Donghyun Shin

Mr. Donghyun Shin

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 January 2024 in IEEE Access
Verified
Journal Article
Open access
KCKeun-Yong Chung
Keun-Yong Chung
HKHonggu Kim
Honggu Kim
YAYerim An
Yerim An
KSKiho Seong
Kiho Seong
DSDonghyun Shin
Donghyun Shin
YSYong Shim
Yong Shim
Process-in-memory (PIM) is an emerging computing paradigm to overcome the energy bottleneck inherent in conventional computing platform. While PIM utilizes several types of memory elements, SRAM based PIM has been researched extensively for its high scalability and feasibility by using CMOS process technology. In this work, we proposed 8T SRAM based process-in-memory system with current mirror for accurate MAC operation. To resolve the nonlinearity issue inherent in current-based SRAM MAC macro, we utilized cascaded current mirror. Furthermore, to enable more precise MAC operation, we allocated RWL timing pulses which drive 8T SRAM bitcells in the middle of timing duration. Our PIM architecture realize 4 bit input, 4 bit weight and 4 bit output precisions. Prototype chip has been fabricated using TSMC 65nm GP process technology. Measurement result has proved the MAC operation linearity of designed 8T SRAM based PIM system, and its throughput and energy efficiency with 0.29 GOPs and 1.05 TOPs/W. Software level analysis proved that our design can achieve upto 98.02 percent accuracy for MNIST dataset classification and 94.93 percent accuracy for CIFAR-10 dataset classification.

7 March 2024 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
DSDonghyun Shin
Donghyun Shin
CJChunghee Jang
Chunghee Jang
YKYoungkyu Kim
Youngkyu Kim
KHKim Tae Hyoung
Kim Tae Hyoung
SLSukho Lee
Sukho Lee
KBKwang-Hyun Baek
Kwang-Hyun Baek
This brief introduces a current-mode DC-DC buck converter that operates without performance degradations, even when the inductance value changes. The proposed circuit can be widely utilized to ensure the stable operation of various systems, as inductor values in PMICs may fluctuate despite being identical components. The proposed Inductance-Variation-Insensitive (IVI) buck converter directly senses the rate of change of inductor current and transmits information about the output voltage and inductance to a dynamic ramp generator. The dynamic ramp generator produces a ramp signal proportionate to the sensed inductor current slope, thereby maintaining a deadbeat state and preventing subharmonic oscillations. This innovative approach enables the converter to function seamlessly across a wide range of output values while maintaining overall stability. The proposed buck converter is fabricated using a 0.18 m 1P6M CMOS process, occupying an active area of 0.82 mm2. Experimental results demonstrate its stable operation over a broad range of output voltages, even in the presence of inductance variations, when compared to conventional fixed-ramp approaches. It exhibits a transient response recovery time of 3.9 s for a load change from 50 mA to 350 mA and 4.7 s for the reverse change, from 350 mA to 50 mA. Furthermore, this work achieves a maximum power efficiency of 90.5%, accompanied by an output ripple of less than 30 mV.

12 January 2025 in Energies
Verified
Journal Article
Open access
PDF file
YKYoungkyu Kim
Youngkyu Kim
CJChung-Hee Jang
Chung-Hee Jang
DSDonghyun Shin
Donghyun Shin
KBKwang-Hyun Baek
Kwang-Hyun Baek
This paper introduces a voltage-mode DC-DC buck converter designed to address the challenges of high-frequency operation. The proposed comparator-less Reactive Ramp Generator (RRG) topology mitigates the issues associated with comparator delays, achieving a fast load transient response. By eliminating all comparators from the buck converter’s control circuit, we prevent potential delay-induced malfunctions, thereby enhancing overall operational reliability. The rapid response of the RRG, enabled by a short feedback loop, allows for swift output voltage regulation during load transients. Replacing comparators in the PWM controller with inverters effectively removes delay issues without adding complexity. Since the proposed design retains the conventional voltage-mode transfer function, standard type-3 compensation is readily applicable. Operating with a 3.3 V input, the buck converter provides an output range from 0.65 V to 3.0 V, achieving a settling time of 0.802 µs for load changes from 200 mA to 1 A, and 1.27 µs for load changes from 1 A to 200 mA. The proposed architecture achieves a peak efficiency of 92.78% at 2.4 V and 600 mA.

