, its poor conductivity hinders its electrochemical performance. Hence, the procedures for improving the conductivity of metal oxides that are incredibly good studies query to meet the desired level of detection. We devised a straightforward method for concurrently synthesizing silver and nickel oxide nanoparticles on reduced graphene oxide using electrochemical deposition method on a glassy carbon electrode (GCE). The electrodeposited materials were scratched from GCE and characterized for Raman, SEM/EDS, EIS, and XPS. The materials produced after deposition were examined also for Ascorbic Acid (AA) detection in bottled fruit juice and Vitamin C tablets yielded 0.457 μM limits of quantification and 100.61% and 99.40% average recoveries, respectively.