The current analysis of cascading failures in command and control networks pays little attention to their roles and mechanisms, resulting in challenges in quantifying survivability evaluation metrics and limiting practical application. To address these issues, this paper designs a command and control network model with a recovery strategy to improve the scientific evaluation of critical nodes and enhance the reliability of subsequent cascading failure simulations. Two capacity parameters are introduced to analyze the nonlinear behavior between network node load and capacity, and an optimal recovery strategy is proposed. This strategy prioritizes the recovery of critical nodes, thereby minimizing the overall probability of network failure. Simulations were conducted under both random failure and deliberate attack scenarios, comparing the proposed strategy with random recovery and betweenness-priority recovery strategies to identify the optimal recovery approach. The experiments showed that the optimal recovery strategy significantly enhanced the network’s survivability and recovery efficiency, allowing for the restoration of basic network functions in the shortest possible time and reducing the impact of cascading failures. By integrating the operability and uncertainty of real-world command and control networks, this method improved the network’s recovery capability and overall stability in the face of cascading failures through scientific evaluation and strategy optimization.

This paper has designed a four-channel wide dynamic microwave rectifier circuit for the shortcomings of uneven output voltage of each branch of the multi-channel rectification technology. A voltage-doubling rectifier circuit with identical structure was used in each branch. The four rectifier branches shared the same load at the output terminal, allowing the rectifier circuit to have an RF-DC conversion efficiency greater than 50% over the input power range from 12mW to 274mW, widened by 274% compared to a single channel. Not only the advantages of multi-channel technology with wide dynamics were retained, but also the output voltage was highly consistent and could be directly output in parallel without complex power electronics conversion.

Based on the different behaviors of multi-user group, this paper gives a method of demand analysis of broadband wireless mobile application. The analysis of broadband wireless mobile application, based on user behavior samples, can adopt the method of fuzzy cluster analysis to classify the user behavior by setting different clustering level, and build the model of each type of user behavior. The function of broadband wireless mobile application is designed by using the function description template based on class diagram, and the relationship between its function and user group behavior is analyzed by mapping matrix. At last, based on the application function and user behavior correlation analysis, the user behaviors are transformed into the key indicators and requirements of the application function.