High-speed permanent-magnet synchronous machines (HS PMSMs) are a popular topology among modern electrical machines. Suitable applications for such machines are low-power vacuum pumps, compressors, and chillers. This paper describes a systematic design methodology for an HS PMSM using two case studies. The design process for such high-speed (HS) machines is multidisciplinary and highly iterative due to the complex interaction of the many design variables involved. Consequently, no single optimum solution exists, and multiple possible solutions can meet the customer requirements. Practical solutions should be within acceptable thermal limits, should be energy-efficient, and should be rigid enough to withstand the forces exerted during operation. The proposed design flow is divided into steps that are presented in this paper in the form of a flowchart with emphasis on mechanical aspects. Each step represents a task for a thermal, mechanical, or electrical engineer. The features of each step and the prerequisites for moving to the next step are discussed. The described methodology was implemented in the design of two HS PMSMs. The output performance results of the design flow are compared with measured results of the prototypes. The design process described in this paper provides a straightforward procedure for the multidisciplinary design of HS permanent magnet electrical machines.

High-speed solid-rotor induction machines (HSIMs) are popular within high-speed (HS) applications because of their high rotor structural integrity and their fairly well-established manufacturing process guaranteeing high quality series products. Designing a new HS electric machine requires a multidisciplinary team to accomplish the machine performance desired. In case of a HS machine design, the components and applied materials often reach their physical limits at the rated operating condition. Therefore, the design process is highly iterative and, thus, a systematic approach has a high potential to reduce the time of the design phase significantly. In this article, a systematic design process is proposed for a modular, multimegawatt (MMW) HSIM with three radial active magnetic bearings. The process includes a traditional multidisciplinary design flow with extra critical aspects of MMW HS machines: manufacturability, bearing system, housing, and operating unit. In addition, the manufactured machine is reported. The proposed systematic design process is described, including several multidisciplinary critical design aspects of HS machinery.

Real-world products and physics-based simulations are becoming interconnected. In particular, real-time capable dynamic simulation has made it possible for simulation models to run in parallel and simultaneously with operating machinery. This capability combined with state observer techniques such as Kalman filtering have enabled the synchronization between simulation and the real world. State estimator techniques can be applied to estimate unmeasured quantities, also referred as virtual sensing, or to enhance the quality of measured signals. Although synchronized models could be used in a number of ways, value creation and business model development are currently defining the most practical and beneficial use cases from a business perspective. The research reported here reveals the communication and collaboration methods that lead to economically relevant technology solutions. Two case examples are given that demonstrate the proposed methodology. The work benefited from the broad perspective of researchers from different backgrounds and the joint effort to drive the technology development towards business relevant cases.