Numerous control schemes have been proposed to reach a more efficient power generation using Wells-turbine-based oscillating-water-column power plants. Most of these control strategies aim to avoid the stalling behavior, a feature of the Wells turbine, that limits the generated power. Besides, the plant must be able to maintain its performance despite the input variations due to the intrinsic oscillating nature of the waves and constant climate changes. This paper deals with the modeling and control of the NEREIDA wave power plant installed in the breakwater of Mutriku in the Basque Coast of Spain. In this context, the design of a novel fuzzy gain scheduled proportional integral (FGS-PI) controller is presented to improve the input airflow control. The fuzzy supervisor adequately changes the controller gains to offer the control scheme an adaptive mechanism against input parameter changes. Two study cases were performed to compare the FGS-PI to a conventional PI. The first test is for the output power optimization and the second is to test the robustness against parameter changes. Results show the superior performance of the proposed control providing power generation improvement and higher robustness even with varying input conditions.
15 April 2016 in International Journal of Control, Automation, and Systems
Control engineering in renewable energy systems is a delicate and tedious task, especially due to the unpredictable nature of the renewable resources, which requires precision and robustness. These requirements can be ensured using intelligent control, which provides better performance than many conventional techniques and methods. This paper focuses on the modeling and the intelligent control of the NEREIDA wave power plant of Mutriku in Spain. In this context, the design of two novel intelligent airflow controls for a stalling-free operation of the Wells turbine-based power take-off system is presented and compared. The airflow control will ensure the avoidance of the stalling behavior using an intelligent PID controller. The first control design methodology is based on the metaheuristic algorithms to ensure the optimization of the controller gains. The second methodology is based on the fuzzy gain scheduling of the gains. Two study cases were performed to compare the optimized-PID and FGS-PID to a conventional PID in two wave conditions. The results show the superior performance of both proposed controls over the conventional PID, providing power generation improvement in regular and irregular waves.
28 May 2014 in International Journal of Dynamics and Control
During photovoltaic (PV) conversion in solar panels, a part of the solar radiation is not converted to electricity by the cells, producing heat that could increase their temperature. This increase in temperature deteriorates the performance of the PV panel. In this paper, a hybrid PV/thermal (PV/T) water system is proposed to mitigate this problem. This system combines a PV panel and a thermal collector. In this paper, we focused on the modeling and control of this hybrid system in the linear parameter varying (LPV) framework. An optimal linear quadratic regulator (LQR) is proposed to control the PV cell temperature around an optimal value that maximises electricity generation. Since the system model is nonlinear, an optimal LQR gain-scheduling state-feedback control approach based on an LPV representation of the nonlinear model is designed using the Linear Matrix Inequality (LMI) method. The goal is to obtain the maximum electrical power for each solar panel. Since a reduced number of sensors is available, an LPV Kalman filter is also proposed to estimate the system states required by the state-feedback controller. The obtained results in a laboratory setup in simulation are used to assess the proposed approach, showing promise in terms of control performance of the PV/T system.
The two degree of freedom ball balancing table (BBT) is a well-known didactic tool used to evaluate the effectiveness and performances of many control algorithms for dynamic systems. The present paper proposes to control the ball position of the BBT system via a linear feedback controller based on a functional observer. The parameters of the linear functional observer are determined by applying the direct method which requires neither a Sylvester equation resolution nor canonical transformations. The use of a digital controller has motivated the elaboration of the equations in the discrete time case. In this work, the BBT is tested in real-time to evaluate the proposed controller performances when stabilizing a ball on a reference point. This paper is a continuity of the previous work [12], in which only simulation results have been carried out.