This study aimed to evaluate the impact of UVC (Ultraviolet C Radiation), detergent foam, and alcohol (70%) sterilization methods on the surface morphology of acrylonitrile–butadiene–styrene (ABS) specimens using a novel SEM (Scanning Electron Microscope) image processing approach. Twelve 3D-printed specimens were prepared, and five concentric circular regions of interest (ROIs) per specimen were analyzed. Three quantitative descriptors—defect area fraction, anisotropy ratio, and RMS (Root Mean Square) roughness—were extracted to assess surface alterations. To validate the image-based findings, EDX (Energy-Dispersive X-ray Spectroscopy) elemental analysis for carbon (C), nitrogen (N), and oxygen (O) was employed as a complementary and traditional benchmark technique. Statistical comparisons and p-value heat maps revealed strong convergence between SEM and EDX results. UVC sterilization consistently preserved surface morphology and elemental stability, showing the lowest defect fraction (p = 0.2684), balanced anisotropy (p = 0.02481), and minimal oxygen incorporation (O = 7.6). Foam sterilization produced intermediate effects, with significant anisotropy changes (p = 0.007456) and reduced nitrogen (19.6). Alcohol sterilization induced the most severe damage, characterized by high defect density, increased roughness, and elemental imbalance (N = 17.3, O = 13.9), confirming oxidative degradation. The convergence of SEM and EDX outcomes demonstrates that SEM image processing is a reliable novel method validated by traditional elemental analysis. Together, these approaches provide a robust framework for ranking sterilization efficacy, with UVC identified as the most favorable method, detergent foam as an acceptable alternative, and alcohol as the least effective due to its destabilizing effects.
Natural bio-based fillers may support more sustainable dental impression materials, but their mechanical effects require verification. This study evaluated the compressive behavior of a light-body dental impression material containing 50 wt.% date seed powder (DSP) and explored whether a computational feature-matching approach could complement conventional statistics. Three specimens per formulation were compression-tested according to ASTM D575. Displacement was evaluated at human bite-force reference levels of 220, 260, 300, and 350 N. Welch’s independent-samples t-test was complemented by exploratory feature matching using seven original-domain and seven FFT-derived features, generating 14 features and 91 two-feature combinations. DSP showed consistently lower mean displacement than the Control, with differences of 0.147, 0.165, 0.182, and 0.201 mm, respectively; none reached statistical significance (p = 0.340, 0.311, 0.283, and 0.264). The computational analysis was concordant with the statistical findings, with the lowest standardized mean matched distance of 0.114497 and relatively limited separation in several top-ranked feature representations. Within the tested specimens, the DSP formulation showed encouraging compressive behavior and represents a promising sustainable natural filler. The exploratory computational approach also appears promising as a complementary multidimensional tool, but not a replacement for conventional statistical analysis.