This study explores the impact of disinfection techniques on the mechanical properties of poly(lactic acid) (PLA), a crucial material in the production of medical implants, tissue engineering, orthopedic devices and drug delivery systems, owing to its biocompatibility and ease of manufacturing. The focus is on evaluating the effectiveness of ultraviolet (UV) type C (254 nm wavelength) and the combined use of type C and B (310 nm wavelength) disinfection methods. Fifteen tensile test specimens (ASTM D638) and fifteen compression test specimens (ASTM D695) were utilized to assess PLA’s mechanical properties, including yield strength, ultimate strength, and fracture strength. The investigation involved subjecting the specimens to the specified disinfection methods and evaluating these properties both before and after the disinfection process. In the tensile test, a statistically significant difference (p = 0) in yield displacement was observed among the three groups. Additionally, a notable difference (p = 0.047) in fracture displacement was identified between the untreated group and the UVC and UVB combination group. No discernible impact on yield or fracture forces was noted. In the compression test, there was a significant difference (p = 0.04) in yield displacement and a clear difference (p = 0.05) in fracture force between the untreated group and the UVC and UVB combination group. The hybrid combination of UVC and UVB disinfection techniques did not affect yield force in both tensile and compression tests. However, it demonstrated a clear impact on displacement, suggesting its potential as a promising disinfection technique in the medical field.
This study addresses the high cost of traditional dental impression materials by introducing a novel composite material reinforced with wheat bran powder, aiming to reduce expenses while maintaining suitable mechanical performance. Tensile and compression test specimens were prepared according to the ASTM D412 and ASTM D575 standards, respectively, to evaluate the mechanical properties of the pure elastomer and the wheat-bran-reinforced composite. Comparative t-tests were conducted to analyze the tensile and compression strengths of both materials, focusing on their cost-effectiveness and suitability for dental applications. The results demonstrate that the wheat-bran-reinforced composite exhibits compression strength (105 MPa) comparable to that of the pure elastomer while offering controlled deformation and enhanced stiffness under compression. Although the composite shows reduced tensile strength (7 MPa vs. 11 MPa), its performance remains adequate for applications requiring moderate tensile properties. Notably, the new material reduces costs by approximately 50%, making it an economical and sustainable alternative for dental impression materials. This innovation aligns with sustainable practices by incorporating natural fibers and offers dentists a cost-effective solution without compromising on performance.
Natural bio-based fillers may support more sustainable dental impression materials, but their mechanical effects require verification. This study evaluated the compressive behavior of a light-body dental impression material containing 50 wt.% date seed powder (DSP) and explored whether a computational feature-matching approach could complement conventional statistics. Three specimens per formulation were compression-tested according to ASTM D575. Displacement was evaluated at human bite-force reference levels of 220, 260, 300, and 350 N. Welch’s independent-samples t-test was complemented by exploratory feature matching using seven original-domain and seven FFT-derived features, generating 14 features and 91 two-feature combinations. DSP showed consistently lower mean displacement than the Control, with differences of 0.147, 0.165, 0.182, and 0.201 mm, respectively; none reached statistical significance (p = 0.340, 0.311, 0.283, and 0.264). The computational analysis was concordant with the statistical findings, with the lowest standardized mean matched distance of 0.114497 and relatively limited separation in several top-ranked feature representations. Within the tested specimens, the DSP formulation showed encouraging compressive behavior and represents a promising sustainable natural filler. The exploratory computational approach also appears promising as a complementary multidimensional tool, but not a replacement for conventional statistical analysis.