The use of particleboards (PB) has increased quickly as an alternative engineered wood product mainly due to its having a better ratio of resistance to weight and more elimination of wood defects, such as the presence of knots. Although the panel industry has been constantly growing, innovations are still necessary to improve the final product. The use of metallic oxide nanoparticles on the wood-based panels has the potential to increase the heat transfer process and improve the physico-mechanical properties. The aim of this work was to evaluate the influence of the addition of zinc oxide (ZnO) nanoparticles in PB, correlating the physical and mechanical properties of the panel with the heat transfer process at 180 °C. The results were compared with the Brazilian standard ABNT NBR 14810-2 (2013) and the European standard EN 312 (2010), as well with works found in literature. The results showed a homogenous heat distribution during the pressing, which improved physical properties, decreasing the 24h swelling from 22.2% to 14.9% and the 24 h absorption from 30.29% to 21.0%. Besides that, MOR values was increased from 11.3 MPa to 14.5 MPa and the MOE from 1880 MPa to 2510 MPa.
Using Kraft lignin, bio-based adhesives have been increasingly studied to replace those petrochemical-based solutions, due to low cost, easy availability and the potential for biodegradability of this biomaterial. In this study, lignin-based phenol-formaldehyde (LPF) resins were synthesized using commercial Eucalypt Kraft Lignin (EKL), purified at 95%, as a phenol substitute in different proportions of 10%, 20%, 30% and 50%. The properties of bio-based phenol formaldehyde (BPF) synthesized resin were compared with phenol-formaldehyde resin (PF) used for control sampling. The results indicated that viscosity, gel time and solid contents increased with the addition of pure EKL. The shear strength test of glue line was studied according to American Society for Testing and Materials (ASTM), and BPF-based results were superior to samples bonded with the PF as a control sample, being suitable for structural purposes. Changes in the curing behavior of different resins were analyzed by Differential Scanning Calorimetry (DSC), and sample comparison indicated that the curing of the LPF resin occurred at lower temperatures than the PF. The addition of EKL in PF reduced its thermal stability compared to traditional resin formulation, resulting in a lower decomposition temperature and a smaller amount of carbonaceous residues.
Plywood can be used in the furniture industry and in civil construction due to its structural strength. However, for long useful life in construction, especially in tropical countries, it needs to undergo treatments against xylophagous organisms. The most common preservative treatment is the chemical chromated copper arsenate (CCA); there are alternatives, such as heat treatment, that do not use chemicals. The objective of this work was to evaluate the mechanical resistance of CCA and heat-treated plywood prepared at three different temperatures (160 °C, 180 °C, and 200 °C). Pinus taeda plywood with seven veneers and phenol-formaldehyde adhesive was produced and subjected to the preservative treatments. The results showed that the CCA treatment reduced the mechanical strength of the panels, while the heat treatment did not. Heat treatment also decreased panel hygroscopicity, indicating a better dimensional stability.
This study evaluated the physical and mechanical characteristics of particleboards made of bamboo waste from the species Dendrocalamus giganteus bonded with two different types of adhesives: urea-formaldehyde (UF) and a castor oil based adhesive (M). Thus, eight types of particleboards were produced in the proportions of 6%, 8%, 10% and 12% for each adhesive. The results showed that particleboards produced with UF and M adhesives had acceptable behavior for physical tests according to the Brazilian standard NBR 14810. The results attained in mechanical tests (MOR and MOE), for all particleboards, were below the requirements for structural usage. This indicates that the residue of bamboo is a feasible raw material alternative for particleboards produced for non structural purposes, such as liners, partitions and other uses for internal seal. Regarding the adhesives, the particleboards produced with UF particleboards showed superior results for both physical and mechanical characteristics, when compared to M particleboards with the same percentage of adhesive.
The growing popularity of wooden panels renders this market segment increasingly competitive. MDF (Medium Density Fiberboard), in particular, is widely employed for a variety of applications, including civil construction, furniture, and packaging. This paper discusses a study of MDF produced from alternative raw materials, i.e., Eucalyptus fibers and castor-oil-based polyurethane resin. Physical and mechanical tests were performed to determine the MDF's modulus of elasticity and modulus of rupture in static bending tests, its swelling, water absorption, moisture and density. The results of the physical and mechanical characterization of this laboratory-produced MDF are discussed and compared with the Euro MDF Board standard. MDF produced with eucalyptus fiber and castor-oil-based polyurethane resin presents results very satisfactory