Accurate individual-tree segmentation is essential for precision forestry. In previous studies, the canopy height model-based method was convenient to process, but its performance was limited owing to the loss of 3D information, and point-based methods usually had high computational costs. Although some hybrid methods have been proposed to solve the above problems, most canopy height model-based methods are used to detect subdominant trees in one coarse crown and disregard the over-segmentation and accurate segmentation of the crown boundaries. This study introduces a combined approach, tested for the first time, for treetop detection and tree crown segmentation using UAV–LiDAR data. First, a multiscale adaptive local maximum filter was proposed to detect treetops accurately, and a Dalponte region-growing method was introduced to achieve crown delineation. Then, based on the coarse-crown result, the mean-shift voxelization and supervoxel-weighted fuzzy c-means clustering method were used to identify the constrained region of each tree. Finally, accurate individual-tree point clouds were obtained. The experiment was conducted using a synthetic uncrewed aerial vehicle (UAV)–LiDAR dataset with 21 approximately 30 × 30 m plots and an actual UAV–LiDAR dataset. To evaluate the performance of the proposed method, the accuracy of the remotely sensed biophysical observations and retrieval frameworks was determined using the tree location, tree height, and crown area. The results show that the proposed method was efficient and outperformed other existing methods.

Hyperspectral LiDAR (HSL) is a promising active detection technique for underwater positioning and remote sensing, enabling the simultaneous acquisition of three-dimensional topographic and spectral information of underwater targets. This study presents an advanced underwater hyperspectral LiDAR (UDHSL) system with a spectral range of 450–700 nm, adjustable spectral bandwidth of 10–300 nm, and tunable repetition frequency of 50 kHz to 1 MHz. The system achieves high precision with a laser divergence angle of ≤1 mrad, pulse width of 7 ns, laser energy of 7.5 µJ, ranging resolution of 1.13 cm and ranging accuracy of 1.02 m@distance of 27 m. Hyperspectral point clouds spanning 11 bands (450–650 nm) are generated during 3D pool experiments. The distance-colored point clouds precisely align with the geometric characteristics of targets, the normalized intensity-colored point clouds across spectral bands exhibit discriminative capabilities for target identification, and the color-composite point clouds approximate the true colors of targets, collectively validating the system’s ability to concurrently acquire spectral and topographic data. These results underscore the potential of this technology for underwater exploration and positioning applications.

Reflectance anisotropy in remote sensing images can complicate the interpretation of spectral signature, and extracting precise structural information under these pixels is a promising approach. Low-altitude unmanned aerial vehicle (UAV) systems can capture high-resolution imagery even to centimeter-level detail, potentially simplifying the characterization of leaf anisotropic reflectance. We proposed a novel maize point cloud generation method that combines an advanced UAV cross-circling oblique (CCO) photography route with the Structure from the Motion-Multi-View Stereo (SfM-MVS) algorithm. A multi-spectral point cloud was then generated by fusing multi-spectral imagery with the point cloud using a DSM-based approach. The Rahman–Pinty–Verstraete (RPV) model was finally applied to establish maize leaf-level anisotropic reflectance models. Our results indicated a high degree of similarity between measured and estimated maize structural parameters (R² = 0.89 for leaf length and 0.96 for plant height) based on accurate point cloud data obtained from the CCO route. Most data points clustered around the principal plane due to a constant angle between the sun and view vectors, resulting in a limited range of view azimuths. Leaf reflectance anisotropy was characterized by the RPV model with R² ranging from 0.38 to 0.75 for five wavelength bands. These findings hold significant promise for promoting the decoupling of plant structural information and leaf optical characteristics within remote sensing data.