This work focuses on the encapsulation of two organic phase change materials (PCMs), hexadecane and octadecane, through the formation of nanocapsules of the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) obtained by oxidative polymerization in miniemulsion. The energy storage capacity of nanoparticles is studied by preparing polymer films on supporting substrates. The results indicate that the prepared systems can store and later release thermal energy in the form of latent heat efficiently, which is of vital importance to increase the efficiency of future thermoelectric devices.

This study focuses on obtaining lignin-based hydrogels from pruning residues of orange trees in the Safor region (Valencia) using an alkaline extraction method. The structural analysis of the obtained lignin was carried out using Fourier-transform infrared spectroscopy (FTIR), which revealed the characteristic functional groups of lignin, as well as its structural monolignols: syringyl and guaiacyl. The thermal properties were analyzed using differential scanning calorimetry (DSC) and thermogravimetric analysis. The DSC thermogram revealed a relatively low glass transition temperature (T_g) of 67 °C, which may be attributed to partial lignin chain degradation during alkaline extraction. Soda lignin was obtained at 190 °C with an approximate yield of 10.8% relative to the initial biomass and subsequently used to synthesize poly(vinyl alcohol) (PVA)-based hydrogels for ibuprofen encapsulation. Finally, the release experiments of the encapsulated ibuprofen were carried out in an aqueous phosphate buffer medium (pH = 7) at room temperature. A multi-curve response analysis (MCR) algorithm using the Korsmeyer–Peppas (KP) concentration model was used to analyze the release curves, which concluded that the drug and water-soluble lignin fraction (SLF) were released at different rates. For both components, a good correlation was obtained between the measured responses and those provided by the KP model. The release profile indicated that approximately 87% of the initial ibuprofen load was released from the hydrogel within 5 h, highlighting the promising potential of lignin-based hydrogels for drug delivery applications.