Karim Kriaa

Dr. Karim Kriaa

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 December 2023 in Heliyon
Verified
Journal Article
Open access
AAAmir Abbas
Amir Abbas
AHAbid Hussanan
Abid Hussanan
AOAdebowale Martins Obalalu
Adebowale Martins Obalalu
Karim KriaaKarim Kriaa
Karim Kriaa
CMChemseddine Maatki
Chemseddine Maatki
Lioua KolsiLioua Kolsi
Lioua Kolsi
In this work, a novel enhanced model of the thermophysical characteristics of hybrid nanofluid is introduced. An innovative kind of fluid called hybrid nanofluid has been engineered to increase the heat transfer rate of heat and performance of thermal system. A growing trend in scientific and industrial applications pushed researchers to establish mathematical models for non-Newtonian fluids. A parametric study on theheat transfer and fluid flow of a Williamson hybrid nanofluid based on AA7075-AA7072/Methanol overincessantly moving thin needle under the porosity, Lorentz force, and non-uniform heat rise/fallis performed. Due to similarity variables, the partial differential equations governing the studied configuration undergo appropriate transformation to be converted into ordinary differential equations. The rigorous built-in numerical solver in bvp4c MATLAB has been employed to determine the numerical solutions of the established non-linear ordinary differential equations. It is worthy to note that velocity declines for both AA7075/Methanol nanofluid and AA7075- AA7072/Methanol hybrid nanofluid, but highervelocitymagnitudes occur for theAA7075/Methanol whilethe Williamson fluid parameters increased. It is alsoconcluded that as the porosity parameter isincreased, the flow intensity decreases gradually. It is worthy to note that for both non-uniform heat-rise and fall parameters, the temperature of the fluid gets stronger. Mounting valuesof needle thickness parameter leads to reduction in fluid speed and temperature. It is noticedthat as volume fractions of both types of nanoparticles are augmented then fluidvelocity and temperature amplify rapidly. A Comparison of current and published results is performed to ensure the validity of the established numerical model.


20 August 2023 in Processes
Verified
Journal Article
Open access
PDF file
DADalila Akrour
Dalila Akrour
MEMohamed Issam Elkahzen
Mohamed Issam Elkahzen
walid hassenwalid hassen
walid hassen
Karim KriaaKarim Kriaa
Karim Kriaa
CMChemseddine Maatki
Chemseddine Maatki
Lioua KolsiLioua Kolsi
Lioua Kolsi
The present work is a numerical analysis of electro-thermo convection, occurring in a square differentially heated cavity filled with a dielectric fluid. The cavity experiences the combined effects of viscous, electrical, and thermal forces. The equations modelling the physical problem are solved via the finite volume approach. The study focuses on the effect of cavity tilt on the fluid flow structure and thermal performance inside the enclosure under the action of an electric field. A parametric study was performed, where the tilt angle is getting varied between 0° and 90°, as well as the Rayleigh number (5000 ≤ Ra ≤ 250,000) and the electric field (0 ≤ T ≤ 800). Furthermore, the electric charge injection level C, the mobility M and the Prandtl Pr numbers were all adjusted to a value of 10. The obtained results demonstrate that the hydrodynamic and thermal fields are significantly impacted by the cavity inclination. In addition, regardless of the thermal Rayleigh’s number, high electric field values could govern fluid movement through electric forces. Electro-convection typically demonstrates an oscillating flow due to the tilting of the cavity which gives rise to a bicellular regime occupying the entire cavity. A correlation has been established to estimate heat transfer by considering various system parameters such as cavity inclination, electrical Rayleigh number, and thermal Rayleigh number.

18 January 2024 in Water
Verified
Journal Article
Open access
PDF file
FFFatma Fakhfakh
Fatma Fakhfakh
SRSahar Raissi
Sahar Raissi
Karim KriaaKarim Kriaa
Karim Kriaa
CMChemseddine Maatki
Chemseddine Maatki
Lioua KolsiLioua Kolsi
Lioua Kolsi
HBHADRICH Bilel
HADRICH Bilel
The olive mill wastewater (OMW) treatment process is modeled and optimized through new design of experiments (DOE). The first step of the process is coagulation–flocculation using three coagulants (modeled with the mixture design) followed by photo-degradation (modelled with the full factorial design). Based on this methodology, we successfully established a direct correlation between the system’s composition during the coagulation–flocculation step and the conditions of the photo-catalytic degradation step. Three coagulants are used in this study, Fe3+ solution, lime, and cactus juice, and two parameters are considered for the photo-degradation conditions: dilution and catalyst mass. Utilizing a sophisticated quadratic model, the analysis of the two observed responses reveals the ideal parameters for achieving maximum efficiency in coagulation–flocculation and photo-degradation processes. This is attained using a quasi-equal mixture of limewater and cactus juice, exclusively. To achieve an optimal photo-catalytic degradation, it is essential to maintain a minimal dilution rate while employing an elevated concentration of TiO2. It was found that the experimental tests validations were in good concordance with the mathematical predictions (a decolorization of 92.57 ± 0.90% and an organic degradation of 96.19 ± 0.97%).

