Engineers continue to be concerned about electrical discharge-machined components’ high energy consumption, machining debris, and poor dimensional precision. The aim of this research is to propose a hybrid neuro-genetic approach to improve the machinability of the electrical discharge machining (EDM) of the Nimonic C263 superalloy. This approach focuses on reducing the energy consumption and negative environmental impacts. The material removal rate (MRR), electrode wear ratio (EWR), specific energy consumption (SEC), surface roughness (Ra), machining debris (db), and circularity (C) are examined as a function of machining parameters such as the voltage (V), pulse on time (Ton), current (I), duty factor (τ), and electrode type. By employing the VIKOR method, all the responses are transformed into a distinctive VIKOR index (VI). Neuro-genetic methods (a hybrid VIKOR-based ANN-GA) can further enhance the best possible result from the VIKOR index. During this step, the hybrid technique (VIKOR-based ANN-GA) is used to estimate an overall improvement of 9.87% in the response, and an experiment is conducted to confirm this condition of optimal machining. This work is competent enough to provide aeroengineers with an energy-efficient, satisfying workplace by lowering the machining costs and increasing productivity.
This study’s novel 13Ni400 maraging steel parts are additively manufactured through a selective laser melting process. The Taguchi approach is adopted to evaluate the combined influence of process variables (energy density), viz., laser power, layer thickness, hatch spacing, and scan speed, on responses like relative density, microhardness, surface roughness, and tensile strength. The powder and material characterization studies are conducted in terms of an optical microscope, scanning electron microscope (SEM), electron backscatter diffraction (EBSD), X-ray diffraction (XRD), and fractography analysis to explore the pre- and post-fabrication scenarios of the build parts. The consequences of energy density and process variables are studied through meticulous parametric studies. Finally, the optimum level of built parameters is identified and validated by a confirmative test predicting an average error of ~1.80%. This work is proficient in producing defect-free parts with maximum densification and improved mechanical properties for newly developed 13Ni-400 maraging steel by the selective laser melting (SLM) technique.