The application of a non-stationary regime of temperature modulation in metal oxide semiconductor sensor based on SnO2–Ag leads not only to a strongly increased sensor response, but also to a considerably improved sensor selectivity toward hydrogen sulfide. Selectivity with respect to other reducing gases (CO, NH3, H2) is about five orders of magnitude, enabling a correct selective determination of H2S in the presence of interfering gas components.
3 August 2024 in International Journal of Hydrogen Energy
Semiconductor sensors are often used to solve an important practical problem – the determination of the concentration of carbon monoxide in the air. Their disadvantage is the low selectivity, which can lead to false alarm when other reducing gases such as ammonia or ethanol vapor appear in the air. To increase the selectivity, we used pulsed temperature modulation in combination with a special composition of the gas sensitive layer of the sensor. The use of pulse temperature modulation has revealed the features of the analyte associated with the sorption kinetics at the surface of the sensor, with the kinetics of the chemical interaction between reductant analytes and chemisorbed oxygen, and the kinetics of desorption of chemical interaction products. However, information on the qualitative composition of the medium is contained in the experimental data in an implicit form, because the qualitative analysis procedure with the use of low selectivity sensors has so far remained undeveloped. In this paper, we proposed a qualitative analysis method based on the power-law regression model that relates the concentration of analyte gas to the electrical resistance of the sensor at various times during the measurement cycle. The experimental procedure shown in our work leads to an increase in the sensitivity of the quantitative analysis by one or two orders of magnitude depending on the concentration of carbon monoxide.
In this study, multivariate data processing during thermal modulation of the SnO2–PdO gas sensor was performed using the multivariate calibration (MC) method. We propose to supplement this method with a procedure that allows the solving of problems of both quantitative and qualitative analysis. The advantage of the extended method (Multivariate Calibration for Selective Analysis, MCSA) compared to other methods is its modest requirements for computing resources, which allows it to be easily implemented on standard microcontrollers. The MCSA method opens up the prospect of creating compact gas analyzers of a new generation, capable of selective gas analysis in hard-to-reach places in an autonomous mode. The implementation of the MCSA method was demonstrated using the example of selective determination of hydrogen sulfide and carbon monoxide by a sensor whose temperature periodically changed from 100 to 450 °C. The training sample data were transformed by the MCSA method, which allowed for successful qualitative and quantitative analysis of the test sample data.
Selective analysis of CO gas, hydrogen and hydrogen sulfide was carried out using single metal oxide sensor. Non-stationary sensor heating mode allowed discovering individual peculiarities of each gas in question. Resistance vs. time curves were converted into multidimensional data arrays and processed by chemometrics methods; as a result, qualitative and quantitative analysis of single-component gas systems was successfully carried out.
Highly selective hydrogen sulfide sensor based on 3 wt% Ruthenium doped In2O3 obtained by biotemplate synthesis was fabricated. For this, purified cellulose was impregnated with a solution containing Indium acetate In(CH3COO)3 and Ruthenium acetylacetonate Ru(C5H7O2)3, dried and calcinated at 600 оС. Nanomaterial obtained using this method consists of sintered 15 – 20 nm grains. The limit of Н2S detection of the sensor is much below 100 ppb. The sensor characteristics of the sensor were determined both at stationary temperature and at the pulse heating of the sensor from 100 to 450 оС with 15 s period. Sensor response to 10 ppm of Н2S at 150 оС is equal to 52, while the response in the pulsing heating regime exceeds the value of 185. The selectivity coefficient of the sensor with respect to carbon monoxide, hydrogen and ammonia gas at 150 оС is of about 100, this coefficient increases up to ~1000, when temperature modulation is used for sensor operation. The response of the sensor doesn’t decrease in humid atmosphere.