Biocatalysts based on the methylotrophic yeast Ogataea polymorpha VKM Y-2559 immobilized in polymer-based nanocomposites for the treatment of methanol-containing wastewater were developed. The organosilica composites with different matrix-to-filler ratios derived from TEOS/MTES in the presence of PEG (SP_EG-composite) and from silicon-polyethylene glycol (STP_EG-composite) differ in the structure of the silicate phase and its distribution in the composite matrix. Methods of fluorescent and scanning microscopy first confirmed the formation of an organosilica shell around living yeast cells during sol-gel bio-STP_EG-composite synthesis. Biosensors based on the yeast cells immobilized in STP_EG- and SP_EG-composites are characterized by effective operation: the coefficient of sensitivity is 0.85 ± 0.07 mgO₂ × min⁻¹ × mmol⁻¹ and 0.87 ± 0.05 mgO₂ × min⁻¹ × mmol⁻¹, and the long-term stability is 10 and 15 days, respectively. The encapsulated microbial cells are protected from UV radiation and the toxic action of heavy metal ions. Biofilters based on the developed biocatalysts are characterized by high effectiveness in the utilization of methanol-rich wastewater—their oxidative power reached 900 gO₂/(m³ × cycle), and their purification degree was up to 60%.

Environmental pollution is becoming ubiquitous; it has a negative impact on ecosystem diversity and worsens the quality of human life. This review discusses the possibility of applying the plant microbial fuel cells (PMFCs) technology for concurrent processes of electricity generation and the purification of water and soil ecosystems from organic pollutants, particularly from synthetic surfactants and heavy metals. The review describes PMFCs’ functioning mechanisms and highlights the issues of PMFCs’ environmental application. Generally, this work summarizes different approaches to PMFC development and to the potential usage of such hybrid bioelectrochemical systems for environmental protection.

The development of biofuel cells (BFCs) currently has high potential since these devices can be used as alternative energy sources. This work studies promising materials for biomaterial immobilization in bioelectrochemical devices based on a comparative analysis of the energy characteristics (generated potential, internal resistance, power) of biofuel cells. Bioanodes are formed by the immobilization of membrane-bound enzyme systems of Gluconobacter oxydans VKM V-1280 bacteria containing pyrroloquinolinquinone-dependent dehydrogenases into hydrogels of polymer-based composites with carbon nanotubes. Natural and synthetic polymers are used as matrices, and multi-walled carbon nanotubes oxidized in hydrogen peroxide vapor (MWCNTox) are used as fillers. The intensity ratio of two characteristic peaks associated with the presence of atoms C in the sp³ and sp² hybridization for the pristine and oxidized materials is 0.933 and 0.766, respectively. This proves a reduced degree of MWCNTox defectiveness compared to the pristine nanotubes. MWCNTox in the bioanode composites significantly improve the energy characteristics of the BFCs. Chitosan hydrogel in composition with MWCNTox is the most promising material for biocatalyst immobilization for the development of bioelectrochemical systems. The maximum power density was 1.39 × 10⁻⁵ W/mm², which is 2 times higher than the power of BFCs based on other polymer nanocomposites.