The research aims to verify the universal relationship between vessel shape and the risk of hemolysis using a rheological model of blood reflecting the physiological processes related to blood for any blood vessel. Blood is a multi‐component fluid, the rheology of which depends on many factors, such as the concentration of red blood cells and local shear stress, which significantly affect the process of hemolysis. Blood rheology models used so far cannot be used for all flows and geometries. Therefore, a new rheology model has been introduced suitable for modeling hemolytic flows observed in arteries with atherosclerotic lesions in the in vivo environment. The previously presented model also has advantages in modeling local viscosity in stenosis. Geometries of the blood vessels from computed tomography scans and simplified models of the actual arteries observed during medical procedures were used in the calculations. Population Balance Based Rheology model predicts the concentration of single, deagglomerated red blood cells and the concentration and size of red blood cell agglomerates, which affect blood rheology and hemolysis. Based on the simulations carried out, a correlation was found between the shape of the vessel cavity and the risk of hemolysis. Presented results can be used in the future to create a correlation between the shape of the atherosclerotic lesions and the risk of hemolysis in the blood to make an initial risk assessment for a given patient.

Atherosclerosis affects human health in many ways, leading to disability or premature death due to ischemic heart disease, stroke, or limb ischemia. Poststenotic blood flow disruption may also play an essential role in artery wall impairment linked with hemolysis related to shear stress. The maximum shear stress in the atherosclerotic plaque area is the main parameter determining hemolysis risk. In our work, a 3D internal carotid artery model was built from CT scans performed on patients qualified for percutaneous angioplasty due to its symptomatic stenosis. The obtained stenosis geometries were used to conduct a series of computer simulations to identify critical parameters corresponding to the increase in shear stress in the arteries. Stenosis shape parameters responsible for the increase in shear stress were determined. The effect of changes in the carotid artery size, length, and degree of narrowing on the change in maximum shear stress was demonstrated. Then, a correlation for the quick initial diagnosis of atherosclerotic stenoses regarding the risk of hemolysis was developed. The developed relationship for rapid hemolysis risk assessment uses information from typical non-invasive tests for treated patients. Practical guidelines have been developed regarding which stenosis shape parameters pose a risk of hemolysis, which may be adapted in medical practice.

Background/Objective: Atherosclerosis is becoming increasingly common in modern society. Owing to the increasing number of complex angioplasty procedures, there is an increasing need for training in cases where the risk of periprocedural complications is high. Methods: A procedure was developed to obtain three-dimensional (3D) models and printing of blood vessels. The mechanical and optical properties of the printed materials were also examined. Angioplasty and stent implantation were tested, and the phantom was compared with the clinical data of patients who underwent interventional treatment. Both laser techniques and cone-beam computed tomography of the phantoms were used for comparison. Results: The printed material exhibited mechanical parameters similar to those of blood vessel walls. The refractive index of 1.473 ± 0.002 and high transparency allowed for non-invasive laser examination of the interior of the print. The printed models behaved similarly to human arteries in vivo, allowing training in treatment procedures and considering vessel deformation during the procedure. Models with stents can be analyzed using laser and cone-beam computed tomography to compare stents from different manufacturers. Conclusions: The developed methodology allows for simple and time-efficient production of personalized vessel phantoms.

Background and Objectives: Hypertension increases the risk of developing atherosclerosis and arterial stiffness, with secondarily enhanced wall stress pressure that damages the artery wall. The coexistence of atherosclerosis and hypertension leads to artery stenosis and microvascular angiopathies, during which the intravascular mechanical hemolysis of red blood cells (RBCs) occurs, leading to increased platelet activation, dysfunction of the endothelium and smooth muscle cells due to a decrease in nitric oxide, and the direct harmful effects of hemoglobin and iron released from the red blood cells. This study analyzed the impact of hypertension and physical exercise on the risk of hemolysis in the left coronary artery. Methods: To analyze many different cases and consider the decrease in flow through narrowed arteries, a flow model was adopted that considered hydraulic resistance in the distal section, which depended on the conditions of hypertension and exercise. The commercial ANSYS Fluent 2023R2 software supplemented with user-defined functions was used for the simulation. CFD simulations were performed and compared with the FSI simulation results. Results: The differences obtained between the FSI and CFD simulations were negligible, which allowed the continuation of analyses based only on CFD simulations. The drops in pressure and the risk of hemolysis increased dramatically with increased flow associated with increased exercise. A relationship was observed between the increase in blood pressure and hypertension, but in this case, the increase in blood pressure dropped, and the risk of hemolysis was not so substantial. However, by far, the case of increased physical activity with hypertension had the highest risk of hemolysis, which is associated with an increased risk of clot formation that can block distal arteries and lead to myocardial hypoxia. Conclusions: The influence of hypertension and increased physical exercise on the increased risk of hemolysis has been demonstrated.