Background: The sustainability of crop production is impacted by climate change and land degradation, and the advanced application of nanotechnology is of paramount importance to overcome this challenge. The development of nanomaterials based on essential nutrients like zinc could serve as a basis for nanofertilizers and nanocomposite synthesis for broader agricultural applications and quality human nutrition. Therefore, this study aimed to synthesize zinc oxide nanoparticles (ZnO NPs) using pecan (Carya illinoinensis) leaf extract and investigate their effect on the growth, physiology, nutrient content, and antioxidant properties of mustard (Brassica juncea).Methods: The ZnO NPs were characterized by UV-Vis spectrophotometry, Dynamic Light Scattering (DLS), X-ray diffractometer (XRD), Scanning Electron Microscopy (SEM), and Fourier Transform Infra-Red Spectroscopy (FTIR). Mustard plants were subjected to different concentrations of ZnONPs (0, 20, 40, 60, 80, 100 and 200 mg L-1) during the vegetative growth stage.Results: The UV-Vis spectra of ZnO NPs revealed the absorption maxima at 362 nm and FTIR identified numerous functional groups that are responsible for capping and stabilizing ZnO NPs. DLS analysis presented monodispersed ZnO NPs of 84.5 nm size and highly negative zeta potential (-22.4 mV). Overall, the application of ZnO NPs enhanced the growth, chlorophyll content (by 53 %), relative water content (by 46 %), shoot biomass, membrane stability (by 54 %) and net photosynthesis significantly in a dose-dependent manner. In addition, the supplement of the ZnO NPs augmented K, Fe, Zn and flavonoid contents as well as overcome the effect of reactive oxygen species by increasing antioxidant capacity in mustard leaves up to 97 %.Conclusions: In conclusion, ZnO NPs can be potentially used as a plant growth stimulant and as a novel soil amendment for enhancing crop yields. Besides, the biofortification of B. juncea plants with ZnO NPs helps to improve the nutritional quality of the crop and perhaps potentiates its pharmaceutical effects.

Industrial hemp (Cannabis sativa L.) is identified as a leading fibre crop and there is increasing interest in C. sativa fibre due to its new range of industrial applications. However, the complexity of hemp germplasm resulted in insufficient information on the effect of genotypes on fibre quality and quantity. In this study, 16 fibre and non-fibre type hemp genotypes were evaluated to compare the morpho-anatomical differences of stems and physico-mechanical fibre properties under three retting methods and to understand the effect of stem colour on the properties of hemp fibres. Morphological markers were scored and stem anatomy was examined using live and herbarium collections. Stems were retted using chemical, enzymatic, and microbiological methods. The resulting fibres were tested for tensile strength, moisture retention, colour, bast and hurd dry weights. Hemp genotypes showed morphological variations that affect fibre processing and a unique pattern of fibre wedges in cross-sections of the basal internode. Fibre yield, tensile strength, colour, and moisture retention significantly varied among the genotypes. The hemp collection used in this study formed three clusters in principal component analysis and traits such as internodal length, node number, hurd yield, and tensile strength highly contributed to the total variability. Additionally, non-fibre type hemp genotypes that showed important fibre properties were identified. The hemp genotypes that were selected based on our approaches can be tailored towards the specificities of the end-usage of choice. Our methods will enable the exploration of hemp genetic diversity pertaining to fibre properties and contribute to the preliminary identification of genotypes as a supplement to genetic analyses.

With the ongoing climate change scenario and alarmingly increased land degradation, understanding complex interactions of drought stress and organic fertilizers on morpho-physiological traits and dynamics of nutrient concentration is pivotal for sustainable production leafy vegetables such as mustard (Brassica juncea). Thus, this study evaluated the effect of drought stress and organic fertilizers on B. juncea growth, physiology, and dynamics of nutrient concentration at the vegetative stage. The plants were exposed to three water stress levels (well-watered (100% field capacity, FC), mild (50% FC), and severe (25% FC) supplemented with three organic fertilizers (chitosan, ultra green, and home-grown natural vegetable foods) either individually or in combination during the vegetative growth stage. Water stress had a negative effect on growth and physiological traits, and macro- and micronutrients of mustard. However, the ameliorative effects of fertilizer application were revealed by improved plant height, leaf area, relative water content, membrane stability index, and chlorophyll content from 9.7% to 26.9%, 28% to 32.72%, 7.97% to 39.51%, 7.93% to 39.66%, and 29.68% to 56.53%, respectively. Analysis of variance revealed a significant effect of soil moisture level, fertilizer type and their interaction on content of macronutrients (Ca, K, P, N, C, S, Na, Mg) and micronutrients (Fe, Zn) in mustard leaves. However, there was no significant effect detected for Cu across all factors as well the interaction effect on Mn. Overall, our results indicated that application of organic fertilizers enables mustard plant to withstand the deleterious effect of drought stress, resulting in improved growth and physiological traits as well as leaf nutrient content.

