Sodium‐ion batteries (SIBs) have attracted a significant amount of interest in the past decade as a credible alternative to the lithium‐ion batteries (LIBs) widely used today. The abundance of sodium, along with the potential utilization of electrode materials without critical elements in their composition, led to the intensification of research on SIBs. Hard carbon (HC), is identified as the most suitable negative electrode for SIBs. It can be obtained by pyrolysis of eco‐friendly and renewable precursors, such as biomasses, biopolymers or synthetic polymers. Distinct HC properties can be obtained by tuning the precursors and the synthesis conditions, with a direct impact on the performance of SIBs. In this work, an in‐depth overview of how the synthesis parameters of HC affect their properties (porosity, structure, morphology, surface chemistry, and defects) is provided. Several synthesis‐property relationships are established based on a database created using extensive literature data. Moreover, HC properties are correlated with the electrochemical performance (initial Coulombic efficiency (iCE) and reversible capacity) vs. Na, in half‐cells. The Na‐ion storage mechanisms and solid electrolyte interphase (SEI) formation are discussed along with the HC performance in full‐cell devices, as well as the SIB prototypes and a short history of SIBs enterprises.
Although transition metal sulfides have prodigious potential for use as electrode materials because of their low electronegativities, their large volume changes inhibit broad application. Moreover, there is only limited knowledge of the ageing processes of these materials at the nanoscale. Herein, nano-C/FeS2 materials were prepared via one-pot syntheses from green biodegradable carbon precursors, followed by activation and sulfidation. The increased activation/sulfidation time led to an increase in the size of the nanoparticles (7 to 17 nm) and their aggregation, as well as in an increase in the specific surface area. The materials were then used as electrodes in 2-electrode symmetric supercapacitors with 2 M KOH. The activation process resulted in improved capacitance (60 F g−1 at 0.1 A g−1) and rate capability (36%) depending on the composite porosity, conductivity, and size of the FeS2 particles. The ageing of the FeS2 nanoparticles was investigated under air, and a progressive transformation of the nano-FeS2 into hydrated iron hydroxy sulfate with a significant morphological modification was observed, resulting in drastic decreases in the capacitance (70%) and retention. In contrast, the ageing of nano-FeS2 during cycling led to the formation of a supplementary iron oxyhydroxide phase, which contributed to the enhanced capacitance (57%) and long-term cycling (132% up to 10,000 cycles) of the device.
4 July 2025 in Chemical Engineering Journal Advances