Drying in fluidized beds is an important step in the production of powdered materials. Especially in the food and pharmaceutical industry, fluidized bed dryers are often vibrated to improve the drying process. In the current work, a continuous fluidized bed drying model is implemented in the novel, open-source flowsheet simulation framework Dyssol. The new model accounts for the hydrodynamic characteristics of all Geldart groups as well as the impact of mechanical vibration on the drying process. Distributed particle properties are considered by the model. Comprehensive validation of the model was conducted for a wide range of process parameters, different materials, dryer geometries and dimensions as well as the impact of vibration. Particle properties are predicted accurately and represent the broad experimental data well. A sensitivity analysis of the model confirmed grid independence and the validity of underlying model assumptions.
The production of catalysts such as zeolites is a complex multiscale and multi-step process. Various material properties, such as particle size or moisture content, as well as operating parameters—e.g., temperature or amount and composition of input material flows—significantly affect the outcome of each process step, and hence determine the properties of the final product. Therefore, the design and optimization of such processes is a complex task, which can be greatly facilitated with the help of numerical simulations. This contribution presents a modeling framework for the dynamic flowsheet simulation of a zeolite production sequence consisting of four stages: precipitation in a batch reactor; concentration and washing in a block of centrifuges; formation of droplets and drying in a spray dryer; and burning organic residues in a chain of rotary kilns. Various techniques and methods were used to develop the applied models. For the synthesis in the reactor, a multistage strategy was used, comprising discrete element method simulations, data-driven surrogate modeling, and population balance modeling. The concentration and washing stage consisted of several multicompartment decanter centrifuges alternating with water mixers. The drying is described by a co–current spray dryer model developed by applying a two-dimensional population balance approach. For the rotary kilns, a multi-compartment model was used, which describes the gas–solid reaction in the counter–current solids and gas flows.
Freeze-drying is generally used to achieve high quality products and preserve thermal sensitive components; however, it is also considered as a high energy and costly process. Modeling of the process can help to optimize the process to reduce these drawbacks. In this work, a mathematical model is presented to predict the heat and mass transfer behavior for freeze-drying of porous frozen food particles during freeze-drying to optimize the process. For the mass transfer, a comparison between Knudsen diffusion and the more complex dusty-gas approach is performed. Simulation results of a single particle are validated by experiments of single-layer drying to extend the usage of this model from a single particle to a particle bed. For the moisture transfer, adaption parameters are introduced and evaluated. A comparison shows a good agreement of the model with experimental results. The results furthermore suggest a strong correlation of the drying kinetics with pore size and particle porosity. An increase in the pore diameter strongly improves the overall mass transfer rates and hence is a suitable parameter for an effective increase of the drying rates in freeze-drying.
Multistage drying processes including spray drying and fluidized bed unit operations are challenging to design due to the dependencies of the preceding process steps. Flowsheet simulation offers the possibility to simulate a complete process by the application of suitable short‐cut models. In this contribution a novel model for a spray dryer based on a population balance approach is presented. Furthermore, a dynamic model for a fluidized bed dryer is introduced. Experimental data is used for validation and parameter optimization. The calibrated models are then used to design an industrial drying process of multiple drying stages.
With increasing computational capacities and advances in numerical methods, a simulation-based process and product design approach for spray dried products has become the focus of many researchers. In this context, a novel unresolved CFD-DEM simulation approach for single suspension droplets is presented, which models the drying and solidification process in a hot gas environment. The solidification process is described by the formation of bonds between the primary particles in the suspension droplet, showing a plausible solidification behavior, which starts when a critical solid concentration is reached at the droplet surface. The drying conditions for the single-droplet simulations are determined from a large-scale spray dryer simulation for different droplet size classes. The resulting solid particles from the CFD-DEM simulation show a higher tendency to form hollow particles at high drying rates when the locking point is reached at earlier stages of the drying process. Using these results, suitable operating conditions for the spray dryer can be determined, which favor the formation of particles with a targeted morphology.