In this paper, the experimental methodology for the single-crystal circular plate deformation measurement and subsequent procedure for the quantitation of its mechanical properties are developed. The procedure is based on a new numerical-analytical solution of non-linear boundary-value problem for finite deformations of a circular anisotropic plate. Using the developed method, a study of the deformation of single-crystal circular plates formed on the basis of a silicon-on-insulator structure was carried out. The values of residual stresses are determined and it is shown that the presence of these stresses increases the flexural rigidity of the plate by several times.
26 December 2023 in Vestnik of Samara University. Natural Science Series
The article discusses methods of mathematical modeling of the stress-strain state of a circular disc at various ratios of its thickness to radius, ranging from 1 to 10−3. For sufficiently thick plates, the solution of three-dimensional linear elasticity theory is used, for plates of medium thickness — the solution of linear bending equations within the Kirchhoff – Love hypotheses and nonlinear equations of Foppl – von Karman, and for ultrathin plates — the nonlinear equations of Adkins – Rivlin – Green. A comparative analysis of the solutions has been conducted, and ranges of relative thickness have been identified in which the considered solutions adequately describe the deformation process. This result enables the selection of a method for mathematical modeling of the stress-strain state of circular plates used in microelectromechanical systems that is most suitable for their relative size.
The solution of the non-linear Föppl–von Kármán equations for square plates in the form of expansion over a system of eigenfunctions, generated by a linear self-adjoint operator, is obtained. The coefficients of the expansion are determined via the reduction method from the infinite-dimensional system of cubic equations. This allows the proposed solution to be considered as a non-linear generalization of the classical Galerkin approach. The novelty of the study is in the strict formulation of the auxiliary boundary problem, which makes it possible to take into account a rigid fixation against any displacements along the boundary. To verify the proposed solution, it is compared with experimental data. The latter is obtained by the holographic interferometry of small deflection increments superimposed on the large deflection caused by initial pressure. Experiment and theory show a good agreement.
29 November 2021 in Vestnik of Samara University. Natural Science Series
The present paper develops a general approach to deriving nonlinear equations of motion for solids whose material points possess additional degrees of freedom. The essential characteristic of this approach is theaccount of incompatible deformations that may occur in the body due to distributed defects or in the result of the some kind of process like growth or remodelling. The mathematical formalism is based on least action principle and Noether symmetries. The peculiarity of such formalism is in formal description of reference shape of the body, which in the case of incompatible deformations has to be regarded either as a continual family of shapes or some shape embedded into non-Euclidean space. Although the general approach yields equations for Cosserat-type solids, micromorphic bodies and shells, the latter differ significantly in the formal description of enhanced geometric structures upon which the action integral has to be defined. Detailed discussion of this disparity is given.
10 October 2024 in Vestnik of Samara University. Natural Science Series
The present paper develops an approach to obtaining solutions of the Föppl – von Kármán equations for square plates, which are based on direct algebraisation of the boundary-value problem. The solution is obtained in term of expansion into basis of the space of square-integrable function. The system of eigenfunction of a linear self-adjoined operator is used as the basis. The expansion coefficients are defined by the reduction method from an infinite-dimensional system of cubic equations. It allows one to consider the proposed solution as non-linear generalisation of classic Galerkin method.
The design of thin-walled structures is commonly based on the solutions of linear boundary-value problems, formulated within well-developed theories for elastic plates and shells. However, in modern appliances, especially in MEMS design, it is necessary to take into account non-linear mechanical effects that become decisive for flexible elements. Among the substantial non-linear effects that significantly change the deformation properties of thin plates are the effects of residual stresses caused by the incompatibility of deformations, which inevitably arise during the manufacture of ultrathin elements. The development of new methods of mathematical modeling of residual stresses and incompatible finite deformations in plates is the subject of this paper. To this end, the local unloading hypothesis is used. This makes it possible to define smooth fields of local deformations (inverse implant field) for the mathematical formalization of incompatibility. The main outcomes are field equations, natural boundary conditions and conservation laws, derived from the least action principle and variational symmetries taking account of the implant field. The derivations are carried out in the framework of elasticity theory for simple materials and, in addition, within Cosserat’s theory of a two-dimensional continuum. As illustrative examples, the distributions of incompatible deformations in a circular plate are considered.