Wind turbine blades are essential parts of wind energy systems and are frequently exposed to harsh environmental elements, such as strong winds, turbulence, and corrosive atmospheric elements. Over time, these circumstances may result in serious harm to blades, such as delamination and erosion, which may negatively affect the wind turbine’s functionality and durability. Accurate prediction of various types of damage is crucial to improve the toughness and lifespan of wind turbine blades and to maximize the overall effectiveness of wind energy systems. This article presents a novel computational fluid dynamics (CFDs)-based method for analyzing the distribution of wall shear stress on turbine blades, aimed at publicizing the yearly maintenance procedure. The investigation results from the CFDs, when compared with the current situation in a wind turbine farm in Thailand, confirmed that our wall shear stress modeling accurately predicted wind turbine damage. A maximum wall shear stress level higher than 5.00 Pa in the case of PA 90°, incoming air velocity 10.00 m/s, and 15 rpm was the main contribution to presenting the erosion and delamination from current drone inspection in wind turbine farms. In conclusion, these findings demonstrated the potential of using CFDs to predict wind turbine blade delamination and erosion, thereby significantly contributing to the development of specific and accurate yearly preventive maintenance. The proposed CFDs-based approach should serve as a sustainability tool for local human development, benefiting wind turbine engineers and operating technicians by providing them with a deeper understanding of the local flow conditions and wall shear stress distribution along wind turbine blades. This enables them to make informed decisions regarding blade design and maintenance.
Preserving heritage sites is a complex challenge that requires multidisciplinary approaches, combining scientific accuracy with cultural and historical sensitivity. In alignment with UNESCO’s conservation guidelines, this study investigated the airflow dynamics and wind-induced structural effects within ancient architecture using advanced computational fluid dynamics (CFD). The study site was the Na Phra Meru Historical Temple in Ayutthaya, Thailand, where the shear stress transport turbulence model was applied to analyze distinctive airflow patterns. A high-precision 3D computational domain was developed using Faro focus laser scanning technology, with the CFD results being validated based on onsite experimental data. The findings provided critical insights into the temple’s ventilation behavior, revealing strong correlations between turbulence characteristics, wind speed, temperature, and relative humidity. Notably, the small slit windows generated complex flow mixing, producing a large internal recirculation zone spanning approximately 70% of the central interior space. In addition to airflow distribution, the study evaluated the aerodynamic forces and rotational moments acting on the structure based on five prevailing wind directions. Based on these results, winds from the east and northeast generated the highest aerodynamic loads and rotational stresses, particularly in the lateral and vertical directions. Overall, the findings highlighted the critical role of airflow and wind-induced forces in the deterioration and long-term stability of heritage buildings. The study demonstrated the value of integrating CFD, environmental data, and structural analysis to bridge the gap between conservation science and engineering practice. Future work will explore further the interactions between wall moisture and the multi-layered pigments in mural paintings to inform preservation practices.
The purpose of this study is to monitor the battery performance of plug-in hybrid electric vehicles (PHEVs) on a chassis dynamometer using the US06, NEDC, and EPA highway driving cycles. The chassis dynamometer simulates vehicle operation and driving conditions and allows for precise simulation of pre-defined driving cycles, including simulations of acceleration, deceleration, stopping, and re-acceleration on the road. In the case of the US06 driving cycle, the results for (EV mode) compared with energy consumption during electric testing revealed a consistent decrease in the SOC (state of charge) due to the rapid response of the electric motor distribution to the changing power, as well as electric power fluctuations during driving conditions. Under the NEDC, the test results for electric power (EV) compared with energy consumption during electric testing revealed that the SOC gradually decreased at the start of the test due to low driving speeds. Towards the end, at around 800 s, an increase in driving speed resulted in a noticeable drop in SOC. The electric power varied during the driving cycle in this test due to the motor’s rapid response to changes in power distribution while driving. For the EPA Highway driving cycle test, the test results for electric power (EV) compared with energy consumption during continuous electric testing indicated a gradual decrease in the SOC at first due to low driving speeds. As the driving speed increased after about 300 s, the SOC rapidly decreased. Because of the motor’s quick response to changes in the power distribution while driving, the electric power varied according to the driving cycle.