The prediction of unstart boundaries of hypersonic inlets is significant to the engine control. To correct the previous conclusions based on the one-dimensional and inviscid flow assumption, the present paper numerically investigates the unstart characteristics of two-dimensional contraction ducts in viscous flow that vary with multiple controlling variables. Based on the newly defined dimensionless cowl length and effective internal contraction ratio, the similarity law of unstart is discovered. The universal empirical equation of unstart boundary for different cowl lengths, cowl lip heights, entrance boundary-layer thicknesses, unit Reynolds numbers, and Mach numbers is proposed, which can simplify the design of two-dimensional hypersonic inlets. With varying the dimensionless cowl length, three different types of short-cowl, transitional, and long-cowl unstarts are identified, owing to the different evolution mechanisms of separation region. The unstart displays a separation region growing under the streamwise pressure difference enhanced by the shock system or flow choke. In addition, the wall pressure criteria for unstart are correlated to the characteristic separation scale at unstart critical state and the dimensionless cowl length, which facilitates the unstart detection or early warning. It is observed that the Kantrowitz limit is close to the unstart boundaries for very short cowl and the isentropic limit is close to the unstart boundaries for very long cowl.
Understanding the hypersonic inlet starting characteristics is the prerequisite for avoiding the abnormal unstart state. To make the work close to the actual situation, an experimental study was performed on a scramjet model at a simulated freestream Mach number of 6.0 with pressure and thrust measurements. The inlet working status is determined by the heat release of the injected ethylene with reciprocating variations. The results show that the critical equivalence ratio of the restart state is lower than that of the unstart state, which means that the combustion weakens the inlet restart capability and raises the unstart/restart hysteresis phenomena. Specifically, two novel unstart/restart hysteresis phenomena are found: one may come from the dual-solution characteristics of the shock–combustion interaction and the other may come from the historical effect of reverse flow. Compared to the former type, the latter type requires greater downstream heat release and generates a larger hysteresis loop. In addition, the engine thrust characteristics of the whole unstart and restart processes are analyzed. The thrust increment in the shock–combustion interaction type exhibits nearly linearly. However, the thrust increment meets abrupt changes and strong oscillations in the reverse flow type, accompanied by the reverse flow's formation and disappearance, making the engine more difficult to restart.
To study an abrupt phenomenon of a scramjet in the Mach-number variation process, a scramjet model was tested in the simulated acceleration and deceleration conditions between the flight Mach numbe...
Separation-induced shock reflections in straight ducts are generally considered asymmetric for Mach numbers beyond 2.2, but our experiment shows that this is not always the case. A symmetric shock pattern, a proven outcome of following the free-interaction theory (FIT), is observed to appear in an oscillatory duct flow at a Mach number of 2.47. Interestingly, its existence is restricted to the period when the shocks move forward. Once a full retreat starts, it changes suddenly into an utterly asymmetric style that conforms to the past observation. This behavior indicates that the FIT fundamentally plays a limited role in supersonic duct flows.