Atiye Hulya Obdan

Dr. Atiye Hulya Obdan

Department of Electrical Engineering, Yıldız Technical University, Istanbul, İstanbul, Turkey (Türkiye)
orcid

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 May 2021 in Electrica
Verified
Journal Article
Open access
FGFerudun Gökçegöz
Ferudun Gökçegöz
EAErdem AKBOY
Erdem AKBOY
AOAtiye Hulya Obdan
Atiye Hulya Obdan
Flyback converters exhibit the advantages of simple structure, low cost, small volume, isolation, and control simplicity. However, flyback converters demonstrate disadvantages like leakage inductance; hence, losses are incurred. Losses pertain to the requirement of an external cooling system and external costs. It also results in low efficiency and the use of flyback converters in low-power applications. The discontinuous conduction mode (DCM) is used for low-power applications to achieve efficiency. In flyback converters, the reverse recovery losses of the diode are eliminated with DCM. There are many applications of flyback converters in industrial systems, such as led drivers, battery charge systems, telecommunication systems. In this study, analysis and design of a flyback converter for universal input and wide load ranges was performed. The detailed theoretical analysis was conducted and verified with the implementation of a DCM flyback converter for 85 V-265 V RMS AC input voltage, 12 Vo output, 100 kHz switching frequency, and 48 W output power. The overall efficiency of the proposed converter at full load was measured as 81%. Additionally, external cooling systems were not required, which highlighted the development of a compact design with small volume and ease of application for an industrial system that requires the inclusion of more serial flyback converters. Cite this article as: F. Gökçegöz, E. Akboy, A. H. Obdan, “Analysis and Design of a Flyback Converter for Universal Input and Wide Load Ranges”, Electrica, vol. 21, no. 2, pp. 235-241, May, 2021.

30 November 2023 in IEEE Access
Verified
Journal Article
Open access
FZFatih Zungor
Fatih Zungor
HBHaci Bodur
Haci Bodur
MÖMetin Öztürk
Metin Öztürk
AOAtiye Hulya Obdan
Atiye Hulya Obdan
Induction heating is a commonly used method of heating in household appliances due to its efficiency and high reliability reasons. In induction cookers, resonant inverter circuits are frequently chosen due to their high efficiency and the ability to facilitate soft switching. Among the resonant inverters used in induction cookers, half-bridge series resonant (HBSR) inverter topology is often preferred for applications where a balance between cost and power is required. Despite the numerous circuit designs proposed to enhance the performance of HBSR converters, a standardized design methodology suitable for circuit design dedicated to induction cookers has not yet been established. In this study, a new HBSR inverter design methodology supported by various theoretical equations is proposed for use in household induction cooktops. In the proposed design, the first step involves calculating the equivalent resistance value of the coil. Subsequently, a coil capable of achieving to match this resistance value is designed mechanically. Finally, the capacitance value for the resonance circuit is calculated. Calculating the equivalent resistance value before designing the coil, in particular, enables the practical implementation of a viable coil design. To validate the proposed design methodology, it is necessary to control the power transferred to the resonant circuit. For this purpose, closed-loop power control is achieved using the peak value of coil current through frequency modulation technique. Additionally, it needs to be also proved that the implementation circuit works with soft switching between maximum and minimum switch cut-off current. To assess the compliance of the proposed design method with standards, thermal measurements were taken from semiconductors, EMC measurements were conducted to verify compliance with the IEC 55014-1 standard, and finally, the power transferred to the resonant circuit was calculated using oscilloscope measurements. Using the proposed design method, calculations were performed for a 20cm diameter iron pot with a 2300VA power transfer at 230VAC mains voltage. Subsequently, these calculations were verified using various simulation tools, and finally, a prototype implementation circuit was realized to demonstrate the reliability of the proposed design method.

1 January 2005 in Electric Power Components and Systems
Verified
Journal Article
Closed access
AOAtiye Hulya Obdan
Atiye Hulya Obdan
HBHaci Bodur
Haci Bodur
IAIsmail Aksoy
Ismail Aksoy
NBNur Bekiroglu
Nur Bekiroglu
GYGulderen Yildirmaz
Gulderen Yildirmaz
In this article, a new parallel resonant DC link (PRDCL) that provides soft switching (SS) and pulse width modulated (PWM) operation for inverters is presented. The new PRDCL ensures zero crossings for a time period, and at any time required for SS and PWM operation of the inverters, respectively. Moreover, the proposed PRDCL is realized by using only one auxiliary active switch, has a simple structure and ease of control, and operates under SS conditions. All switches in the soft switching inverters (SSI) equipped with the new PRDCL operate with soft switching, and are subjected to no additional voltage and current stresses. A detailed steady-state analysis of the proposed PRDCL is presented, and this theoretical analysis is verified by a prototype of a 250 V, 50 kHz and 1250 W circuit.

