The use of particleboards (PB) has increased quickly as an alternative engineered wood product mainly due to its having a better ratio of resistance to weight and more elimination of wood defects, such as the presence of knots. Although the panel industry has been constantly growing, innovations are still necessary to improve the final product. The use of metallic oxide nanoparticles on the wood-based panels has the potential to increase the heat transfer process and improve the physico-mechanical properties. The aim of this work was to evaluate the influence of the addition of zinc oxide (ZnO) nanoparticles in PB, correlating the physical and mechanical properties of the panel with the heat transfer process at 180 °C. The results were compared with the Brazilian standard ABNT NBR 14810-2 (2013) and the European standard EN 312 (2010), as well with works found in literature. The results showed a homogenous heat distribution during the pressing, which improved physical properties, decreasing the 24h swelling from 22.2% to 14.9% and the 24 h absorption from 30.29% to 21.0%. Besides that, MOR values was increased from 11.3 MPa to 14.5 MPa and the MOE from 1880 MPa to 2510 MPa.
The need for more technological products increases with nanomaterials as a viable proposal, presenting good results in many different industrial sectors, especially in wood panels. Particleboards are composites of wood that have been extensively studied, mainly in relation to the adhesives used in their manufacture, which have an influence on particleboard properties. Thus, as a way of improving these adhesives, zinc oxide nanoparticles were added, giving new properties to the particleboard. Thereby, the present work aimed to produce particleboard with the wood of Eucalyptus Urophila x Grandis hybrid and urea-formaldehyde adhesive with ZnO nanoparticles addition. The physical tests performed were density, moisture content, and thickness swelling. The mechanical tests performed were the modulus of elasticity, modulus of rupture, and bonding tests. The results obtained were submitted to statistical analysis and compared with the requirements standards, as well as with works found in the literature. The addition of zinc oxide nanoparticles did not exercise influence on mechanical tests; however, the physical properties were improved, mainly decreasing the thickness swelling, which is usually a problem for wood products.
Particleboards have gained attention in the global market. Understanding their physical–mechanical behavior in the current technological context is essential due to adhesive polymerization, which depends on variables such as pressing time and temperature. Today, the use of nanoparticles has become a plausible option for improving the properties of polymers used in wood-based composites. This study evaluates the influences of the addition of non-commercial 0.5% aluminum oxide (Al2O3) and aluminum oxide copper (CuO) nanoparticles using a greener route with a lower environmental impact obtaining a urea-formaldehyde (UF)-based polymeric adhesive to manufacture particle composites of Eucalyptus urophylla var. grandis wood. Regarding characterizations, the resin properties analyzed were viscosity, gel time, and pH, as well as panel properties, including density, moisture content, thickness swelling, modulus of elasticity, modulus of rupture, and thermal conductivity. The results were compared with scientific publications and standards. The addition of nanoparticles interfered with viscosity, and all treatments indicated a basic pH. It was not possible to determine the gel time after 10 min. Nanoparticles added to the polymers in the internal layer did not cause an improvement in the swelling properties in terms of thickness, with no significant statistical difference for density and moisture content. The increase from 150 °C to 180 °C may have caused an improvement in all physical–mechanical properties, indicating that the higher temperature positively influenced the polymerization of the formaldehyde-based adhesive. Therefore, the additions of both nanoparticles (0.5% in each condition) led to a limitation in the material influence with respect to physical–mechanical performance.
The use of particleboard has currently expanded, mainly due to the need for wood conservation. Therefore, this study aimed to evaluate the physical-mechanical properties and temperature variation of particleboards, by analyzing the addition of 1% ZnO nanoparticles in polyurethane resin based on castor oil, in comparison to particleboard without nanoparticles. The polyurethane resin offers enhanced performance in water contact and is formaldehyde-free, thus making it more sustainable. The properties assessed included density, moisture content, thickness swelling, water absorption, modulus of elasticity, and rupture modulus in static bending, following the specifications of Brazilian (ABNT NBR 14810: 2013), European (EN 312:2010), and American (ANSI 208:2018) standards. Additionally, the analysis included an assessment of pressing temperature variation. The results indicate that the addition of ZnO nanoparticles improved the properties of the particleboard, particularly in wet conditions, which are typically challenging for wood products. These enhancements can be attributed to the improved temperature variation facilitated by the nanoparticles, as observed through temperature analysis. Thus, the incorporation of nanoparticles contributed to the advantages of using a more sustainable resin, leading to advancements in the timber industry.
A grande disponibilidade de recursos florestais existente no Brasil possibilita o crescimento de setores industriais, como o setor de painéis. Novos métodos de produção e tecnologias, como a nanocelulose, surgem como alternativa para melhorar o desempenho dos materiais. Dentre os painéis à base de madeira se destaca o painel compensado, definido como produto composto por lâminas defasadas entre si de 90° visando maior estabilidade dimensional e resistência mecânica em duas direções. Com isso, objetivou-se adicionar nanocelulose ao adesivo poliuretano na produção de painéis compensados. Foram estudadas as propriedades mecânicas de resistência e rigidez na flexão estática na direção paralela às fibras e resistência ao cisalhamento na linha de cola. Os resultados obtidos não diferiram estatisticamente, entretanto uma tendência de melhoramento nas propriedades foi observada com a adição da nanocelulose.