Germination is a complex physiological and biochemical process influenced by various factors, including metabolic activation and antioxidant defense mechanisms. This study investigated the effects of zinc oxide nanoparticles (ZnO NPs) of different sizes (ZnO₁₀ and ZnO₃₅) as seed priming agents on the germination, biochemical traits, and antioxidative systems of Amaranthus tricolor seeds. ZnO NPs were characterized by UV-Vis maximum peaks at 352 nm and 364 nm and average sizes of 10.0 nm and 35.2 nm for ZnO₁₀ and ZnO₃₅, respectively. Additionally, zeta potential indicated high stability, while transmission electron microscopy confirmed spherical morphology, energy dispersive X-ray showed high purity, and X-ray diffraction peaks indicated crystallinity. Germination percentage (GP) and germination rate (GR) were significantly improved by ZnO NP treatments, particularly at 400 mg/L, with ZnO₁₀-primed seeds achieving 100% GP compared to 91.5% in ZnO₃₅-primed seeds. Additionally, seedling vigor indices followed a similar trend, with ZnO₁₀-primed seeds showing the highest vigor (2380) compared to ZnO₃₅-primed seeds (1793.4). ZnO NPs significantly enhanced water uptake, with ZnO₁₀ NPs demonstrating superior absorption at increasing concentrations, reaching a maximum of 93.6% at 400 mg/L. The α-amylase activity was also significantly higher in ZnO₁₀-primed seeds (1.9 mg/g) than ZnO₃₅-primed seeds (0.81 mg/g) at 400 mg/L suggesting enhanced enzymatic activation and metabolic efficiency. Antioxidant enzyme activities, including superoxide dismutase, catalase, peroxidase, ascorbate peroxidase, and glutathione peroxidase, were significantly enhanced in ZnO NP-primed seedlings, indicating improved oxidative stress management. Furthermore, lipid peroxidation, measured as malondialdehyde content, was significantly reduced, with ZnO₁₀ NPs demonstrating an 89.3% reduction at 400 mg/L. The non-enzymatic antioxidant response was also enhanced, with total phenolic content and total flavonoid content significantly increased in ZnO NP-treated seedlings. The findings show that smaller-sized ZnO₁₀ NPs enhance seed germination, biochemical activation, and antioxidative defense, improving seedling establishment. The high surface area of NPs enhances seed interaction and water uptake, and stimulates enzymatic activities, ultimately improving metabolic activation and protection against oxidative stress. ZnO NPs demonstrate strong potential as effective priming agents for A. tricolor.

Developing multifunctional nanomaterials through environmentally friendly and efficient approaches is a pivotal focus in nanotechnology. This study aimed to employ a biogenic method to synthesize multifunctional copper oxide nanoparticles (LI-CuO NPs) with diverse capabilities, including antibacterial, antioxidant, and seed priming properties, as well as photocatalytic organic dye degradation and wastewater treatment potentials using Lagerstroemia indica leaf extract. The synthesized LI-CuO NPs were extensively characterized using UV–vis spectroscopy, dynamic light scattering (DLS), X-ray diffraction (XRD), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and Fourier transform-infrared spectroscopy (FT-IR). The colloid displayed surface plasmon resonance peaks at 320 nm, characteristic of LI-CuO NPs. DLS analysis revealed an average particle size of 93.5 nm and a negative zeta potential of −20.3 mV. FTIR and XPS analyses demonstrated that LI-CuO NPs possessed abundant functional groups that acted as stabilizing agents. XRD analysis indicated pure crystalline and spherical LI-CuO NPs measuring 36 nm in size. Antibacterial tests exhibited significant differential activity of LI-CuO NPs against both gram-negative (Escherichia coli, Salmonella typhimurium) and gram-positive (Staphylococcus aureus and Listeria monocytogenes) bacteria. In antioxidant tests, the LI-CuO NPs demonstrated a remarkable radical scavenging activity of 97.6 % at a concentration of 400 μg mL⁻¹. These nanoparticles were also found to enhance mustard seed germination at low concentrations. With a remarkable reusability, LI-CuO NPs exhibited excellent photocatalytic performance, with a degradation efficiency of 97.6 % at 150 μg/mL as well as a 95.6 % reduction in turbidity when applied to wastewater treatment. In conclusion, this study presents environmentally friendly method for the facile synthesis of LI-CuO NPs that could potentially offer promising applications in biomedicine, agriculture, and environmental remediation due to their multifunctional properties.

In the face of evolving healthcare challenges, the utilization of silver nanoparticles (AgNPs) has emerged as a compelling solution due to their unique properties and versatile applications. The aim of this study was the synthesis and characterization of novel AgNPs (SB-AgNPs and SG-AgNPs, respectively) using Salvia blepharophylla and Salvia greggii leaf extracts and the evaluation of their antimicrobial, antioxidant, and antidiabetic activities. Several analytical instrumental techniques were utilized for the characterization of SB-AgNPs and SG-AgNPs, including UV–visible (UV-Vis) spectroscopy, transmission electron microscopy (TEM), dynamic light scattering (DLS), Fourier transmission infrared (FT-IR) spectroscopy, energy-dispersive X-ray analysis (EDX), and X-ray diffraction (XRD). FTIR analysis identified various functional groups in the leaf extracts and nanoparticles, suggesting the involvement of phytochemicals as reducing and stabilizing agents. High-resolution TEM images displayed predominantly spherical nanoparticles with average sizes of 52.4 nm for SB-AgNPs and 62.5 nm for SG-AgNPs. Both SB-AgNPs and SG-AgNPs demonstrated remarkable antimicrobial activity against Gram-positive bacteria Staphylococcus aureus and Listeria monocytogenes and Gram-negative bacteria Salmonella typhimurium and Escherichia coli. SB-AgNPs and SG-AgNPs also exhibited 90.2 ± 1.34% and 89.5 ± 1.5% DPPH scavenging and 86.5 ± 1.7% and 80.5 ± 1.2% α-amylase inhibition, respectively, at a concentration of 100 μg mL⁻¹. Overall, AgNPs synthesized using S. blepharophylla and Salvia greggii leaf extracts may serve as potential candidates for antibacterial, antioxidant, and antidiabetic agents. Consequently, this study provides viable solutions to mitigate the current crisis of antibiotic resistance and to efficiently combat antimicrobial infections and Type 2 diabetes.