This article investigates the presence of a new interferometric signal in multilooked synthetic aperture radar (SAR) interferograms that cannot be attributed to the atmospheric or Earth-surface topography changes. The observed signal is short-lived and decays with the temporal baseline; however, it is distinct from the stochastic noise attributed to temporal decorrelation. The presence of such a fading signal introduces a systematic phase component, particularly in short temporal baseline interferograms. If unattended, it biases the estimation of Earth surface deformation from SAR time series. Here, the contribution of the mentioned phase component is quantitatively assessed. The biasing impact on the deformation-signal retrieval is further evaluated. A quality measure is introduced to allow the prediction of the associated error with the fading signals. Moreover, a practical solution for the mitigation of this physical signal is discussed; special attention is paid to the efficient processing of Big Data from modern SAR missions such as Sentinel-1 and NISAR. Adopting the proposed solution, the deformation bias is shown to decrease significantly. Based on these analyses, we put forward our recommendations for efficient and accurate deformation-signal retrieval from large stacks of multilooked interferograms.
24 May 2018 in IEEE Transactions on Geoscience and Remote Sensing
Signal decorrelation poses a limitation to multipass SAR interferometry. In pursuit of overcoming this limitation to achieve high-precision deformation estimates, different techniques have been developed, with short baseline subset, SqueeSAR, and CAESAR as the overarching schemes. These different analysis approaches raise the question of their efficiency and limitation in phase and consequently deformation estimation. This contribution first addresses this question and then proposes a new estimator with improved performance, called Eigendecomposition-based Maximum-likelihood-estimator of Interferometric phase (EMI). The proposed estimator combines the advantages of the state-of-the-art techniques. Identical to CAESAR, EMI is solved using eigendecomposition; it is therefore computationally efficient and straightforward in implementation. Similar to SqueeSAR, EMI is a maximum-likelihood-estimator; hence, it retains estimation efficiency. The computational and estimation efficiency of EMI renders it as an optimum choice for phase estimation. A further marriage of EMI with the proposed Sequential Estimator by Ansari et al. provides an efficient processing scheme tailored to the analysis of Big InSAR Data. EMI is formulated and verified in relation to the state-of-the-art approaches via mathematical formulation, simulation analysis, and experiments with time series of Sentinel-1 data over the volcanic island of Vulcano, Italy.
1 September 2017 in IEEE Transactions on Geoscience and Remote Sensing
Wide-swath synthetic aperture radar (SAR) missions with short revisit times, such as Sentinel-1 and the planned NISAR and Tandem-L, provide an unprecedented wealth of interferometric SAR (InSAR) time series. However, the processing of the emerging Big Data is challenging for state-of-the-art InSAR analysis techniques. This contribution introduces a novel approach, named Sequential Estimator, for efficient estimation of the interferometric phase from long InSAR time series. The algorithm uses recursive estimation and analysis of the data covariance matrix via division of the data into small batches, followed by the compression of the data batches. From each compressed data batch artificial interferograms are formed, resulting in a strong data reduction. Such interferograms are used to link the “older” data batches with the most recent acquisitions and thus to reconstruct the phase time series. This scheme avoids the necessity of reprocessing the entire data stack at the face of each new acquisition. The proposed estimator introduces negligible degradation compared to the Cramer-Rao lower bound under realistic coherence scenarios. The estimator may therefore be adapted for high-precision near-real-time processing of InSAR and accommodate the conversion of InSAR from an offline to a monitoring geodetic tool. The performance of the Sequential Estimator is compared to state-of-the-art techniques via simulations and application to Sentinel-1 data.
24 October 2023 in IEEE Transactions on Geoscience and Remote Sensing
Subtle volcanic deformations point to volcanic activities, and monitoring them helps predict eruptions. Today, it is possible to remotely detect volcanic deformation in mm/year scale thanks to advances in interferometric synthetic aperture radar (InSAR). This article proposes a framework based on a deep learning model to automatically discriminate subtle volcanic deformations from other deformation types in five-year-long InSAR stacks. Models are trained on a synthetic training set. To better understand and improve the models, explainable artificial intelligence (AI) analyses are performed. In initial models, Gradient-weighted Class Activation Mapping (Grad-CAM) linked new-found patterns of slope processes and salt lake deformations to false-positive detections. The models are then improved by fine-tuning (FT) with a hybrid synthetic-real data, and additional performance is extracted by low-pass spatial filtering (LSF) of the real test set. The t-distributed stochastic neighbor embedding (t-SNE) latent feature visualization confirmed the similarity and shortcomings of the FT set, highlighting the problem of elevation components in residual tropospheric noise. After fine-tuning, all the volcanic deformations are detected, including the smallest one, Lazufre, deforming 5 mm/year. The first time confirmed deformation of Cerro El Condor is observed, deforming 9.9–17.5 mm/year. Finally, sensitivity analysis uncovered the model’s minimal detectable deformation of 2 mm/year.
7 January 2016 in IEEE Geoscience and Remote Sensing Letters
A conventional interferometric synthetic aperture radar (SAR) system provides 1-D line-of-sight motion measurements from repeat-pass observations. Two-dimensional motions may be measured by combining two observations from ascending and descending geometries. The third motion component may be retrieved by adding a third geometry and/or by integrating along-track measurements although with much reduced precision compared to the other two components. Several options exist to improve the accuracy of retrieving the third motion component, such as combining left- and right-looking observations or exploiting recently proposed innovative SAR acquisition modes (BiDiSAR and SuperSAR). These options are, however, challenging for future SAR systems based on large reflector antennae, due to lack of capability to electronic beam steering or frequent toggle between left- and right-looking modes. Therefore, in this letter, we assess and compare the realistic acquisition scenarios for a reflector-based SAR in an attempt to optimize the achievable 3-D precision. Investigating the squinted SAR geometry as one of the feasible scenarios, we show that a squint of 13.5° will yield comparable performance to the left-looking acquisition, while further squinting outperforms this or other feasible configurations. As an optimum configuration for 3-D retrieval, the squinted acquisition is further elaborated: the different acquisition plans considering a constellation of two satellites as well as the challenges for data processing are addressed.
Constraining the deformation analysis to scatterers with high phase coherence, known as persistent scatterers (PS), in the InSAR time series plays a major role in advanced coherent approaches such as Persistent Scatterer Interferometry (PSI). Although crucial in overcoming the shortcomings of conventional InSAR in retrieving the deformation signals, this constraint appears to be too strict and lead to information loss in cases where the scatterers are coherent in merely a short period of the time series. Exploiting such scatterers, referred to as temporal coherent scatterers (TCS), is a necessity in PSI analysis in order to enhance the density of the resulted point clouds and consequently the quality of PSI. In here, statistical properties of the SAR calibrated amplitude time series are exploited to propose a new method for detection of the TCSs and estimation of the coherent intervals. The proposed methodology also allows for estimation of signal to clutter ratio (SCR) as an indication of the phase coherence. The method is evaluated using the simulated SAR stack as well as TerraSAR-X high resolution complex images.