Fused deposition modeling (FDM) is widely employed in prototyping due to its cost-effectiveness, speed, and ability to produce detailed and functional prototypes using a variety of materials. Simultaneously, consideration for the use of biodegradable polymers and a general reduction in their usage while enhancing the production of polymer-based products is at the forefront of sustainable practices and environmental consciousness. This study investigates the impact fracture resistance of FDM models fabricated from Polylactic Acid (PLA), examining the influence of infill density (50% and 100% infill) and sample thickness (2 mm, 3 mm, and 5 mm). Optical microscopy, FTIR spectroscopy, and SEM analysis of PLA filament and fractured FDM PLA surfaces in impacted samples were conducted to ascertain the influence of process parameters on impact damage and failure mechanisms. The results indicate that a 100% infill profile with a 2 mm thickness should be avoided due to unpredictable behavior under impact. Conversely, a 5 mm thickness demonstrates significantly higher durability in comparison to a 50% infill profile. Optimal impact strength is observed in samples with a 3 mm thickness, suggesting potential material savings with 50% infill without compromising mechanical properties. The findings contribute valuable insights for refining FDM parameters and advancing the understanding of material behaviors in sustainable manufacturing practices.

Three-dimensional information visualizations are widely used in various fields for their aesthetic appeal. However, using them can sometimes lead to occlusion and distortion, which raises questions about when and why to use them. In this study, we aimed to investigate the effects of three-dimensional visualizations on human gaze and user understanding and analyze the perception process in detail. Our empirical research consisted of a two-part experimental study that involved both subjective and objective evaluation. We specifically focused on bar charts as they are among the most frequently used types of information visualizations. The results suggest that, for bar chart visualizations with varying gap dimensions, there is no statistically significant difference in user understanding between the two-dimensional and three-dimensional versions. Our findings indicate that, in general, three-dimensional bar chart visualizations are as comprehensible as their two-dimensional counterparts for the gap dimensions examined in this research. This study provides empirical insights demonstrating that both 3D and 2D bar charts are equally understandable, particularly when a specific gap depth is used in 3D visualizations. These findings contribute to the ongoing discussion about the effective use of three-dimensional visualizations and highlight areas for further research.

The Elmendorf method is a well-known test that provides valuable insight into the durability and lifespan characteristics of the observed material, i.e., paper or paperboard. The objective of this paper is to determine if it is possible to apply the...