This research introduces an innovative construction method based on magnesia expansive agent concrete for the seamless construction of hundred-meter scale super-length raft structures, corroborated by the on-site test. The basic principle of this construction method is to use the pre compression stress generated by magnesia expansive agent to offset temperature and shrinkage stress. A temperature-strain monitoring system was employed to gather data, affirming the technique’s applicability and safety. Through the examination of temperature and strain dispersion trends in super-length raft structure, recommendations for the configuration of temperature-strain sensors have been put forth. Through the scrutiny of the temporal evolution pattern of temperature, the specific temporal and spatial coordinates that warrant particular vigilance during the surveillance of the raft’s inner-surface temperature difference were identified. Upon evaluating the correlation between strain dispersion and strain-temperature differential in the raft’s thickness dimension, a novel temperature control index (the bottom-surface temperature difference) was introduced. The threshold for this metric was established at 30°C, derived from empirical test outcomes conducted on-site. Furthermore, the critical regions for monitoring the bottom-surface temperature difference were specified.
To address the problems of easy cracking and the difficulty in balancing construction schedule and structural quality in the construction of ultra-long concrete slabs, this paper takes the ultra-long floor slab project of an inpatient building in the Science City Campus of Chongqing University Cancer Hospital as the research object, and conducts research on temperature and crack control in the construction of the alternative bay method. The key structural mechanical parameters are determined through theoretical calculation. The temperature and deformation changes during the whole process of concrete pouring are tracked by combining on-site monitoring and finite element simulation, and the effects of different construction parameters are compared and analyzed. The results show that when the alternative bay method is adopted, the overall temperature distribution of the floor slab is uniform, and there are obvious differences in deformation at different positions. The center of the first-poured slab has smaller deformation, the beam side has larger deformation, the later-poured slab has larger overall deformation, and tensile deformation occurs on both sides of the construction joint. Reasonably dividing the pouring blocks, optimizing the pouring sequence and extending the pouring interval can significantly reduce the tensile deformation of concrete and alleviate stress concentration. This study confirms that the alternative bay method can effectively reduce the risk of temperature-induced cracking in ultra-long floor slabs and provide technical reference for seamless construction of similar above-ground structures.
The drive for continuous innovation in large-scale infrastructure necessitates advancements in techniques, addressing the challenges of constructing super-length concrete structures. This study investigated the emerging shift from traditional united expanding agent (UEA) to magnesia expansive agent (MEA) in conjunction with expansive strengthening bands (ESBs), marking a pivotal transition in ensuring monolithic integrity. Despite a decade of exploration, MEA–ESB implementation in real-world projects remains underdocumented, with scholarly focus primarily confined to material characterization. This research integrated empirical on-site tests of MEA–ESB with high-fidelity numerical simulations in ABAQUS. The finite element model (FEM) validation against actual test data underscored the precision of our modeling, capturing the complex thermomechanical behavior of the system. We introduced a sophisticated parametric analysis framework, elucidating the influence of critical parameters like the ESB-to-raft-width ratio and MEA concrete expansion rates. This granular understanding facilitated the fine-tuning of design parameters, advancing the practical application of MEA methodologies. A groundbreaking contribution entailed the formulation of predictive models for early-stage cracking, anchored in the guidelines of the ACI Committee 207 and refined through extensive parametric exploration. These formulae empower engineers to anticipate and mitigate cracking risks during the design phase, thereby enhancing project safety and efficiency. Notably, this study identified limitations in current prediction models, highlighting the need for future research to incorporate comprehensive lifecycle considerations, including hydration heat effects and time-dependent mechanical property evolution.