Volatile fatty acids (VFAs) are intermediate products in anaerobic digestion. The effect of substrate loading or inoculum to substrate ratio (ISR), the addition of methanogen inhibitor, O₂ presence, control the reactor’s pH, and inoculum adaptation on the VFAs production from food waste through acidogenesis process was investigated in this study. Addition of 2-bromoethane sulfonic (BES) as methanogen inhibitor suppressed VFA consumption by methanogens at ISR 1:1. At higher substrate loading (ISR 1:3), methane production can be suppressed even without the addition of BES. However, at high substrate loading, controlling the pH during acidogenesis is important to achieve high VFAs yield. Acclimatization of inoculum is also one of the strategies to achieve high VFA yield. The highest VFAs yield obtained in this work was 0.8 g VFA/g VS _added at ISR 1:3, controlled pH at 6, with the presence of initial O₂ (headspace unflushed). Graphical Abstract

The attention that high solids anaerobic digestion process (HS-AD) has received over the years, as a waste management and energy recovery process when compared to low solids anaerobic digestion process, can be attributed to its associated benefits including water conservation and smaller digester foot print. However, high solid content of the feedstock involved in the digestion process poses a barrier to the process stability and performance if it is not well managed. In this review, various limitations to effective performance of the HS-AD process, as well as, the possible measures highlighted in various research studies were garnered to serve as a guide for effective industrial application of this technology. A proposed design concept for overcoming substrate and product inhibition thereby improving methane yield and process stability was recommended for optimum performance of the HS-AD process.