To reduce the draught force of a traditional planar potato digging shovel (DZ), a biomimetic potato digging shovel (YS), inspired by the mole rat’s digits, is designed, using the biomimetic macroscopic surface modification method. The finite element simulations, soil bin experiments, and field experiments for DZ and YS are conducted to explore the factors affecting draught force and to verify the feasibility and effectiveness of the biomimetic potato digging shovel. Results show that the soil–shovel interaction models predict the draught force well, but the simulations for the soil rupture distance ratio need to be further improved. The studied factors all have a great influence on the draught force of DZ and YS and they follow the order of cutting speed > digging depth > mounting angle. For the single shovels, YS, compared with DZ, increases the draught force at a low mounting angle but decreases the draught force by over 8.41% when the mounting angle is higher than 30°; for the grouped shovels, the draught force and fuel consumption of YS, compared with those of DZ, decline by over 13.33% and 9.18%, respectively. The reasons for the reduction in the draught force of YS are to make the soil mass tend to move upward and to change the soil’s state of motion and stress continually; thus, the compaction to the soil is reduced, and the soil becomes easier to be broken.

One of the primary challenges in developing bone substitutes is to create scaffolds with mechanical properties that closely mimic those of regenerated tissue. Scaffolds that mimic the structure of natural cancellous bone are believed to have better environmental adaptability. In this study, we used the porosity and thickness of pig cancellous bone as biomimetic design parameters, and porosity and structural shape as differential indicators, to design a biomimetic bone beam scaffold. The mechanical properties of the designed bone beam model were tested using the finite element method (FEM). PCL/β-TCP porous scaffolds were prepared using the FDM method, and their mechanical properties were tested. The FEM simulation results were compared and validated, and the effects of porosity and pore shape on the mechanical properties were analyzed. The results of this study indicate that the PCL/β-TCP scaffold, prepared using FDM 3D printing technology for cancellous bone tissue engineering, has excellent integrity and stability. Predicting the structural stability using FEM is effective. The triangle pore structure has the most stability in both simulations and tests, followed by the rectangle and honeycomb shapes, and the diamond structure has the worst stability. Therefore, adjusting the porosity and pore shape can change the mechanical properties of the composite scaffold to meet the mechanical requirements of customized tissue engineering.

Soil-engaging components play a critical role in agricultural production and engineering construction. However, the soil-engaging components directly interacting with the soil often suffer from the problems of high resistance, adhesion, and wear, which significantly reduce the efficiency and quality of soil operations. A large number of featured studies on the design of soil-engaging components have been carried out while applying the principles of bionics extensively, and significant research results have been achieved. This review conducts a comprehensive literature survey on the application of biomimetics in the design of soil-engaging components. The focus is on performance optimization in regard to the following three aspects: draught reduction, anti-adhesion, and wear resistance. The mechanisms of various biomimetic soil-engaging components are systematically explained. Based on the literature analysis and biomimetic research, future trends in the development of biomimetic soil-engaging components are discussed from both the mechanism and application perspectives. This research is expected to provide new insights and inspiration for addressing related scientific and engineering challenges.

Under the conditions of conservation tillage, the existence of the root–soil complex greatly increases the resistance and energy consumption of stubble-cutting blades, especially in Northeast China. In this research, the corn root–soil complex in Northeast China was selected as the research object. Based on the multi-toothed structure of the leaf-cutting ant’s mandibles and the unique bite mode of its mandibles on leaves, a gear-tooth, double-disk, bionic stubble-cutting device (BSCD) was developed by using a combination of power cutting and passive cutting. The effects of rotary speed, tillage depth, and forward speed on the torque and power of the BSCD were analyzed using orthogonal tests, and the results showed that all of the factors had a large influence on the torque and power, in the order of tillage depth > rotary speed > forward speed. The performance of the BSCD and the traditional power straight blade (TPSB) was explored using comparative tests. It was found that the optimal stubble-cutting rate of the BSCD was 97.4%. Compared with the TPSB, the torque of the BSCD was reduced by 15.2–16.4%, and the power was reduced by 9.2–11.3%. The excellent performance of the BSCD was due to the multi-toothed structure of the cutting edge and the cutting mode.

Overcoming high draft forces has long been a primary challenge in conventional subsoiling. To better utilize this agronomically advantageous technique, it is necessary to substantially reduce the draft. Inspired by the digging behaviors of fossorial animals, a low-draft up-cutting subsoiling method was proposed in this study. Discrete element method (DEM) simulations were employed to study the draft-reducing performance of up-cutting tools compared with regular tools. The results showed that the up-cutting motion reduced the draft by 63.07%, 63.84%, and 58.92%, respectively, at rake angles of 45°, 60°, and 75%, and by 79.73%, 63.84%, and 45.22%, respectively, at advancement velocities of 0.5 m·s⁻¹, 1 m·s⁻¹, and 1.5 m·s⁻¹. An increase in up-cutting velocity reduces the draft. Soil disturbance, particle velocity distribution, and soil deformation and movement patterns change in ways that contribute to this reduction. The draft-reducing performance of a chain subsoiler developed based on the principle of soil-breaking by animal digging was verified using field tests, exhibiting a draft-reduction amplitude approaching or greater than 30%. This study shows the great application potential of the up-cutting method in reducing subsoiling drafts and provides a theoretical basis for future research.

High wear rates during the tillage process often result in significant financial losses and wasted farming seasons. In this paper, a bionic design was used to reduce tillage wear. Inspired by wear-resistant animals with ribbed structures, the bionic ribbed sweep (BRS) was designed by combining a ribbed unit with a conventional sweep (CS). BRSs with different parameters (width φ, height h, angle θ, and interval λ) were simulated and optimized using the DEM and RSM methods at a working depth of 60 mm to evaluate the magnitude and trends of three responses: tillage resistance (TR), number of contacts between the sweep and soil particles (CNSP), and Archard wear value (AW). The results showed that a protective layer could be created on the surface of the sweep with a ribbed structure to reduce abrasive wear. Analysis of variance proved that factors φ, θ, and λ had significant effects on AW, CNSP, and TR, while factor h was insignificant. An optimal solution was obtained using the desirability method, including 8.88 mm φ, 1.05 mm h, 3.01 mm λ, and 34.46° θ. Wear tests and simulations showed that wear loss could be effectively reduced at different speeds by the optimized BRS. It was found to be feasible to create a protective layer to reduce partial wear by optimizing the parameters of the ribbed unit.