Coffee drinks prepared from moldy coffee beans can adversely affect human health. No convenient screening method for detecting the smell of stale coffee beans exists. Accordingly, this study developed an electronic nose (E-nose) system for detecting the smell of coffee beans. This system comprises an environmental control system, a sensor array, and a data signal readout system. The system can distinguish various degrees of mold on coffee beans through the recognition of the smell of the coffee beans. In this study, we established a standard operating procedure to collect gas samples from coffee beans in a temperature- and humidity-controlled environment and recorded changes in the signals by using the sensor array after introducing the target gas. Features were first extracted from the collected data, then dimensionality reduction methods such as principal component analysis (PCA) and linear discriminant analysis (LDA) were applied to these features. Thus, their complexity was reduced, and the noise was eliminated. K-nearest neighbor (KNN) and support vector machine (SVM) were adopted as classification algorithms, and the classification accuracy of the proposed system reached 91.77%.
In this paper, we propose a bio-inspired, two-layer, multiple-walled carbon nanotube (MWCNT)-polypeptide composite sensing device. The MWCNT serves as a responsive and conductive layer, and the nonselective polypeptide (40 mer) coating the top of the MWCNT acts as a filter into which small molecular gases pass. Instead of using selective peptides to sense specific odorants, we propose using nonselective, peptide-based sensors to monitor various types of volatile organic compounds. In this study, depending on gas interaction and molecular sizes, the randomly selected polypeptide enabled the recognition of certain polar volatile chemical vapors, such as amines, and the improved discernment of low-concentration gases. The results of our investigation demonstrated that the polypeptide-coated sensors can detect ammonia at a level of several hundred ppm and barely responded to triethylamine.
This study introduces Sn-substituted higher manganese silicides (MnSi1.75, HMS) synthesized via an arc-melting process followed by spark plasma sintering (SPS). The influences of Sn concentrations on the thermoelectric performance of Mn(Si1−xSnx)1.75 (x = 0, 0.001, 0.005, 0.01, 0.015) are systematically investigated. Our findings reveal that metallic Sn precipitates within the Mn(Si1−xSnx)1.75 matrix at x ≥ 0.005, with a determined solubility limit of approximately x = 0.001. In addition, substituting Si with Sn effectively reduces the lattice thermal conductivity of HMS by introducing point defect scattering. In contrast to the undoped HMS, the lattice thermal conductivity decreases to a minimum value of 2.0 W/mK at 750 K for the Mn(Si0.999Sn0.001)1.75 sample, marking a substantial 47.4% reduction. Consequently, a figure of merit (ZT) value of ~0.31 is attained at 750 K. This considerable enhancement in ZT is primarily attributed to the suppressed lattice thermal conductivity resulting from Sn substitution.