1 July 2024 in IEEE Sensors Journal
Verified
Journal Article
Closed access
ECEmre Celik
Emre Celik
AOAtiye Hulya Obdan
Atiye Hulya Obdan
In this article, a new absolute encoder design based on a microcontroller (μC), which is cheap and simple to manufacture and produces high-precision linear output, is presented. Our demodulation algorithm is based on the linearization of highly linear regions around the midpoints of sinusoidal signals generated by sensors. In this study, we manufactured the encoder disk ourselves, and by adjusting the sensor parameters optimally, we successfully obtained more linear signals compared to the signals produced by conventional sine-cosine encoders. The obtained pseudo-linear sections are made more linear through third-order polynomial regression. Additionally, with the help of an extra track on the disk and two sensors, segment-specific linearization has been applied to pseudo-linear segments that are not exactly the same one-to-one. This approach ensures the high accuracy of the encoder, unlike studies that apply the same correction to each sinusoid generated. In addition, the system has gained the absolute encoder function, with a simpler disk structure that is easier to manufacture than the code disks of traditional absolute encoders. The performance of the proposed encoder is verified with an optical encoder arrangement of 2x10 5 pulses per revolution, and an error of 0.00203° per revolution is obtained.

20 November 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
AEAhmet ERKEN
Ahmet ERKEN
AOAtiye Hulya Obdan
Atiye Hulya Obdan
Modern induction cookers have started to demand challenging features such as slim design, high power ratings, high performance, and silence. All those requirements are directly related to the power semiconductors used in power converters. Si (silicon)-based power semiconductors are not capable of answering those demands because of strict operating conditions, such as high ambient temperatures. Therefore, WBG (Wide Band Gap) power semiconductors have been getting attention. In this study, WBG power semiconductors will be compared with Si-based IGBT (Insulated Gate Bipolar Transistor) under different operating conditions. The best option to use WBG power semiconductors in modern induction cookers will be analyzed. The performance of a series-resonant half-bridge converter was evaluated under various operating conditions. Measurements were obtained from the real operating conditions of induction hobs. The switching frequency is changed from 20 kHz to 100 kHz, while the power rating is increased to 3.7 kW. In addition to traditional 4-zone induction cooktops, this discussion also provides a comprehensive analysis of high-segment, fully flexible induction cooktops. While the IGBT-based design exhibits 25.79 W power loss per device, the WBG device exhibits 6.87 W in the maximum power condition of conventional induction cooker operation. When it comes to high-frequency operation, the WBG power device exhibits 10.05 W at 95 kHz. Total power loss is still well below that of the IGBT-based conventional design. Appropriate usage of WBG power semiconductors in modern induction cookers can exploit many more benefits than Si-based designs.

7 September 2024 in Applied Sciences
Verified
Journal Article
Open access
AEAhmet ERKEN
Ahmet ERKEN
AOAtiye Hulya Obdan
Atiye Hulya Obdan
The use of wide band gap (WBG) semiconductor switches in power converters is increasing day by day due to their superior chemical and physical properties, such as electrical field strength, drift speed, and thermal conductivity. These new-generation power switches offer advantages over traditional induction cooker systems, such as fast and environmentally friendly heating. The size of passive components can be reduced, and the decreasing inductance value of induction coils and capacitors with low ESR (equivalent series resistance) values contributes to total efficiency. Other design parameters, such as passive components with lower values, heatsinks with low volumes, cooling fans with low power, and induction coils with fewer turns, can offset the cost of WBG power devices. High-frequency operation can also be effective in heating non-ferromagnetic materials like aluminum and copper, making them suitable for heating these types of pans without complex induction coil and power converter designs. However, the use of these new generation power switches necessitates a re-examination of induction coil design. High switching frequency leads to a high resonance frequency in the power converter, which requires lower-value passive components compared to conventional cookers. The most important component is the induction coil, which requires fewer turns and magnetic cores. This study examines the induction heating equivalent circuit, discusses the general structure and design parameters of the induction coil, and performs FEM (finite element method) analyses using Ansys Maxwell. The results show that the induction coil inductance value in new-generation cookers decreases by 80% compared to traditional cookers, and the number of windings and magnetic cores decreases by 50%. These analyses, performed for high-power applications, are also performed for low-power applications. While the inductance value of the induction coil is 90 μH at low frequencies, it is reduced to the range of 5 μH to 20 μH at high frequencies. The number of windings is reduced by half or a quarter. The new-generation cooker system experimentally verifies the coil design based on the parameters derived from the analysis.