The olive mill wastewater (OMW) treatment process is modeled and optimized through new design of experiments (DOE). The first step of the process is coagulation–flocculation using three coagulants (modeled with the mixture design) followed by photo-degradation (modelled with the full factorial design). Based on this methodology, we successfully established a direct correlation between the system’s composition during the coagulation–flocculation step and the conditions of the photo-catalytic degradation step. Three coagulants are used in this study, Fe3+ solution, lime, and cactus juice, and two parameters are considered for the photo-degradation conditions: dilution and catalyst mass. Utilizing a sophisticated quadratic model, the analysis of the two observed responses reveals the ideal parameters for achieving maximum efficiency in coagulation–flocculation and photo-degradation processes. This is attained using a quasi-equal mixture of limewater and cactus juice, exclusively. To achieve an optimal photo-catalytic degradation, it is essential to maintain a minimal dilution rate while employing an elevated concentration of TiO2. It was found that the experimental tests validations were in good concordance with the mathematical predictions (a decolorization of 92.57 ± 0.90% and an organic degradation of 96.19 ± 0.97%).
25 July 2024 in Journal of Sol-Gel Science and Technology
Use of smartphone-based spectroscopy is showing a constant growth since last year. It presents the advantage of being widely available for everyone. The most important thing is that it is still a low-cost method adapted to the education context. However, as all analytical methods, it should be validated to ensure the reliability of its results. In this study, we present the steps of the validation process with its statistical tests applied to the dosage of di-iode. ShapiroWilk test revealed that our method has a random character. Homogeneity of variance analyses using the Cochran test confirmed the precision of the method. The Fisher test revealed the linearity of the model of correlation between I2 concentration and the response. The relation between response and concentration is A=1000C+0.002. From the parameters of the linear regression of the model, we deduced the limits of quantification and XLq=410−5molL−1 and XLd=110−5molL−1. Thanks to tightness of the sample, the method of I2 dosage was successfully applied in iodine quantification to monitor acetone iodination during time in the context of kinetic studies with minimum system trouble. Being low cost, this method can facilitate access to physical methods in educational laboratories.
12 May 2026 in Reaction Kinetics, Mechanisms and Catalysis
Dye-contaminated wastewater poses serious environmental and health risks due to its persistence and toxicity. With growing regulatory pressure and water scarcity, eco-friendly treatment technologie...