16 January 2024 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
CJChunghee Jang
Chunghee Jang
DSDonghyun Shin
Donghyun Shin
YKYoungkyu Kim
Youngkyu Kim
KHKim Tae Hyoung
Kim Tae Hyoung
SLSukho Lee
Sukho Lee
KBKwang-Hyun Baek
Kwang-Hyun Baek
This brief presents a reconfigurable step-down switched-capacitor power converter fabricated using a 180 nm CMOS process for low-power applications. The proposed Optimized Partial Series-Parallel (OPSP) topology aims to achieve an intermediate voltage conversion ratio while more effectively minimizing parasitic capacitor losses. This improvement is realized by eliminating one of the flying capacitors, specially the one responsible for the largest parasitic capacitor voltage swing, distinguishing it from the previously reported Partial Series-Parallel (PSP) topology. Furthermore, the use of NMOS capacitor in conjunction with flying parasitic junction capacitors is also proposed to enhance the capacitor density. This switched-capacitor power converter is capable of delivering a 1.8 V output within an input voltage range spanning from 3.1 V to 4.1 V. Employing the methods outlined in this paper enables the attainment of a peak power conversion efficiency of 83.1% when the load current is 1.8 mA.

2 April 2026 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
CJChunghee Jang
Chunghee Jang
DSDonghyun Shin
Donghyun Shin
ILInsu Lee
Insu Lee
KBKwang-Hyun Baek
Kwang-Hyun Baek
This article presents a voltage-stacked energy-recycling switched-capacitor (ERSC) boost converter for biasing single-photon avalanche diodes (SPADs) used in LiDAR systems. The boost converter used in such systems must maintain high efficiency while providing a wide output voltage range to cover the wide system dynamic range and the temperature-sensitive variation of the SPADs breakdown voltage. To these challenges using a single 5V input supply, the proposed converter employs a 1/2x ERSC stage to reduce the effective dropout voltage of the linear voltage regulator (LVR) while recycling the residual energy back to the input, thereby improving overall efficiency and extending the achievable output voltage range. In addition, an advanced continuous pole-tracking compensation technique is introduced to maintain a stable phase margin across wide output voltage and load current ranges. Measurement results show that the fabricated prototype achieves an output voltage range of 14-19 V, corresponding to a voltage conversion ratio of 2.8–3.8x. The converter attains a peak efficiency of 95%, output voltage recovery times of 240 ns and 280 ns for 220 mA load step-up and step-down events, respectively, and a maximum steady-state output ripple of 10 mV.

24 September 2026 in Electronics
Verified
Journal Article
Open access
PDF file
SLSuYun Lim
SuYun Lim
DSDonghyun Shin
Donghyun Shin
KBKwang-Hyun Baek
Kwang-Hyun Baek
This paper presents an adaptive on-time (AOT) buck converter with a dual-mode zero-current detection (DM-ZCD) scheme for high efficiency over a wide load range. NMOS-switch-based ZCD (ZCD-N) determines whether a transition to discontinuous conduction mode (DCM) is required without periodically activating the freewheeling switch during continuous conduction mode (CCM), and rapidly detects the vicinity of the zero-current crossing (ZCC) during the initial transition from CCM to DCM. The ZCD scheme is then transferred to freewheeling switch-based ZCD (ZCD-F) for accurate ZCC tracking and suppression of switching node ringing in steady-state DCM. During the DCM-to-CCM transition, the absence of a ZCD-F event automatically re-enables ZCD-N circuit. The AOT controller provides near-constant frequency operation in CCM and load-dependent frequency operation in DCM. Dynamic biasing and a subthreshold-biased differential stage reduce control-circuit power consumption and short-circuit current in the comparator output buffer, respectively. Designed in a 0.18-μm CMOS process, the converter operates from a 1.8 V input with a 0.8–1.5 V output and a 10 μA to 700 mA load range. Post-layout simulations predict 98.9% peak efficiency at VOUT = 1.5 V and ILOAD = 10 mA. At a 0.9 V output, peak efficiency is 97.1% and efficiency remains above 90% from 30 μA to 300 mA. The proposed event-based handoff between ZCD schemes enables efficient operation across a wide load range without explicit load current sensing.