3 December 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
NENoureddine Elboughdiri
Noureddine Elboughdiri
Karim KriaaKarim Kriaa
Karim Kriaa
MBMutiu Shola Bakare
Mutiu Shola Bakare
AAAbubakar Abdulkarim
Abubakar Abdulkarim
GAGeorge Uwadiegwu Alaneme
George Uwadiegwu Alaneme
CMChemseddine Maatki
Chemseddine Maatki
In the pursuit of sustainable industrial operations, efficient energy management has become a critical challenge, particularly under scenarios where the electrical grid is restricted to serving industrial loads. This study addresses the urgent need for intelligent forecasting and scheduling frameworks by proposing a hybrid Gene Expression Programming Adaptive Neuro-Fuzzy Inference System (GEP-ANFIS) for predictive energy management in hybrid renewable energy systems. The model was evaluated using standard forecasting metrics. For solar PV prediction, GEP-ANFIS achieved low short- and long-term error rates, with MAPE values below 6% and 8%, respectively. For industrial load forecasting, the model exhibited high precision, maintaining MAPE values under 2.5% (short-term) and under 3.5% (long-term). These results demonstrate consistent improvements over conventional ANFIS and GEP models. Economic evaluation confirmed significant cost benefits. In a Grid-only configuration, GEP-ANFIS reduced daily energy costs by 7.4% compared to ANFIS. Greater efficiency was observed in PV and Battery-only and Grid-connected PV-Battery setups, where GEP-ANFIS achieved daily cost reductions of 6.5% and 6.3%, respectively. Over a 20-year planning horizon, the system recorded a 6.5% reduction over ANFIS and a 37.7% improvement over HOMER. A sensitivity analysis was also conducted to assess the robustness of the GEP-ANFIS model under varying solar PV power, and battery storage capacity. Results indicated the robustness, efficiency, and scalability of the GEP-ANFIS controller, especially in resource-constrained, PV-dominated microgrids, making it a strategic solution for sustainable industrial energy management while preserving battery longevity by avoiding deep discharge scenarios.

25 June 2025 in Water
Verified
Journal Article
Open access
PDF file
Mahamadou KamagateMahamadou Kamagate
Mahamadou Kamagate
LTLanciné Traoré
Lanciné Traoré
KBKouadio Aya Nelly Berthe
Kouadio Aya Nelly Berthe
GLGone Droh Lanciné
Gone Droh Lanciné
Karim KriaaKarim Kriaa
Karim Kriaa
HTHICHEM Tahraoui
HICHEM Tahraoui
Heavy metals are a major cause for concern in relation to water systems, due to their high toxicity at elevated levels. The metals can originate from both natural processes, including geological weathering and volcanic activity, as well as anthropogenic activi-ties such as industrial discharges, agricultural runoff, mining, and urbanization, which significantly contribute to water pollution and environmental degradation. The as-sessment of these risks is crucial for protecting public health, especially in populations reliant on contaminated water sources. Exposure to such contaminants can result in severe health consequences, including neurological impairments, organ deterioration, and an elevated risk of cancer. To conduct this assessment study, six surface water sampling sites were selected (i.e., S1 (Gobia), S2 (Kouamefla), S3 (Benkro), S4 (Dou-kouya), S5 (Doka), and S6 (Zengue)) due to their proximity to mining activities. We used the hazard quotient (HQ) and hazard index (HI) methods to estimate the levels of non-carcinogenic health risk associated with heavy metals. Then, the assessment of carcinogenic health risk was carried out using the Incremental Lifetime Cancer Risk (ILCR) methods. First, the highest ILCR total values were observed in the Doya locality (i.e., 0.4237 for the children and 0.5650 for the adults) and during the great dry season (i.e., 0.4333 for the children and 0.5743 for the adults). These findings highlight that populations in this locale experience heightened exposure during the period of the Great Rainy Season. The results indicated that the population exposed to Cd and Hg may experience health concerns irrespective of season and locality. For As and Pb, risks are present in both seasons (i.e., Short Dry Season (SDS) and Short Rainy Season (SRS)). On the other hand, the HIs are well above 1, indicating that the population may be exposed to non-carcinogenic diseases associated with the metals, regardless of the season or locality. To further explore the results, the assessment by ILCR was em-ployed, which demonstrated that for all the designated localities, the ILCRs of As and Cd are well above 10−4 for the entire population, indicating that the population con-suming this water may develop major carcinogenic risks. In addition, the highest ILCR values were obtained for Cd, regardless of the age group. It should be noted that sea-sonal variation had no significant effect on the trend in ILCRs determined for the en-tire population.